Aewin AW-C661 Installation and operation manual

QUICK SETUP C661 - 1 -
AW-C661 Socket-370 5.25” Embedded
SBC
STARTUP MANUAL
Specifications
General Functions
 CPU: Intel®socket 370Celeron™/
Pentium®III/Tualatin & VIA C3
processor up to 100MHz FSB
 BIOS: Award®256KB Flash BIOS
 Cache: 128/256KB on-chip cache
 Chipset: Intel®440BX+82371EB
 I/O Chipset: Two Winbond
w83977EF-AW
 Memory: Two 144-pin SO-DIMM
socket up to 512MB
 Enhanced IDE: Up to two IDE
devices (UDMA 33)
 FDD interface: Supports one 34-pin
header
 Parallel port: Supports
SPP/ECP/EPP
 Serial port: Three RS-232 and one
RS-232/422/485 serial ports
 IR interface: Supports one IrDA
Tx/Rx header
 KB/Mouse connector: Supports PS/2
keyboard and mouse
 USB connectors: Supports two USB
ports
 Battery: Lithium battery for data
retention up to 10 years
 Watchdog Timer: Supports software
selectable timeout interval
 System Monitoring: Software
programmable
 PC/104 connector: One PC/104
connector
 PCI slot: One 32-bit PCI slot
 Digital I/O: Supports eight TTL
input and output pins
 SMBus connector: Supports SMBus
LCD interface
 Power management: Supports ATX
power supply, PC97, LAN wake up,
and modem ring-in functions
Flat Panel/CRT Interface
 Chipset: SMI Lynx3DM
 Display memory: Built-in
4MB/8MB for Lynx3DM SMI721
 Display type: Supports CRT and
LCD displays
 Resolution: Supports up to
1024 x 768 16M colors and CRT
monitors up to 1280 x 1024 16M
colors
TV-Out Interface (option)
 TV Format: Supports NTSC,
NTSC-EIA (Japan) and PAL signals
format
 Output connector: Supports RCA
(Composite) video and S-video
connector
 Resolution: Supports 640 x 480 and
800 x 600 resolutions
Ethernet Interface
 Chipset: Three Intel® 82559ER or
Realtek RTL8139C (option)
 Ethernet interface: PCI 100/10MB
Ethernet controller
SSD Interface
 One 50-pin CompactFlash™ socket
PCI Sound Interface
 Chipset: ESS Solo-1
 Audio controller: SoundBlaster and

QUICK SETUP C661 - 2 -
SoundBlaster Pro Compatible
 Audio interface: Mic in, Line in,
Speaker out and CD audio in
 Software Driver: Supports for
Win95/98/NT
Mechanical and Environmental
 Power supply voltage: +5V(4.75V to
5.25V), +12V(11.4V to 12.6V)
 Max. power requirements: 7A @ 5V,
200mA @ +12V
 Operating temperature: 32 to 140℉
(0 to 60℃)
 Board size: 8”(L) x 5.75”(W)
(203mm x 146mm)
 Weight: 0.6lb. (0.3Kg) (bare)
For more information on AW-C661 or
Aewin products, please visit our website
http://www.aewin.com.tw
For Technical Supports or Free Catalog,
please send mail to
[email protected]
AW-C661 Package
Before you begin installing your
AW-C661, please make sure that the
following materials have been shipped
1. AW-C661
2. 46-I00IDE-00: 2.5” & 1.8” IDE
Cable
3. 46-IFDC01-00: Floppy Cable
4. 46-IIO001-00: COM1-COM4 Ports
Cable
5. 46-ILPT01-00: Printer Cable
6. 46-IPOWER-00: Auxiliary Power
Cable
7. 46-IPS200-00: KB/Mouse Cable
8. 46-IVGA01-00: CRT VGA Cable
OptionalCableList
1. 46-IAUD01-00: Audio Cable
2. 46-ILAN01-00: 10/100Base-T LAN
Cable
3. 46-TV0001-00: TV-Out Cable
4. 46-IUSB01-00: USB Port Cable
If any of these parts are missing or
damaged, contact your distributor or
sales representatives immediately.
Note: For detailed contents of the
AW-C661, please refer to the enclosed
CD-ROM

QUICK SETUP C661 - 3 -
AW-C661 Board Dimension
Component Side
Solder Side

QUICK SETUP C661 - 4 -
AW-C661 Board Layout
AW-C661 Location of Connectors

QUICK SETUP C661 - 5 -
ListofConnectors
Connectors Description Connectors Description
CN1 Speaker Connector CN16 PS/2 Mouse/KB Connector
CN2 -5V/-12V Power
Connector
CN17 USB Connector
CN3 ATX Power Control
Connector
CN18 PC/104 Connector
CN4 SMBus Connector CN19 TV-Out Connector
CN5 Front Panel Connector CN20 GPIO Connector
CN6 LAN LEDs CN21 Notebook Type FDD
Connector
CN7 LAN1 Connector CN22 Infrared Connector
CN8 LAN 2 Connector CN23 CPU Fan Connector
CN9 LAN 3 Connector CN24 CRT Display Connector
CN10 CD Audio Input
Connector
CN25, CN26 Flat Panel Connector
CN11 Audio Connector CN27 2.00mm pitch IDE Connector
CN12 Main Power Connector CN28 Isolated Digital I/O Connector
CN13 34-pin FDD Connector J1, J2 SO-DIMM Sockets (Solder
Side)
CN14 COM Ports Connector CF-Socket CF Socket (Solder Side)
CN15 Parallel Port Connector
CN4: SMBus Connector
1 6
Pin Signal
1 Ground
2 +5V
3 SMBCLK
4 SMBDATA
5 +12V
6 NC
CN19: TV-Out Connector
15
Pin Signal
1 LUMA
2 CHROMA
3 Ground
4 Ground
5 COMP

QUICK SETUP C661 - 6 -
CN5: Front Panel Connector
Pin Signal
1 Ground
2 +5V
3 IDEACT
4 +5V
5 Reset
6 Ground
7 PANSWIN
8 Ground
CN20: GPIO Connector
Pin Signal
1 +5V
2 GPIO0
3 GPIO1
4 GPIO2
5 GPIO3
6 GPIO4
7 GPIO5
8 GPIO6
9 GPIO7
10 Ground
CN28: Isolated Digital I/O Connector
1 5
Pin Signal
1 +5V
2 ISO_OUT0
3 ISO_OUT1
4 +12V
5 Ground

QUICK SETUP C661 - 7 -
CN25, 26: Flat Panel Connector
1 39
CN25: DF13A-40DP-1.25V CN26: DF13A-40DP-1.25V
Pin Signal Pin Signal Pin Signal Pin Signal
1 VDDSAFE5 2 VDDSAFE5 1 VDDSAFE5 2 VDDSAFE5
3 Ground 4 Ground 3 Ground 4 Ground
5 VDDSAFE3 6 VDDSAFE3 5 VDDSAFE3 6 VDDSAFE3
7 NC 8 Ground 7 NC 8 Ground
9 LCD_FD24 10 LCD_FD25 9 LCD_FD0 10 LCD_FD1
11 LCD_FD26 12 LCD_FD27 11 LCD_FD2 12 LCD_FD3
13 LCD_FD28 14 LCD_FD29 13 LCD_FD4 14 LCD_FD5
15 LCD_FD30 16 LCD_FD31 15 LCD_FD6 16 LCD_FD7
17 LCD_FD32 18 LCD_FD33 17 LCD_FD8 18 LCD_FD9
19 LCD_FD34 20 LCD_FD35 19 LCD_FD10 20 LCD_FD11
21 LCD_FD36 22 LCD_FD37 21 LCD_FD12 22 LCD_FD13
23 LCD_FD38 24 LCD_FD39 23 LCD_FD14 24 LCD_FD15
25 LCD_FD40 26 LCD_FD41 25 LCD_FD16 26 LCD_FD17
27 LCD_FD42 28 LCD_FD43 27 LCD_FD18 28 LCD_FD19
29 LCD_FD44 30 LCD_FD45 29 LCD_FD20 30 LCD_FD21
31 LCD_FD46 32 LCD_FD47 31 LCD_FD22 32 LCD_FD23
33 Ground 34 Ground 33 Ground 34 Ground
35 RLVDSCLK 36 LCD_FD23 35 LCD_FPSCLK 36 FP/FVSYNC
37 LCD_FD15 38 LCD_FD22 37 DE 38 LP/FHSYNC
39 NP_FPEN 40 VBIASEN 39 NP_FPEN 40 VAIASEN

QUICK SETUP C661 - 8 -
LocationofJumpers
ListofJumpers
Jumper Signal Jumper Signal
1 COM2 RS-232/422/485 Select 4 Watch Dog Timer Action Select
2 COM3/COM4 RI/Voltage Select 5 Clear CMOS
3 COM1/COM2 RI/Voltage Select SW1 Panel Type Select
JP1: COM2 RS-232/422/485 Selector (Default: RS-232)
Setting COM Port
5-6, 9-11, 10-12, 15-17,
16-18
RS-232 (Default)
3-4, 7-9, 8-10, 13-15, 14-16 RS-422
1-2, 7-9, 8-10 RS-485

QUICK SETUP C661 - 9 -
JP2: COM3/COM4 RI/Voltage Selector
Pin Setting COM Port RI/Voltage
11-12 COM4 +12V
9-10 COM4 +5V
7-8 COM4 RI (default)
5-6 COM3 +12V
3-4 COM3 +5V
1-2 COM3 RI (Default)
JP3: COM1/COM2 RI/Voltage Selector
Pin Setting COM Port RI/Voltage
11-12 COM2 +12V
9-10 COM2 +5V
7-8 COM2 RI (default)
5-6 COM1 +12V
3-4 COM1 +5V
1-2 COM1 RI (Default)
JP4: Watchdog Timer/Action Select
Setting Define
1-2 IRQ11
2-3 Reset System
(Default)
JP5: Clear CMOS
Setting Define
1-2 Normal
Status
(Default)
2-3 Clear
CMOS

QUICK SETUP C661 - 10 -
SW1: Panel Type Select
Pin No.Setting
1 2 3 4
Resolution/Type
On On On On 640 x 480 (18-bit) TFT
On On On Off 640 x480 (16-bit) DSTN
On On Off On 800 x 600 (18-bit) TFT
On On Off Off 800 x 600 (16-bit) DSTN
On Off On On 1024 x 768
(18-bit)
TFT
On Off On Off 1024 x 768
(24-bit)
DSTN