Aewin AW-F703 User manual

Pentium 4 Full-Size CPU Card
With VGA, LAN, TV-out , DVI Interface &Audio
PCI/ISA Bus, PICMG Compliant
User’s Manual
Version 1.1

i
© Copyright 2002.All Rights Reserved
Manual edition 1.0, Jan.2003
This document contains proprietary information protected by copyright. All rights
are reserved, no part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without prior written permission of the
manufacturer.
The content of this manual is intended to be accurate and reliable, the original
manufacturer assumes no responsibility for any inaccuracies that may be contained in
this manual. The original manufacturer reserves the right to make improvements to
the products described in this manual at any time without prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International
Business Machine Corporation
Intel and Pentium 4 are registered trademarks of Intel Corporation
Award is a trademark of Award Software International, Inc
ATI is a trademark of ATI Technologies Inc
Microsoft, Windows, Windows NT and MS-DOS are ether trademarks or registered
trademarks of Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and
may be trademarks and/or registered trademarks of their respective companies.
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this manual, the
manufacturer and distributor assume no liability resulting from errors or omissions in
this manual, or from the use of the information contained herein.

ii
Table of Contents
Chapter 1. General Information
1.1 Introduction---------------------------------------------------------------------------------1
1.2 Specification---------------------------------------------------------------------------------1
1.3AW-F703 Package--------------------------------------------------------------------------2
1.4 Board Layout--------------------------------------------------------------------------------3
1.5 Board Dimension---------------------------------------------------------------------------4
Chapter 2. Connectors Location and Configuration
2.1 Connectors/Jumpers Location and Define--------------------------------------------5
2.2 Installing CPU------------------------------------------------------------------------------6
2.3 Installing System Memory----------------------------------------------------------------6
2.4 Connector and Jumpers Settings------------------------------------------------------ 7
Chapter 3. BIOS Setup-----------------------------------------------------------------------18
Chapter 4. Drivers and Utilities Installation---------------------------------------------38
AppendixA. Programming the Watchdog Timer--------------------------------------44
Appendix B.AC-97 Audio Kit Optional--------------------------------------------------45
Appendix C: System Resources------------------------------------------------------------48
Appendix D: Order Information-----------------------------------------------------------51
Appendix E. Optional Cable List----------------------------------------------------------52

User’s manual
AW-F703
1
Chapter 1. General Information
1.1 Introduction
The AW-F703 is fully function of socket 478 Pentium® 4 CPU Card, which is
PCI/ISA bus and PICMG compliant. The AW-F703 with Intel® 845PE and ICH4
chipset supports Intel® Pentium® 4 processors with 533MHz system bus, with two
184-pin DDR DIMM sockets for DDR SDRAM to 2Gbytes. The AW-F703 supports
one Ethernet Interface, two USB 2.0 compliant ports. Furthermore, the AW-F703 has
high speedATI Radeon 7000 AGP 4X 32M/64M onboard; it supports 32/64MB DDR
memory, CRT display, TV-out and DVI interface optional.
The onboard features include one RS-232 and one RS-232/422/485 serial port, one
bi-directional parallel port with SPP,ECP and EPP modes supported, also with
watchdog timer and ISAhigh driving capability. In addition, theAW-F703 supports
sound interface by optional daughter card.
1.2 Specification
Specifications 
General Functions
CPUSocket 478 Pentium® 4 processor with 533MHz system bus
BIOSAward® 4Mbit Flash BIOS
ChipsetIntel 845PE + ICH4
I/O ChipsetWinbond® 83627HF-AW
Memory
Onboard two 184-pin DDR DIMM sockets supports DDR333 and up to
2Gbytes
Enhanced IDE
Support up to four IDE devices. Ultra DMA 33/ 66/100 mode with data
transfer rate up to 100MB/sec.
FDD interfaceSupports 34-pin header up to two floppy disk drives
Parallel portOne bi-directional parallel port. Supports SPP/ECP/EPP
Serial portOne RS-232 and one RS-232/422/485 serial ports
IR interfaceSupport one IrDA Tx/Rx header
KB/Mouse
connector
6-pin Mini-DIN connector supports PS/2 keyboard & mouse

User’s manual
AW-F703
2
USB connectorsSupports two USB 2.0 compliant ports
BatteryLithium battery for data retention up to 10years(in normal condition)
Watchdog Timer
Can generate a system reset, or IRQ11. Support 1-256 second
selectable timeout interval
System Monitoring Built in W83627HF-AW; supports temperatures, Fan speed, and
voltages monitoring
Bus interfacePCI/ISA bus, PICMG compliant
Power management Supports ATX power supply; LAN wake up & modem ring-in functions
VGA Interface
Chipset
ATI Radeon 7000 4X AGP; Supports 32/64MB DDR memory, CRT
display. TV-out and DVI interface optional.
Ethernet Interface
Chipset 
One 82559ER 100/10Base-Tx or 82540EM 1000/100/10Base-Tx Fast
Ethernet controller
Sound Interface (Optional daughter card) 
Chipset AC 97 codec (ADI 1881A)
Audio interface Mic in, Line in, Speaker out and CD audio in
ISA High DriveISA High Driving capability up to 64 mA
Mechanical and Environmental
Power supply
voltage 
5V (4.75V to 5.25V), +12V(11.4V to 12.6V),-12V (-11.4V to -12.6V),
5VSB (4.75V to 5.25V) 
Max. power
requirements
10A @ 5 V, 10A @ +12 V, 60mA @ -12V (Max.), 1.5A@5VSB
Operating
temperature 
32 to 140°F (0 to 60°C)
Weight13.3"(L) x 4.8"(W) (338mm x 122mm) 
1.3 AW-F703 Package
Please make sure that the following items have been included in the
package before installation.
1. AW-F703 Socket 478 Single Board
2. Quick Installation Guide
3. Cable: Please refer to Appendix C Optional Cables

User’s manual
AW-F703
3
4. CD-ROM which contains the following folders:
(1) Manual
(2) LAN Driver
(3) Tools
(4) Chipset Driver
(5) VGA Driver
(6) Sound Driver
(7) USB 2.0 Driver
If any of these items are missing or damaged, please contact your dealer
from whom you purchased the board at once. Save the shipping
materials and carton in the event that you want to ship or store the board
in the future. After you unpack the board, inspect it to assure an intact
shipment. Do not apply power to the board if it appears to have been
damaged.
Leave the board in its original packing until you are ready to install
Precautions
Please make sure you properly ground yourself before handling the
AW-F703 board or other system components. Electrostatic discharge
can be easily damage the AW-F703 board.
1. Do not remove the anti-static packing until you are
ready to install the AW-F703 board.
2. Ground yourself before removing any system
component from it protective anti-static packaging.
To ground yourself, grasp the expansion slot
covers or other unpainted parts of the computer
chassis.
3. Handle the AW-F703 board by its edges and avoid
touching its component.
1.4Board Layout

User’s manual
AW-F703
4
1.5Board Dimension

User’s manual
AW-F703
5
Chapter 2. Connectors Location and Configuration
2.1 Connectors/Jumper Location and Define
Connector Define Connectors Define
CN1 TV-Out Connector CN11 COM2 Connector
CN2 5VSB Connector CN12 DVI Connector
CN3 Front Panel CN13 IR Connector
CN4 Main Power Connector CN14 COM1 D-Sub Connector
CN5 IDE2 Connector CN15 Internal Keyboard Connector
CN6 IDE1 Connector CN16 KB/MS Connector
CN7 P4 12V Power CN17 VGA D-Sub Connector
CN8 Floppy Connector CN18 AC-97 Connector
CN9 LPT Connector CN19 LAN1 Connector
CN10 USB Connector CN20 FAN Connector
JP1 RS232/422/485 Select CN21 FAN Connector
JP2 Watchdog Select JP3 CMOS Setting

User’s manual
AW-F703
6
2.2 Installing CPU
The AW-F703 with 478 socket supports Intel® Pentium® 4 processors, up to 533MHz
system bus.
The m478PGA form factor is a chip packaging designed for the Intel® Pentium 4
processors up to 533MHz System Bus. On the m478PGApackage, the processor’s
silicon core faced up, and is expose. This allows the core to have direct contact with
a heatsink/fan.
Locating Pin 1 on your CPU and ZIPSocket
All Pentium 4 CPUs use a small golden triangle to indicate the location of pin 1.
One the corner to the right of pin 1 is an orange dot.
2.3 Installing System Memory
The AW-F703 supports two 184-pin DDR DIMM sockets, memory up to 2Gbytes.
To insert a DDR DIMM Memory: Please align the module with the socket key and
press down until the levers at each end of the socket snap close up.

User’s manual
AW-F703
7
Note: There is only one direction for installing a module in the socket. Do not
attempt to force the module into the socket incorrectly.
To remove a DDR DIMM Memory: Press down on the levers at both end of module
until the module pops out.
2.4 Connector and Jumper Settings
CN1: TV-Out Connector
Pin Define
1 LUMINANCE OUT
2 CROMIANCE OUT
3 Ground
4 Ground
5 COMPOSITE OUT

User’s manual
AW-F703
8
CN2: 5VSB Connector
Pin Define
1 +5V
2 PS-ON*
3 Ground
CN3: Front Panel Connector
Pin Define Pin Define
1 Power LED+ (+5V) 2 Power LED – (GND)
3 IDE_LED+ (+5V) 4 IDE_LED- (ACTIVE)
5 POWER ON SWITCH+ 6 POWER ON SWITCH- (GND)
7 RESET SWITCH+ 8 RESET SWITCH- (GND)
Pin 1-2: this 2-pin connector connects to the case-mounted power LED
Pin 3-4: this 2-pin connector connects to the case-mounted HDD LED &
indicates hard disk drive activity
Pin 5-6: this 2-pin connector connects to case-mountedATX power button
Pin 7-8: this 2-pin connector connects to case-mounted Reset Switch, you can use
it to reboot the system
CN4: Main Power Connector
Pin Define
1 +12V
2 Ground

User’s manual
AW-F703
9
3 Ground
4 +5V
CN5: IDE2 Connector
Pin Define Pin Define
1 PCIRST#0 2 Ground
3 SDD7 4 SDD8
5 SDD6 6 SDD9
7 SDD5 8 SDD10
9 SDD4 10 SDD11
11 SDD3 12 SDD12
13 SDD2 14 SDD13
15 SDD1 16 SDD14
17 SDD0 18 SDD15
19 Ground 20
21 SDREQ 22 Ground
23 SDIOW# 24 Ground
25 SDIOR# 26 Ground
27 SIORDY 28 DECECT
29 SDDACK# 30 Ground
31 IRQ15 32 NC
33 SDA1 34 DECECT
35 SDA0 36 SDA2
37 SDCS#1 38 SDCS#3
39 IDEACTS# 40 Ground
CN6: IDE1 Connector

User’s manual
AW-F703
10
Pin Define Pin Define
1 RESET* 2 Ground
3 DATA7 4 DATA8
5 DATA6 6 DATA9
7 DATA5 8 DATA10
9 DATA4 10 DATA11
11 DATA3 12 DATA12
13 DATA2 14 DATA13
15 DATA1 16 DATA14
17 DATA0 18 DATA15
19 Ground 20 KEY PIN
21 DREQ 22 Ground
23 DIOW* 24 Ground
25 DIOR* 26 Ground
27 IOCHRDY 28 CSEL
29 DACK* 30 Ground
31 IRQ14 32 N/C
33 A1 34 DETECT
35 A0 36 A2
37 HD SELECT 0* 38 HD SELECT 1*
39 ACTIVE* 40 Ground
CN7:ATX Power 12V
Pin Define Pin Define
4 +12V 2 Ground
3 +12V 1 Ground
CN8: Floppy Connector
Pin Define Pin Define
1 Ground 2 DENSITY SELECT0*

User’s manual
AW-F703
11
3 Ground 4 NC
5 Ground 6 DENSITY SELECT1*
7 Ground 8 INDEX*
9 Ground 10 MOTOR ENABLE 0*
11 Ground 12 DRIVE SELECT 1*
13 Ground 14 DRIVE SELECT 0*
15 Ground 16 MOTOR ENABLE 1*
17 Ground 18 DIRECTION*
19 Ground 20 STEP*
21 Ground 22 WRITE DATA*
23 Ground 24 WRITE GATE*
25 Ground 26 TRAK00*
27 Ground 28 WRITE PROTECT*
29 Ground 30 READ DATA*
31 Ground 32 SIDE 1 SELECT*
33 Ground 34 DISK CHANGG*
CN9: Printer Connector
Pin Define Pin Define
1 STROBE 14 AFD#
2 PD0 15 ERR#
3 PD1 16 INIT#
4 PD2 17 SLIN#
5 PD3 18 Ground
6 PD4 19 Ground
7 PD5 20 Ground
8 PD6 21 Ground
9 PD7 22 Ground
10 ACK# 23 Ground
11 BUSY 24 Ground
12 PE 25 Ground
13 SLCT 26 NC

User’s manual
AW-F703
12
CN10:USB Connector
Pin Define Pin Define
1 VCC 2 VCC
3 D0- 4 D1-
5 D0+ 6 D1+
7 Ground 8 Ground
9 NC 10 Ground
CN11: COM2 Connector
Pin Define Pin Define
1 DCD1 2 DSR1
3 RXDD1 4 RTS1
5 TXDD1 6 CTS1
7 DTR1 8 RI
9 Ground 10 NC
11 422/485TX+ 12 422/485TX-
13 422RXD+ 14 422RXD-
CN12: DVI Connector
Pin Define Pin Define
1 GND 2 GND

User’s manual
AW-F703
13
3 TX2N 4 TX0N
5 TX2P 6 TX0P
7 GND 8 GND
9 CLK 10 TXCN
11 DATA 12 TXCP
13 GND 14 GND
15 TX1N 16 CHARGE
17 TX1P 18 +5V
19 GND 20 +5V
CN13: IR Connector
Pin Define
1 5V
2 NC
3 IRRX
4 Ground
5 IRTX
CN14: COM1 D-Sub Connector
Pin Define
1 DCD
2 RXD
3 TXD
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
9 R1
CN15: Internal Keyboard Connector

User’s manual
AW-F703
14
Pin Define
1 KB-CLK
2 KB-DATA
3 NC
4 Ground
5 +5V
CN16: Keyboard/Mouse Connector
Pin Define
1 KB-DATA
2 MS-DATA
3 Ground
4 +5V
5 KB-CLK
6 MS-CLK
CN17: VGAD-Sub Connector
Pin Define
1 RED

User’s manual
AW-F703
15
2 GREEN
3 BLUE
4 MONID0
5 Ground
6 Ground
7 Ground
8 Ground
9 +5V
10 Ground
11 MONID1
12 DDC DATA
13 HSYNC
14 VSYNC
15 DDC CLOCK
CN18:AC-97Connector
Pin Signal Pin Signal
1 +12V 2 GND
3 GND 4 AC97-BTCLK
5 +3.3V 6 KEY PIN
7 AC97-SDIN0 8 AC97-SYNC
9 GND 10 AC97-RESET
11 AC97-SDOUT 12 PC-BEEP
NOTE: Some AC97 connector with housing that
connector pin 6 is N/C.
CN19: LAN1 Connectors

User’s manual
AW-F703
16
Pin Define
1 MDI0+
2 MDI0-
3 MDI1+
4 MDI2+
5 MDI2-
6 MDI1-
7 MDI3+
8 MDI3-
9 LINK100_N
10 LINK1000_N
11 LINK_UP_N
12 ACTIVITY_N
LED:
Bi-Color Speed LED
10 Mbps Off
100 Mbps Green
1000 Mbps Yellow
Link/Activity LED
Link Green
Activity Blink
CN20, CN21: FAN Connector
Pin Define
1 Ground
2 +12V
3 Speed Detect

User’s manual
AW-F703
17
JP1: RS232/422/485 Select
Setting Define
1-2 RS-232
(Default)
3-4 RS-422
5-6 RS-485
JP2:ResetSelect
Setting Define
1-2 IRQ11
2-3 Reset Switch
(Default)
JP3: CMOS Setting
Setting Define
1-2 Normal
2-3 Clear CMOS