Advantech PCM-9363 Installation and operation manual

PCM-9363 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1 PCM-9363 SBC
1 Startup Manual
1 Utility CD
1 Mini jumper pack p/n: 9689000002
1 SATA cable p/n: 1700008941
1 Keyboard/Mouse cable p/n: 1703060191
1 Audio cable p/n: 1700018839
1 COM2 cable p/n: 1701140201
2 USB 2 port cables p/n: 1703100121
1 SATA power cable p/n: 1703150102
1 LPT cable p/n: 1700260250p/n: 17002602501700260250
1 COM port cable p/n: 1700100250
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1: For detailed contents of PCM-9363, please refer
to information on the enclosed CD-ROM (in PDF
format).
Note 2: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
PCM-9363 Intel®AtomTM N455/D525 3.5” SBC, DDR3,
24-bit LVDS, CRT or HDMI, 2 Giga LANs, Mini PCIe,
3 COMs
Startup Manual
General
CPU: Intel® Atom™ Processor N455 1.66 GHz / D525
1.8 GHz
System Chipset: Intel® Atom™ N455/D525+ICH8M
System Memory: DDR3 800 MHz up to 2 GB for N455,
and D525 up to 4 GB
BIOS: AMI 16 Mbit Flash BIOS
Watchdog Timer: 255 level interval timer
Expansion Interface: Mini-PCIe
Battery: Lithium 3 V/220 mAH
SATA interface: Two SATA ports supporting 300 MB/s
Keyboard/mouse connector: Internal pin-header sup-
ports KB/mouse use
USB: Six USB 2.0 compliant universal serial bus ports
Audio: High Definition audio (HD), line-in, line-out, mic-in
GPIO: 8-bit general purpose Input/Output
CompactFlash®Card
Supports one 50-pin socket for CFC type I/II
VGA/LVDS Interface
Chipset: Embedded Gen3.5+ GFX Core
Memory Size: Up to 224 MB of dynamic video memory
allocation
Resolution:
- CRT: Intel Atom N455 up to 1400 x 1050 (SXGA)
Intel Atom D525 up to 2048 x 1536
- LVDS: Single channel 24-bit LVDS up to WXGA
1366 x 768
LVDS LCD:
- Support 18 or 24-bit LVDS LCD
Dual Display: CRT+LVDS
Ethernet Interface
LAN1 Intel® 82567V Giga LAN,
LAN2 Intel® 82583V Giga LAN® 82583V Giga LAN82583V Giga LAN
Ethernet interface: IEEE 802.3,IEEE 802.3u, IEEE
802.3x, IEEE 8023y, IEEE802.ab (100 Mbps) protocol
compatible
Mechanical and Environmental
Dimensions: 146 x 102 mm (5.7” x 4”)
Mechanical Drawings are on pages 5 and 6.
Power Supply Type: AT/ATX
Power Requirement: Single 12 V input
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Specications Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/suppot/
This manual is for the PCM-9363 Series Rev. A1
Part No. 2006936300
Printed in China
1st Edition
December 2010

2 PCM-9363 Startup Manual
Specications
Power Consumption:
- Typical in XP mode:
N455/DDR3 1 GB : 0.74 A, 12 V
D525/DDR3 1 GB : 0.86 A, 12 V
- Max in HCT:
N455/DDR3 1GB : 0.86 A, 12 V
D525/DDR3 1GB : 1.18 A, 12 V
Operating Temperature: 0 ~ 60° C (32 ~ 140° F)
Weight: 0.85 kg (reference weight of total package)
The board has a number of jumpers that allow you to
configure your system to suit your application.
The table below lists the function of each of the jumpers and
connectors.
Jumpers
Label Function
J2
COM2 Setting
J3
AT / ATX Power SEL
J4
Clear CMOS
J5
Panel Voltage SEL
•
•
•
Connectors
Label Function
CN1
Audio
CN2
SATA
CN3
SATA
CN4 GPIO
CN5 HDD & PWR LED
CN6 12 V Power Input
CN8 COM3
CN10 PS2
CN11 SMBus
CN12 COM2
CN13 Inverter Power Output
CN14 Internal USB
CN15 Internal USB
CN16 18 or 24-bit LVDS Panel
CN17 Single LAN (Optional to replace dual LAN)
CN18 LAN1
CN19 LAN2
CN20 Power Switch (Low Active )
CN21 LPT
CN22 HDMI (Optional)
CN23 Reset
CN24 External USB
CN25 External USB
CN26 COM1
CN27 VGA
CN28 Mini PCIe lock
CN29 Mini PCIe slot
CN30 DDR3 SODIMM
CN31 BIOS Socket
CN32 CF
CN36 SATA Power
Jumpers and Connectors
Jumpers and Connectors
The computer is provided with a battery-powered real-time
clock circuit. There is a danger of explosion if battery is
incorrectly replaced. Replace only with same or equivalent
type recommended by the manufacturer. Discard used bat-
teries according to manufacturer’s instructions.
Caution

PCM-9363 Startup Manual 3
J4
Clear CMOS
Part Number 1653003101
Footprint
HD_3x1P_79_D
Description PIN HEADER 3*1P 180D(M) 2.0 mm DIP
SQUARE W/O Pb
Setting
Function
(1-2)* Normal
(2-3) Clear CMOS
*: default
J5
PAN VOL SEL
Part Number 1653003101
Footprint
HD_3x1P_79_D
Description PIN HEADER 3*1P 180D(M) 2.0 mm DIP
SQUARE W/O Pb
Setting
Function
(1-2) +5V
(2-3)* +3V
*: default
Jumpers Settings
J2
COM2 Setting
Part Number 1653003260
Footprint
HD_3x2P_79
Description PIN HEADER 3*2P 180D(M) 2.0 mm
SMD SOUARE PIN
Setting
Function
(1-2)* RS232
(3-4) RS485
(5-6) RS422
*: default
J3
AT / ATX Power SEL
Part Number 1653002101
Footprint
HD_2x1P_79_D
Description PIN HEADER 2*1P 180D(M)SQUARE
2.0 mm DIP W/O Pb
Setting
Function
(1-2)* AT Power SEL
EMPTY ATX Power
*: default
Jumpers and Connectors

4 PCM-9363 Startup Manual
Figure 1: PCM-9363 Jumpers and Connectors (Component Side)
Figure 2: PCM-9363 Jumpers and Connectors (Solder Side)
PCM-9363 Jumpers and Connectors

PCM-9363 Startup Manual 5
Figure 3: PCM-9363 Mechanical Drawing (Component Side)
Figure 4: PCM-9363 Mechanical Drawing (Solder Side)
PCM-9363 Mechanical Drawing

6 PCM-9363 Startup Manual
PCM-9363 Mechanical Drawing
Figure 5: PCM-9363 Mechanical Drawing (Side View)
Figure 6: PCM-9363 HDMI Mechanical Drawing (Top View)