Ag Leader Generic RCM 4004426 User manual

Generic Row Unit
Row Control Module (RCM)
Generic Installation Instructions
PN: 2006476-ENG REV. A

Installation Instructions
2006476-ENG Rev A © 2016 Ag Leader Technology, Inc All Rights Reserved
2
Installation Overview
This document defines requirements to install a Row Control Module (Ag Leader
part number 4004426) on an unspecified row unit. User designed custom
brackets may be required.
Required Parts
Part Number
Qty *
Description
4004426
1
ROW CONTROL MODULE (RCM)
4004879
1
HARDWARE KIT –GENERIC
4004886
1
MOUNTING BRACKET –GENERIC
* Quantities listed are per row unit
The Row Control Module installation must meet the following requirements:
Two point minimum mechanical attachment of RCM bracket to row unit
Secure attachment of RCM to the RCM bracket
RCM and bracket do not interfere with motion of row unit
RCM and bracket do not interfere with placement or performance of seed
meter
Cables connected to RCM are not at risk of damage
RCM connectors are positioned to avoid water pooling within the
connector

Installation Instructions
2006476-ENG Rev A © 2016 Ag Leader Technology, Inc All Rights Reserved
3
Installation Procedure
Photos are for reference only, and may not match your row unit set up.
1. Find a section of the row unit that would provide adequate space for RCM and bracket.
2. Securely attach RCM bracket to row unit using provided hardware or other means.
3. Attach RCM to bracket using
provided hardware.
4. Position RCM to avoid water pooling
within the connectors.