AFi RT-980C-SL User manual

11/30/2012 JPK
Instruction Manual
RT-980C-SL
Eight Channel Video Transmitter

2
INSTALLATION AND OPERATION INSTRUCTIONS
INTRODUCTION
Thank you for purchasing your American Fibertek RT-980C-SL singlemode eight channel video
transmitter. Please take a few minutes to read these installation instructions in order to obtain
the maximum performance from this product.
FUNCTIONAL DESCRIPTION
The RT-980C-SL operates as half of a transmitter / receiver pair for the transmission of eight
channels of high performance digital NTSC, PAL, RS170, or RS343 video signals. The RT-
980C-SL is designed to operate with the MR or RR-980C-SL video receiver over one
singlemode fiber optic cable. Refer to the data sheets for detailed performance specifications.
INSTALLATION
THE INSTALLATION OF THIS UNIT SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON(S) AND MUST CONFORM TO ALL LOCAL CODES.
POWER SOURCE
Power to the unit is supplied by the sub-rack. Please refer to the SR-20/2 and PSR-2
instructions for further details.
POWER CONNECTION
Power is supplied to the unit via four finger backplane connectors. The RR-980C-SL can be
inserted into the sub-rack or removed from the sub-rack with power applied to the backplane.

3
FIBER CONNECTION
The fiber optic connection is made via a ST/PC connector located on the right side of the unit.
Be sure to allow sufficient room for the required minimum bend radius of the fiber cable used.
VIDEO INPUT CONNECTIONS
The video input connections are made via BNC connectors on the right side of the unit. The
video input should be connected to an appropriate 75baseband video source such as a
camera or a video recorder output. For optimum performance the video cables should be the
shortest length of coax practical
RT-980C-SL STATUS INDICATORS
The RT-980C-SL transmitter provides the LED status indicators to aid in installation and
troubleshooting:
VIDEO 1 THROUGH VIDEO 8
A bi-color LED indicator is provided for each of the eight video inputs of the RT-980C-SL.
DC power and video status associated with each of these LED’s are summarized below.
Video Presence LED DC Power Status Video Status
Green On Proper Input Video Present
Red On Input Video Not Detected
Off Off Check Power Supply

4
LIFETIME WARRANTY INFORMATION
American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of
defects in materials and workmanship. Defective products will be repaired or replaced at the
exclusive option of American Fibertek. A Return Material Authorization (RMA) number is
required to send the products back in case of return. All returns must be shipped prepaid. This
warranty is void if the products have been tampered with. This warranty shall be construed in
accordance with New Jersey law and the courts of New Jersey shall have exclusive jurisdiction
over this contract. EXCEPT FOR THE FOREGOING WARRANTY, THERE IS NO WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE,
EXPRESSED OR IMPLIED, WHICH EXTENDS BEYOND THE WARRANTY SET FORTH IN
THIS AGREEMENT. In any event, American Fibertek will not be responsible or liable for
contingent, consequential, or incidental damages. No agreement or understanding, expressed
or implied, except as set forth in this warranty, will be binding upon American Fibertek unless in
writing, signed by a duly authorized officer of American Fibertek.
SERVICE INFORMATION
There are no user serviceable parts inside the unit.
In the event that service is required to this unit, please direct all inquiries to:
American Fibertek, Inc. Phone: [phone]
120 Belmont Drive Phone: [phone]
Somerset, NJ 08873 FAX [phone]
E-mail: [email protected]