Aethra AF3400 User manual

FEATURES AT A GLANCE
Highly Flexible Central Office solution to reduce
both CAPEX and OPEX
Widest variety of ShDSL solutions for
ATM transports
Increased density of line module
Fast and easy delivery of E1 and fractional E1
service
Element Management System (EMS) with SNMP,
HTTP and CLI support
OVERVIEW
AF3400 is an enhanced version of the AF3000 family.
AF3400 is a modular, rack mounted ShDSL Transmission System that
provides High Speed access to Telecommunication Networks via
existing copper pairs.
In comparison with AF3000, AF3400 increases its density, provides up
to 4 pairs ShDSL line interface and up to 4 E1 interface on each line
module. AF3400 offers ATM services for the widest variety of ShDSL
solutions and allows a flexible configuration and management via
AF3400 Element Management System (EMS). AF3400 is a ETSI or 19”
rack-mountable system.
OPERATING MODES
The AF3400 is a flexible ShDSL Transmission equipment supporting
different operating modes on E1 interface:
- Frame Relay to ATM interworking
- E1-UNI over ShDSL “Cell bridging”.
TRANSPORT APPLICATIONS AND FUTURE IMPLEMENTATIONS
In FR/ATM IWF and Cell Bridging operating modes, AF3400 enables
Carriers to provide services with guaranteed QoS to users unreachable
by DSLAM allowing migration from a TDM to an ATM Network. It also
enables Carriers to save ports on their legacy HDSL and FR/ATM IW
equipment reducing costs of Network Creation.
Future implementation on AF3400 will provide grooming capability; in a
remote C.O. without ATM services, Nx64 users could be multiplexed
and transported over single E1, reducing trunks between COs.
AF 3400
SHDSLSOHORESIDENTIAL CENTRAL OFFICE ADSL VoDSL
Flexible
Modular, rack mounted ShDSL Transmission
System for ATM services (FR/ATM interworking,
Cell Bridging)
Cost-effective
Allow carriers to provide services with guaranteed
QoS to users unreachable by DSLAM and to save
resources on their legacy network infrastructure
Increased density
Each line module is equipped with 4 pairs ShDSL
and 4 E1 interface
HIGH DENSITY ShDSL MODULAR TRANSMISSION SYSTEM

TECHNICAL SPECIFICATION
COMPONENTS AND MODULARITY
•Rack: Up to 7 subracks on each
ETSI rack (ETSI ETS-300 119)
•Subrack: 8 line modules (AF3005)
one supervisory module (AF3003)
triple redundant dc battery power inputs
•Line Module (AF3005):
4 ShDSL and 4 E1 (G.703/G.704) I/F
an independent dc/ac converter
program code and configuration files
•Supervisory module (AF3003):
RS-232 and Eth 10BaseT I/F for :
Alarm reporting, event monitoring
Line module configuration and sw upgrade
E1 INTERFACE
•E1 port, full E1 UNI
(as per af-phy-0064_000) and fractional
E1UNI (as per af-phy-0130_000) are
supported
•TX
Line Code: HDB3
Nominal Impedence:75 Ohm
•RX
Line Code: HDB3
Nominal Impedence:75 Ohm
SNR: > 18dB
Jitter Tolerance: ETSI TS 101 135
Aethra, the Aethra logo and AF 3400 are trademarks, registered trademarks, or service marks of Aethra SpA Telecommunications in Italy, the United States, and/or other countries. All other company and product names may be
registered trademarks or trademarks of their respective owners. Information furnished by Aethra SpA Telecommunications and Aethra, Inc. in this datasheet is believed to be accurate. Products sold and licensed by Aethra SpA
Telecommunications and Aethra, Inc. are covered by warranty and patent indemnification provisions appearing in its purchase and license agreements. Aethra SpA Telecommunications and Aethra, Inc.
reserve the right to discontinue production and change specifications and prices at any time without notice. Copyright ©2004 Aethra SpA Telecommunications - All rights reserved. Additional regional offices are
located on our website: www.aethrausa.com. For further details about technical specifications please see “Products” on www.aethra.com
SHDSL LINE INTERFACE
•ETSI TS 101 524-1 and -2
SERVICE FUNCTIONS
•Frame Relay to ATM Interworking:
- FR/ATM PVC service interworking
(SIW) according to FRF. 8.1 either in
transparent or translated mode
- FR/ATM PVC network interworking
(NIW) according to FRF.5; supported
multiplexing modes:
(a) One-to-One: Each FR logical
connection is mapped to a single ATM
PVC
(b) Many-to-One: Multiple FR logical
connections are multiplexed into a single
ATM PVC
- Up to 128 NIW and SIW channels
supported
- Up to 10 Frame Relay Traffic Classes
configurable and usable for all the
FR-PVCs
- PVC management by Link
Management Interface (LMI) compliant
to ITU-T Q.933 Annex A or T1.617
(Annex D) and compatible with
CISCO-like implementations
•Cell Bridging:
- AF3400 acts as a VP/VC ATM switch
- On E1 port, full E1 UNI
(as per af-phy-0064.000) and fractional
E1 UNI (as per af-phy-0130.000)
supported
POWER
•Input Voltage 36-72 Vdc
•Max Power Consumption < 55 W
ENVIRONMENT
•Protections: ITU - K20, ITU – K21
•Safety: EN 60950
•EMC: ETSI EN 300 386,
EN 55022, EN 55024
•Operating conditions:ETSI 300 019-1-3,
class 3.2
•Transport conditions:ETSI 300 019-1-2,
class 2.2
•Storage conditions: ETSI 300 019-1-1,
class 1.2
DIMENSIONS
•Width 600 mm
•Deep 300 mm
•Height 2200 mm
Aethra SpA
Telecommunications
via Matteo Ricci 10
60020 Ancona - Italy
Telephone [phone]
Fax [phone]
Video 1 +39.071.2189160
Video 2 +39.071.2189701
Email: [email protected]
www.aethra.com
Aethra, Inc.
701 Brickell Avenue
Suite 1390
Miami, FL 33131 USA
Telephone [phone]
Toll Free (US only) 1.888.4.AETHRA
Fax [phone]
Video +1.305.577.3524
Email: [email protected]
Code 071073030GB Rev. 0 (02/04)