AG Neovo DR-17P User manual

DR-17P LCD Display
User Manual

TABLE OF CONTENTS
2
Safety Information............................................................................................................4
FCC Declaimers ....................................................................................................................................... 4
WEEE....................................................................................................................................................... 5
Hg............................................................................................................................................................. 5
Precautions.......................................................................................................................7
Notice ....................................................................................................................................................... 7
Cautions When Setting Up ....................................................................................................................... 7
Cautions When Using............................................................................................................................... 8
Cleaning and Maintenance....................................................................................................................... 8
Symbol Meaning....................................................................................................................................... 8
Notice for the LCD Display ....................................................................................................................... 9
Chapter 1: Product Description ......................................................................................11
1.1 Package Contents .............................................................................................................................. 11
1.2 Wall Mounting Installation Preparation............................................................................................... 12
1.2.2 Removing the Base Stand....................................................................................................... 12
1.2.1 Wall Mounting.......................................................................................................................... 12
1.3 LCD Display Overview ....................................................................................................................... 13
1.3.1 Front View and Keypad Buttons.............................................................................................. 13
1.3.2 Rear View................................................................................................................................ 14
Chapter 2: Making Connections......................................................................................15
2.1 Connecting the Power ........................................................................................................................ 15
2.2 Connecting Input Source Signals ....................................................................................................... 16
2.2.1 Connecting a Computer .......................................................................................................... 16
Using VGA Cables ......................................................................................................................... 16
Using DVI Cables........................................................................................................................... 16
Connecting an Audio Device .......................................................................................................... 17
2.2.2 Connecting a Camera or Video Device................................................................................... 17
Using CVBS Cables ....................................................................................................................... 17
Using S-Video Cables .................................................................................................................... 18
Chapter 3: Using the LCD Display ..................................................................................19
3.1 Turning on the Power ......................................................................................................................... 19
3.2 Selecting the Input Source Signal ...................................................................................................... 19
3.3 Adjusting the Volume.......................................................................................................................... 20
3.4 Locking the OSD Menu ...................................................................................................................... 20
3.5 Using Picture-in-Picture (PIP) ............................................................................................................ 21
3.5.1 PIP Options ............................................................................................................................. 21
3.5.2 PIP Swap................................................................................................................................. 22
3.6 Using ROTATE Function .................................................................................................................... 22
3.7 Using Auto Adjustment Function ........................................................................................................ 23
Chapter 4: On Screen Display Menu...............................................................................24
4.1 Using the OSD Menu ......................................................................................................................... 24
4.2 OSD Menu Tree ................................................................................................................................. 26

3
TABLE OF CONTENTS
Chapter 5: Adjusting the Settings...................................................................................29
5.1 Brightness Setting .............................................................................................................................. 29
5.2 Colour Setting..................................................................................................................................... 30
5.3 Image Setting (VGA only)................................................................................................................... 31
5.4 Image Setting (Video signals) ............................................................................................................ 32
5.5 PIP Setting ......................................................................................................................................... 34
5.6 OSD Setting ....................................................................................................................................... 36
5.7 Audio Setting ...................................................................................................................................... 37
5.8 Other Setting ...................................................................................................................................... 38
5.9 Auto Brightness .................................................................................................................................. 40
5.9.1 EcoSmart Sensor ....................................................................................................................... 40
5.10 Input Select ...................................................................................................................................... 41
Chapter 6: Appendix ........................................................................................................42
6.1 Warning Messages............................................................................................................................. 42
6.2 Troubleshooting.................................................................................................................................. 43
6.3 Transporting the LCD Display ............................................................................................................ 44
Chapter 7: Specications ................................................................................................45
7.1 Display Specications ........................................................................................................................ 45
7.2 Display Dimensions............................................................................................................................ 46

SAFETY INFORMATION
4
This FCC Class-B compliant digital device
complies with the Interference-Causing
Equipment Regulations of Canada.
FCC Declaimers
This device complies with Section 15 of the FCC listing. The
operation procedures must meet the following conditions: (1)
the device must not cause any damaging interference; and (2)
this device must accept any received interference, including any
unpredictable interference that may possibly occur.
Dear users,
This device has passed the Class B digital service regulations and
complies with Section 15 of the FCC listing; these are intended to
provide reasonable warranty against damaging interference for
home use. This device will produce, use, and emit radio frequency
energy; therefore, installation or use without following the instructions
given may cause damaging interference to radio communication.
Nonetheless, it is not possible to state with certainty that interference
will occur from specic installations. If this device has caused
damaging interference to radio or TV signals (simply turn the device
on and off to check if such interference is caused by the device), we
recommend that you x the interference using the following methods:
Readjust the direction or location of the antenna.•
Increase the distance between this device and the receiver.•
Consult your local dealer or an experienced radio/TV technician.•
Warning:
Making changes or modications to
the device without the permission
from an authorized dealer may void
the warranty of this device.
Safety Information

5
SAFETY INFORMATION
WEEE
Information for users applicable in European Union countries.
The symbol on the product or its packaging signies that this product has to be
disposed separately from ordinary household wastes at its end of life. Please
kindly be aware that this is your responsibility to dispose electronic equipment at
recycling centers so as to help conserve natural resources. Each country in the
European Union should have its collection centers for electrical and electronic
equipment recycling. For information about your recycling drop off area, please
contact your local related electrical and electronic equipment waste management
authority or the retailer where you bought the product.
Hg
Lamp Disposal
LAMP(S) inside this product contain mercury and must be recycled or disposed of
according to local, state, or federal laws. For more information, contact the electronic
industries alliance at www.eiae.org for lamp specic disposal information check
www.lamprecycle.org.
Vermont Hg directive
Title 10: Conservation and Development
Chapter 164: COMPREHENSIVE MERCURY MANAGEMENT
§ 7106. Labeling of mercury-aided products
Contains Mercury, Dispose of Properly
Standard Test item Standard
EN60601-1-2:2007
RAD & CON EN55011(EMI)
Harmonic EN61000-3-2
Flicker EN61000-3-3
ESD IEC 61000-4-2: 2008
RS IEC 61000-4-3: 2006+A1:2007+A2:2010
EFT IEC 61000-4-4: 2012
Surge IEC 61000-4-5: 2005
CS IEC 61000-4-6: 2008
PFM IEC 61000-4-8: 2009
DIP IEC 61000-4-11: 2004

6
SAFETY INFORMATION
Guidance and manufacturer’s declaration – electromagnetic emissions
The model DR-17P is intended for use in the electromagnetic environment specied below. The customer or
the user of the model DR-17P should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
The model DR-17P uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
The model DR-17P is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Voltage uctuations/
icker emissions
IEC 61000-3-3
Recommended separation distances between
portable and mobile RF communications equipment and the model DR-17P
The model DR-17P is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the model DR-17P can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the model DR-17P as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d= 1,2
80 MHz to 800 MHz
d= 1,2
800 MHz to 2,5 GHz
d= 2,3
0,01 0,12 0,12 0,23
0,1 0,38 0,38 0,73
1 1,2 1,2 2,3
10 3,8 3,8 7,3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reection from structures, objects and people.

7
PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Symbols used in this manual
This icon indicates the existence of a potential hazard that could result in personal injury
or damage to the product.
This icon indicates important operating and servicing information.
Notice
Read this User Manual carefully before using the LCD display and keep it for future reference.•
The product specications and other information provided in this User Manual are for reference only. All •
information is subject to change without notice. Updated content can be downloaded from our web site at
http://www.agneovo.com.
To register online, go to• http://www.agneovo.com.
To protect your rights as a consumer, do not remove any stickers from the LCD display. Doing so may•
affect the determination of the warranty period.
ISO 7000-1641 Operating instructions
Cautions When Setting Up
Do not place the LCD display near heat sources, such as a heater, exhaust vent, or in direct
sunlight.
Do not cover or block the ventilation holes in the housing.
Place the LCD display on a stable area. Do not place the LCD display where it may subject
to vibration or shock.
Place the LCD display in a well-ventilated area.
Do not place the LCD display outdoors.
Do not place the LCD display in a dusty or humid environment.
Do not spill liquid or insert sharp objects into the LCD display through the ventilation holes.
Doing so may cause accidental re, electric shock or damage the LCD display.
Precautions

8
PRECAUTIONS
Cautions When Using
Use only the power cord supplied with the LCD
display.
The power outlet should be installed near the LCD
display and be easily accessible.
If an extension cord is used with the LCD display,
ensure that the total current consumption plugged
into the power outlet does not exceed the ampere
rating.
Do not allow anything to rest on the power cord. Do
not place the LCD display where the power cord
may be stepped on.
If the LCD display will not be used for an indenite
period of time, unplug the power cord from the
power outlet.
To disconnect the power cord, grasp and pull by the
plug head. Do not tug on the cord; doing so may
cause re or electric shock.
Do not unplug or touch the power cord with wet
hands.
Cleaning and Maintenance
The LCD display comes with NeoVTM Optical Glass.
Use a soft cloth to clean the glass surface and the
housing.
The display can be cleaned using a cloth moistened
with 95% ethyl alcohol.
Do not rub or tap the surface of the glass with sharp
or abrasive items such as a pen or screwdriver. This
may result in scratching the surface of the glass.
Do not attempt to service the LCD display yourself,
refer to qualied service personnel. Opening or
removing the covers may expose you to dangerous
voltage or other risks.
Warning:
Unplug the power cord
from the power outlet and
refer to qualied service
personnel under the following
conditions:
When the power cord is♦
damaged.
If the LCD display has been♦
dropped or the housing has
been damaged.
If the LCD display emits smoke♦
or a distinct odor.
Warning:
Ceiling mount or mount
on any other horizontal
surface overhead are not
advisable.
Installation in contravention of
the instructions may result in
undesirable consequences,
particularly hurting people and
damaging property. Users who
have already mounted the
display on the ceiling or any
other horizontal surface overhead
are strongly advised to contact
AG Neovo for consultations and
solutions to help ensure a most
pleasurable and fullling display
experience.
Symbol Meaning
IEC 60417-5031 Direct current
IEC 60417-5009 STAND-BY

9
PRECAUTIONS
Notice for the LCD Display
In order to maintain the stable luminous performance, it is recommended to use low brightness setting.
Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease
with time.
When static images are displayed for long periods of time, the image may cause an imprint on the LCD
display. This is called image retention or burn-in.
To prevent image retention, do any of the following:
Set the LCD display to turn off after a few minutes of being idle.•
Use a screen saver that has moving graphics or a blank white image.•
Switch desktop backgrounds regularly.•
Adjust the LCD display to low brightness settings.•
Turn off the LCD display when the system is not in use.•
Things to do when the LCD display shows image retention:
Turn off the LCD display for extended periods of time. It can be several hours or several days.•
Use a screen saver and run it for extended periods of time.•
Use a black and white image and run it for extended periods of time.•
When the LCD display is moved from one room to another or there is a sudden change from low to high
ambient temperature, dew condensation may form on or inside the glass surface. When this happens, do
not turn on the LCD display until the dew disappears.
Due to humid weather conditions, it is normal for mist to form inside the glass surface of the LCD display.
The mist will disappear after a few days or as soon as the weather stabilizes.
There are millions of micro transistors inside the LCD display. It is normal for a few transistors to be
damaged and to produce spots. This is acceptable and is not considered a failure.
The intended use of the DR-17P is to serve as a LCD monitor for integration with the hospital system. It is
designed for general purpose for hospital environment. For displaying and viewing of images for reference.
The use of this device does not require any direct contact with patients.
Accessory equipment connected to the analog and digital interfaces must be in compliance with the
respective nationally harmonized IEC standards (i.e. IEC 60950 for data processing equipment, IEC 60065
for video equipment, IEC 61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore all congurations shall comply with the system standard IEC 60601-1-1. Everybody who
connects additional equipment to the signal input part or signal output part congures a medical system,
and is therefore, responsible that the system complies with the requirements of the system standard
IEC 60601-1-1. The unit is for exclusive interconnection with IEC 60601-1 certied equipment in the patient
environment and IEC 60XXX certied equipment outside of the patient environment. If in doubt, consult the
technical services department or your local representative.
Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle
marked “Hospital Only” or “Hospital Grade”.

10
PRECAUTIONS
Notice for the LCD Display
Use a power cord that matches the voltage of the power outlet, which has been approved and complies
with the safety standard of your particular country.
WARNING – Do not modify this equipment without authorization of the manufacturer.
WARNING – To avoid risk of electric shock, this equipment must only be connected to a supply mains with
protective earth.
CAUTION: This adapter Manufacturer/model is a forming part of the medical device.
Adapter manufacturer/model: ADAPTER TECH / ATM065-P240.♦
Input/output: 100-240V~50-60Hz 1.6-0.7A / 24V(♦) 2.71A.
WARNING: Use suitable mounting apparatus to avoid risk of injury.
CAUTION: Make sure the user not to contact SIP/SOPs and the patient at the same time.

11
CHAPTER 1: PRODUCT DESCRIPTION
1.1 Package Contents
When unpacking, check if the following items are included in
the package. If any of them is missing or damaged, contact your
dealer.
User manual
Power cord
Note:
The pictures are for reference♦
only. Actual items may vary upon
shipment.
Power adapter
VGA cable
Warranty card
LCD Display
Audio cable
Chapter 1: Product Description

12
PRODUCT DESCRIPTION
1.2 Wall Mounting Installation Preparation
1.2.1 Wall Mounting
1Remove the base stand.
See procedures below.
2Wall mount the LCD display.
Screw the mounting bracket to the VESA holes at
the rear of the LCD display.
1.2.2 Removing the Base Stand
1 Lay the LCD display
face down on a at
even surface.
2 Remove the six
screws securing the
base stand from the
LCD display.
3 Detach the base
stand.
100 mm
75 mm
100
mm
75
mm
Note:
Take measures to prevent the
LCD display from falling down
and lessen possible injury and
damage to the display in case of
earthquakes or other disasters.
Use only the 75 x 75 mm and ♦
100 x 100 mm wall mount kit
recommended by AG Neovo.
Secure the LCD display on a♦
solid wall strong enough to bear
its weight.
Note:
To protect the glass panel, place a
towel or soft cloth before laying the
LCD display down.

13
PRODUCT DESCRIPTION
1.3 LCD Display Overview
1.3.1 Front View and Keypad Buttons
Display screen
The LCD display screen is protected by
NeoVTM Optical Glass.
Green - Power on
Amber - Standby mode
Off - Power off
SOURCE
Press repeatedly to select the input signal•
source.
UP
Press repeatedly to select PIP option.•
During OSD menu selection, press to move•
up a menu or submenu.
MENU
Press to display the OSD menu.•
Press again to hide the OSD menu.•
DOWN
Press to swap the PIP main and sub•
picture.
When PIP is off, press to rotate the image•
180°.
During OSD menu selection, press to move•
up a menu or submenu.
LEFT
Press to decrease the volume.•
During OSD menu selection, press to adjust the•
settings.
RIGHT
Press to increase the volume.•
During OSD menu selection, press to select an•
option and adjust the settings.
AUTO
For VGA input signal source, press to perform•
auto adjustment.
During OSD menu selection, press to close the•
OSD menu or exit a submenu.
POWER / LED indicator
Press to turn the power on or off.•
1
Keypad
1
7
6
5
4
3
2
8
9
6
4
7
5
9
8
2
3
INPUT
SELECT
POWER/
LED
AUTO ADJ.
VOL
UP
VOL
DOWN
SWAP/
ROTATE
PIP
SELECT
MENU
Illuminator Function Hot Key
Press and hold and for 3 seconds to turn the
screen completely white to enable you to see the
light box for the x-ray lm. To change the screen
back to normal display mode, press and hold
and for 3 seconds again.

14
PRODUCT DESCRIPTION
1.3.2 Rear View
DC power input
Use to connect the power cord.
COMPOSITE Video input connector
Use to connect a composite cable for
CVBS input signal.
VGA connector
Use to connect a PC using a VGA cable for
analogue input signal.
S-Video connector
Use to connect AV cables for the
S-Video signal.
Audio port
Use to connect an audio cable for the
PC’s audio input.
DVI connector
Use to connect a PC using DVI cable
for digital input signal.
1
4
3
2
5
7
6
COMPOSITE Audio input connectors
Use to connect RCA cables for CVBS /
S-Video audio signal.
AUDIO INDVI D-SUB
S-VIDEO
L
R
RCA
Video
DC IN
123 4
5
7
6

15
CHAPTER 2: MAKING CONNECTIONS
2.1 Connecting the Power
1Connect the power cord to the power adapter.
2Connect the power adapter to the DC power input at the rear of the LCD display.
3Connect the power cord plug to a power outlet or a power supply.
DC IN
Caution:
Make sure that the LCD display is♦
not connected to the power outlet
before making any connections.
Connecting cables while the power
is ON may cause electric shock or
personal injury.
Caution:
When unplugging the power cord,♦
hold the power cord by the plug
head. Never pull by the cord.
Chapter 2: Making Connections

16
MAKING CONNECTIONS
2.2 Connecting Input Source Signals
2.2.1 Connecting a Computer
Using VGA Cables
Connect one end of a D-sub cable to the VGA connector of the LCD display and the other end to the D-sub
connector of the computer.
D-SUB
Using DVI Cables
Connect one end of a DVI cable to the DVI connector of the LCD display and the other end to the DVI
connector of the computer.
DVI

17
MAKING CONNECTIONS
Connecting an Audio Device
Connect one end of an audio cable to the audio port at the rear of the LCD display and the other end to the
audio out port of the computer.
AUDIO IN
2.2.2 Connecting a Camera or Video Device
L
R
RCA
Video
or
Using CVBS Cables
Connect one end of a CVBS cable
to the COMPOSITE connector of the
LCD display and the other end to
the COMPOSITE connector of your
device.
For audio input, connect the RCA
cables to the audio in connectors of
the LCD display and the audio out
connectors of your device.

18
MAKING CONNECTIONS
S-VIDEO
or
Using S-Video Cables
Connect one end of an S-Video
cable to the S-VIDEO connector of
the LCD display and the other end
to the S-VIDEO connector of your
device.
For audio input, connect an RCA
cable to the audio in connector of
the LCD display and the audio out
connector of your device.

19
CHAPTER 3: USING THE LCD DISPLAY
3.1 Turning on the Power
POWER button /
LED indicator
1Plug the power cord to a power outlet
or power supply.
2Touch the POWER button to turn the
LCD display on.
The LED indicator turns GREEN.
When the LCD display is turned on,
touch the POWER button to turn off the
LCD display.
The LED indicator turns off.
Note:
The LCD display still consumes♦
power as long as the power
cord is connected to the power
outlet. Disconnect the power
cord to completely cut off
power.
3.2 Selecting the Input Source Signal
SOURCE button
Notes:
After selecting an input source♦
signal, the input source signal
message appears on the
screen briey.
For example, CVBS is selected
the following message is
displayed.
CVBS
INPUT
If the selected input source♦
signal is not connected to the
LCD display or is turned off, the
no signal message is displayed
on the screen.
NO
SIGNAL
If the resolution or the graphics♦
card of the connected computer
is set too high, the input out of
range message is displayed.
INPUT SIGNAL
OUT OF RANGE
1Touch the button to select the input
source signal.
Chapter 3: Using the LCD Display

20
USING THE LCD DISPLAY
3.3 Adjusting the Volume
1Touch either the or buttons to call out the volume bar.
2Touch the button to increase volume.
Touch the button to decrease volume.
To mute the audio, set the volume to 0.
VOLUME buttons
3.4 Locking the OSD Menu
Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the
keypad.
To lock the OSD, press and hold the keypad buttons listed below for at least 5 seconds or until the
OSD
LOCK OUT
message appears.
When the OSD is locked, all keypad buttons are inactivated.
Type of OSD Lock Lock Operation Unlock Operation
Lock all buttons Touch and hold the , , and the
buttons for 5 seconds.
Touch and hold the , , and the
buttons for 5 seconds or until the OSD
menu appears.
Lock all buttons except
the POWER button.
Touch and hold the , , and the
buttons for 5 seconds.
Touch and hold the , , and the
buttons for 5 seconds or until the OSD
menu appears.