AFL Hyperscale U Series User manual

0RU Housing
Series
Installation Guide

2© AFL Hyperscale. All rights reserved Series
Safety Precautions
Laser Precautions
Warning: The laser light used to transmit information over optical ber cables can cause severe eye
damage. Because this light is invisible, it will not cause the iris of the eye to contract involuntarily as when
viewing a bright visible light, and no pain is felt as the retina is burned.
Never look into the end of a ber or connector which may have a laser coupled to it. Should accidental
eye exposure to laser light be suspected, arrange for an eye examination immediately.
General Precautions
Personnel must be thoroughly familiarized with all applicable Occupational Health and Safety (OH&S)
regulations, local regulations, and your company safety practices and policies.
Warning: To reduce the chance of accidental injury:
Before work begins, all personnel must be thoroughly familiar with the operation of all equipment
and procedures to be used during the installation.
Before use, all equipment, especially safety gear, must be inspected and tested for proper operation.
Replace and repair as necessary.
U-Series 0RU Housing
Before installing or adjusting this product, please read these instructions carefully.
Please keep this guide for future reference.

3
U-Series 0RU Housing
© AFL Hyperscale. All rights reserved
Series
Component Overview
A
B
A. 0RU Mounting Plate
B. Mounting Block

4© AFL Hyperscale. All rights reserved Series
In the Box
Item Item Qty
A 0RU Mounting Plate 1
BMounting Block 1
C6mm M4
Countersunk Screw 4
D8mm M3
Countersunk Screw 4
(B) Mounting Block
(C) 6mm M4
Countersunk Screw
(A) 0RU Mounting Plate
(D) 8mm M3
Countersunk Screw
1 x U-Series Cassette
What You Will Need
Cross-Head
Screwdriver

5
U-Series 0RU Housing
© AFL Hyperscale. All rights reserved
Series
Example Congurations
Single Block 3*
Single Block 2Single Block 1
Below are the different cassette congurations achievable with the U-Series 0RU Housing. Once a suitable position for the installation has
been chosen, screw the mounting plate to the mounting block, and then to the surface.
1. 2.
3.

6© AFL Hyperscale. All rights reserved Series
Example Congurations
Triple Block*
Dual Block 2*Dual Block 1*
*Conguration would require multiple kits
4.
6.
5.

7
U-Series 0RU Housing
© AFL Hyperscale. All rights reserved
Series
Using the Cassette
Cassettes can be locked and unlocked using the latch shown above.
Cassettes can be installed or removed from the front or the rear of the housing with no tools required.
7.
8.

Thank you for choosing AFL Hyperscale
AFLHSUSERIES0RUH251022
www.aflhyperscale.com
AFL Hyperscale reserves the right to make changes to this Installation Guide at any time without notice