setting the time and date on
your meter
After you have paired your meter and supported
device, the time and date on the meter will be set
for the first time.
The time and date settings on the meter are config-
ured to match the supported device’s time and date
settings.
IMPORTANT: Any test results taken prior to
the time and date being set will not have a
time and date associated with them on the
meter, and will not sync to the App.
Every time your meter and supported device syncs,
the date and time will be updated to match the date
and time on your supported device.
After the time and date is
set and you perform a test,
the unit of measure, date,
and time will scroll to the
right of the test result.