Aetina MegaEdge Series User manual

AIP-SQ67-A1
USER MANUAL
MegaEdge Series

AIP-SQ67 Series User Manual 1
Document Change History
Version Date
Description
Authors
V1.0 2022/12/12
Initial Release.
Ginnie Lin
V1.1 2023/05/29
PIN define Update
Ginnie Lin

AIP-SQ67 Series User Manual 2
Disclaimer
The information presented in this document is for informational purposes only and may contain
technical inaccuracies, omissions and typographical errors.
The information contained herein is subject to change and may be rendered inaccurate for many
reasons, including but not limited to product and roadmap changes, component and motherboard
version changes, new model and/or product releases, product differences between differing
manufacturers, software changes, BIOS flashes, firmware upgrades, or the like. Aetina assumes no
obligation to update or otherwise correct or revise this information. However, Aetina reserves the right
to revise this information and to make changes from time to time to the content hereof without
obligation of Aetina to notify any person of such revisions or changes.
Aetina makes no representations or warranties with respect to the contents hereof and assumes no
responsibility for any inaccuracies, errors or omissions that may appear in this information. Aetina
specifically disclaims any implied warranties of merchantability or fitness for any particular
purpose. in no event will Aetina be liable to any person for any direct, indirect, special or other
consequential damages arising from the use of any information contained herein, even if nvidia is
expressly advised of the possibility of such damages.
Copyright Notice
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any
means without the prior written permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original manufacturer assumes no
responsibility for its use, or for any infringements upon the rights of third parties that may result from
its use.
The material in this document is for product information only and is subject to change without notice.
While reasonable efforts have been made in the preparation of this document to assure its accuracy,
Aetina assumes no liabilities resulting from errors or omissions in this document, or from the use of
the information contained herein.
Aetina reserves the right to make changes in the product design without notice to its users.
Version 1.0
Copyright©2022 by Aetina, Inc. All rights reserved.

AIP-SQ67 Series User Manual 3
Acknowledgements
All other products’ name or trademarks are properties of their respective owners.
–NVIDIA®, the NVIDIA logo, Jetson™ and Jetson Xavier™ are trademarks of the NVIDIA
Corporation
–Intel®, Core™ are trademarks of Intel®, Corporation.
–Microsoft Windows®is a registered trademark of Microsoft Corp
–IBM and VGA are trademarks of International Business Machines Corporation.
–Ubuntu is a registered trademark of Canonical
–ESS is a trademark of ESS Technology, Inc.
All other product names or trademarks are properties of their respective owners. No ownership is
implied or assumed for products, names or trademarks not herein listed by the publisher of this
document. For more information about this and other Aetina products, please visit our web-site at:
http://www.Aetina.com/
Customer Support Overview
Contact your distributor, sales representative, or Aetina's customer service center for technical
support if you need additional assistance. Please have the following information ready before you
call:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software, etc.)
–A complete description of the problem
–The exact wording of any error messages
Visit the Aetina website at https://www.Aetina.com/support-warranty-policy.php where you can
find the latest information about the product.
Contact Information
Aetina Corporation | Headquarters
2F-1, No.237, Sec.1, Datong Rd., Xizhi Dist., New Taipei City 221, TAIWAN
Phone [phone]
Fax [phone]
Mail [e-mail]

AIP-SQ67 Series User Manual 4
Product Warranty (2 years)
Aetina warrants to you, the original purchaser, that each of its products will be free from defects in
materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by persons other
than repair personnel authorized by Aetina, or which have been subject to misuse, abuse, accident
or improper installation. Aetina assumes no liability under the terms of this warranty as a consequence
of such events.
Because of Aetina’s high quality-control standards and rigorous testing, most of our customers never
need to use our repair service. If an Aetina product is defective, it will be repaired or replaced at no
charge during the warranty period. For out of warranty repairs, you will be billed according to the cost
of replacement materials, service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU speed, Aetina
products used other hardware and software used, etc.) Note anything abnormal and list any
onscreen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any helpful
information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise authorization)
number from your dealer. This allows us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy of the proof of purchase date (such as your sales receipt) in a
shippable container. A product returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.
ESD Warning
This product, like all electronic products, uses the product that can be damaged by electrostatic
discharge (ESD). When handling, care must be taken so that the devices are not damaged. Damage
due to inappropriate handling is not covered by the warranty. The following precautions must be taken:
–Do not open the protective conductive packaging until you have read the following and are at
an approved anti-static workstation.
–If working on a prototyping board, use a soldering iron or station that is marked as ESD-safe.
–Always disconnect the product from the prototyping board when it is being worked on.
–Always discharge yourself by touching a grounded bare metal surface or approved anti-static
mat before picking up an ESD - sensitive electronic component.
–Use an approved anti-static mat to cover your work surface.

AIP-SQ67 Series User Manual 5
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this manual for future
references:
1. All cautions and warnings on the equipment should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything over the power
cord.
4. For plug-in equipment, the power outlet socket must be located near the equipment and must be
easily accessible.
5. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
6. Always completely disconnect the power before working on the system’s hardware.
7. Keep this equipment away from humidity.
8. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause
damage.
9. The openings on the enclosure are for air convection. Protect the equipment from overheating.
DO NOT COVER THE OPENINGS.
10. Be sure that the room in which you choose to operate your system has adequate air circulation.
Ensure that the chassis cover is secure.
11. The chassis design allows cooling air to circulate effectively. An open chassis permits air leaks,
which may interrupt and redirect the flow of cooling air from internal components.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. If the equipment is not used for a long time, disconnect it from the power source to avoid damage
by transient overvoltage.
14. Never open the equipment. For safety reasons, the equipment should be opened only by qualified
service personnel.
15. If any of the following situations arises, please the contact our service personnel:
–Damaged power cord or plug
–Liquid intrusion to the device
–Exposure to moisture
–Device is not working as expected or in a manner as described in this manual
–The device is dropped or damaged
–vi. Any obvious signs of damage displayed on the device

AIP-SQ67 Series User Manual 6
Box Contents
Item
Quantity
MegaEdge System
1
Terminal Plug
1
SATA Tray Screws
8
Bracket, mounting
2

AIP-SQ67 Series User Manual 7
Contents
1.Product Specification……………………………………… 7
1.1 Features……………………………………………………………………. 8
1.2 Specifications.……………………………………………………………..9
2.Hardware Information……………………………………. 10
2.1 I/O Interface……………………………………………………………… 10
2.2 Component Installation……………….....................………………….12
2.3 System setup…………………..........................………………………..16
2.4 Removing Power……………………...................................................16
2.5 System Dimensions……………………......................………………..17
3.BIOS Setup…………………………………………………. 18
3.1 Beep Codes……………………......................………………………….18
3.2 Entering BIOS Setup……………………......................……………….19
3.3 BIOS Controls……………………......................……………………….19
3.4 BIOS Main Tab……………………......................……………………....20
3.5 BIOS Advanced Tab……………………......................………………..21
3.6 BIOS Chipset Tab……………………......................…………………..26
3.7 BIOS Security Tab……………………......................………………….29
3.8 BIOS Boot Tab……………………......................………………………30
4. EdgeEye……………………………………………............31

AIP-SQ67 Series User Manual 8
1. Product Specifications
1.1 Features
With the advantages of high computing performance, High stability, and high flexibility
EdgeEye, the Aetina Administration platform for device monitor
Rich I/O interface design for AI Image Input application
Two swappable 2.5" hard drive bays

AIP-SQ67 Series User Manual 9
1.2 Specifications
System Specifications
Specification AIP-SQ67-A1
Processor Supports Intel® 12th Gen Core™ i7/i5 processors, TDP under 65W
Chipset Intel® Q670E Chipset
Memory Supports 2x DDR5 4800MHz SO-DIMM, Max. Capacity 32 GB/Per DIMM,
Total 64 GB
GPU(Optional) MXM Type A、Type B、Type B+ (Supports MXM PCIe Gen4 x16)
Storage 2x 2.5" SATAIII SSD/HDD
2x M.2 M Key Slot, Support PCIe x4 for NVME, Size 2280/SATA
Front I/O
6x USB3.2 Gen2 (10G)
1x USB C (20G)
5x RJ45 LAN Connector(1+4),2.5G bps
4x RS-232/RS-422/RS-485 (COM1~4)
1x 7-bits GPIO
Rear I/O
4x Display Port (DP++, From MXM Port A/B/C/D)
1x Display Port(DP++, From CPU)
1x Audio Jack, Support Line Out/Mic In
2x CAN Bus-Isolation 2.0B(optional)
2x USB2.0
1x OOB
Expansion
1x MXM Slot
2x M.2 M Key Slot, Support PCIe Gen4x4+ SATA Interface for NVME, Size 2280
(w/ Type B/B+ GPU Card needs to use wide temp. M.2 SSD)
Power Input 1x DCIN 24V (Terminal Block)
Dimension (WxDxH) 270.0 x 148.2 x 280.0mm
Net Weight 5.5 kg (12.13 lb)
Temperature Operating: 0 to 50°C
Humidity Operating: 5 to 90% RH；Storage: 5 to 90% RH
OS Support Ubuntu 22.04、Windows 10
Vibration (OP)3Grms, IEC60068-2-64, Random,5 ~ 500 Hz ,1Hr / Axis
(NON-OP)5Grms, IEC60068-2-64, Random,5 ~ 500 Hz ,1Hr / Axis
Shock (OP)10G, IEC 60068-2-27, Half Sine, 11 ms Duration
(NON-OP)30G, IEC 60068-2-27, Half Sine, 11 ms Duration
Certification CE/FCC

AIP-SQ67 Series User Manual 10
2. Hardware Information
2.1 I/O Interface

AIP-SQ67 Series User Manual 11
I/O Connectors
Location I/O Connector Description
Front
Power On/Off Power Push-button
USB ports 6x USB3.2 Gen2 Type-A connector(10G)
1x USB-C (20G)
LAN 5x RJ45 LAN connector Act/Link LED, Speed LED 10-Off /
100-Green / 1000-Yellow(2.5G)
Digital IO 1x 7-bits GPIO
COM Ports 4x COM(RS232/RS485/RS422)
SATA III SSD 2x 2.5" SATAIII SSD/HDD
Rear
USB ports 2x USB2.0 Gen2 Type-A connector
Power input DC-in 24V / 4-pin Terminal Block
Display Port 5x DP Ports (down port from CPU DDI1, up port from MXM
A port)
Audio 1x Audio jacks, support Line out/Mic
CAN(optional) 2x CAN Bus-Isolation 2.0B
OOB Out-of-Band

AIP-SQ67 Series User Manual 12
2.2 Component Installation
Accessing the System
The system features a lockable top cover. Open the cover to access the motherboard. Remove the
system cover to access other system components. The system can be accessed without powering
down the system.
1. Remove 12 screws on the system cover.
2. Flip open the cover to access the system component.
3. Slightly slide the system cover.
4. Lift the top cover off the chassis.

AIP-SQ67 Series User Manual 13
CPU Cooler Installation
1. Remove the top cover as above.
2. Assemble 4 screws (on the CPU Cooler) to fix the cooler on the SQ67 system.

AIP-SQ67 Series User Manual 14
Memory Installation
Slowly insert the DRAM modules into the slots, ensuring that the clips on both sides of the slot
securely click into place. When removing the modules, the clips on either side of the module must
first be un-clipped.

AIP-SQ67 Series User Manual 15
Storage Installation (2.5” HDD/SSD)
1. Loosen 2 thumb screws on hard drive bay, then pull out.
2. Install HDD/SSD with 4 screws on the HDD/SSD tray.
3. Push back the hard drive bay into the system and secure with thumb screws.

AIP-SQ67 Series User Manual 16
2.3 Setup
1. Before you start
Thank you for choosing our product. Before you start using the system, please make sure you follow
the instructions below.
Use DP1/2/3/4 connector setting when you already installed MXM card.
Use DP5 connector setting without MXM card in the system.
2. Boot-up
Press the power button to power on the device and boot up when plugging in the power cable.
2.4 Removing Power
Use the following procedure to ensure that power has been removed from the system.
1. Use the operating system to power down the system.
2. After the system has completely shut down, disconnect the power cord from the power
source.
3. Disconnect the power cord from the chassis.

AIP-SQ67 Series User Manual 17
2.5 System Dimensions

AIP-SQ67 Series User Manual 18
3. BIOS Setup
3.1 Beep Codes
PEI Beep Codes
Description
1 Memory not Installed
1 Install Per Memory routine in PEI Core was called twice
2 Recovery started
3 DXEIPL was not found
3 DXE Core firmware volume was not found
4 Recovery failed
4 S3 resume failed
7 Reset PPI is not available
DXE Beep Codes
Description
1 Invalid password
3 Some of the architectural protocols are not available
4 No console input devices found
5 No console output devices found
6 Flash update failed
7 Reset protocol is not available
8 Platform PCI resource requirements cannot be met

AIP-SQ67 Series User Manual 19
3.2 Entering BIOS Setup
To enter the BIOS setup, press the DELETE key during system boot.
3.3 BIOS Controls
The BIOS is entirely controlled by the keyboard, using the following keys:
Hot Key
Description
Left/right Switch selected menu
Up/down Select item
Enter Confirm selection or open sub menu
Plus/minus or F5/F6 Change the value of a setting
F1 Display help screen
F2 Restore previous value
F9 Load optimized default
F10 Save the selected setting
ESC Discard changes and exit BIOS