Agit WaveStorm V1 SUP User manual

USER
MANUAL
AGIT GLOBAL, INC.
[e-mail]
www.agit-global.com
No.446, Sec. 1, Fuding Rd., Caotun Township, Nantou County 54244,
Taiwan (R.O.C.)

USER
MANUAL
2
Thank You for purchasing a ‘Wavestorm’
Stand-Up Paddle Board (SUP) and we hope
you have fun using your new purchase as
much as we’ve enjoyed developing and
testing this SUP.
Stand-Up Paddle Boarding, or in Hawaiian
language, Hoe he’e nalu, is an emerging
global sport with a Hawaiian heritage. The
sport is an ancient form of surfing that
began as a method for surfing instructors
to manage large groups of learner surfers.
Standing on the board gave instructors a
higher viewpoint, increasing visibility of
what was going on around them - such
as an incoming swell or wave. In the early
1960s, The Beach Boys of Waikiki would
stand on their long boards and paddle out
with outrigger paddles to take pictures of
tourists learning to surf. This is where the
term “Beach Boy Surfing”, another name
for Stand-Up Paddle Surfing, originates.
The sport provides an excellent Core
Workout because it requires good core
strength to balance and paddle on the
board while standing on an unstable water
surface. SUP’ing can be done on oceans,
lakes, and rivers. It is gaining in popularity
as celebrities are practicing the sport, and
cross-over athletes are training with SUP’s.
Many surfers have converted to SUP’ing
because of the versatility of this new sport;
it can be done on days when there is surf
(waves) or when there are no waves at all.
AGIT Global’s 9 foot 6 inch Wavestorm
SUP is designed for beginners to advanced
SUP’ers alike. Our board dimensions
provide good stability on water. The
foam construction of the board, with its
3 Stringer design is very strong yet light-
weight and is easy to transport. There is
a Built-In Handle near the center of the
topdeck to help carry the board. There is a
Fin in the stern for added stability.
The Wavestorm SUP also features our
patented ‘Water Barrier Skin’ technology,
a thin graphic film layer covering the
board’s topdeck, giving protection from
minor scratches, dents and abrasions. It
helps keep the SUP looking clean and fresh.
The Wavestorm Paddle can easily be
adjusted to accommodate the desired
height of most riders. Typically, a rider
needs a Paddle extending from the bottom
of their feet to 6-12 inches above their head.
Please read through the instruction manual
to properly install the Fins and Leash. We
hope you enjoy your new Wavestorm SUP
but remember... Always Carefully Examine
Water Conditions in your area, making
sure it is clear of Rocks, Reefs, Boats and
other Inherent Water Hazards. We highly
recommend wearing only approved US
Coast Guard Personal Flotation Devices
(PFD) while SUP’ing. SUP’ing can be safer
and loads fun when practicing with a buddy.
ALOHA from the Wavestorm team!

USER
MANUAL 3
INDEX
05
PAGE
06
PAGE
08
PAGE
10
PAGE
04
PAGE
Board Care Information
Fin Installation
Leash Installation
Paddle Sizing
Contents
2
3
4
5
1

USER
MANUAL
4
FIN x1
LEG LEASH x1
CONTENTS
1
1
2

USER
MANUAL 5
We strongly suggest removing the fin when
transporting the board to prevent damage. Always
screw the screw tightly back into the metal plate on
the fin box to prevent the plate from falling out.
Rinse your board with fresh water aer every use to
remove dirt, sand, and salt residue. Pull apart paddle
sha pieces aer each use and rinse with fresh water.
Let dry and leave apart until next use.
Store your board away from direct sunlight, in a cool,
dry location.
If your board has a hole or scratch in the foam
surface, you can purchase any “Non-Solvent” based
glue to repair it. Spread the glue inside the hole or
scratch and let dry before using. We recommend
using Gorilla Glue or 3M 5200 marine sealant which
can be purchased at most hardware or drug stores.
You can also use any “Non Solvent” based glue to
repair side rail seams (where the slick bottom and
foam surface join together). Spread the glue in seam
and let dry before using the board.
The boards may be slippery when they are new, if so you
can always rub some wet sand on the deck of the board.
Fins, Leashes, Paddles are available for purchase.
Please call 1-877-673-3622 for more information or
visit www.agit-global.com
BOARD CARE INFORMATION
RECOMMENDED uSER wEIGhT LIMIT NOT TO EXCEED 300LBS.
1
2
3
4
5
6
7
2

USER
MANUAL
6
Insert Fin into fin box by inserting
brass pin of Fin into the opening of fin
box, as shown above.
First remove the protective tape, then
remove the screw from the metal
plate.
Fin Fin
Insert the screw into the fin.
Screw
Fin
Screw
Metal Plate
1
33.1
2
FIN INSTALLATION
3
We strongly suggest removing the fin when transporting the board to prevent
damage. Always screw the screw tightly back into the metal plate on the fin box
to prevent the plate from falling out.

USER
MANUAL 7
DO NOT uSE EXCESSIVE FORCE WHEN TIGHTENING SCREWS.
Slide Fin backwards into position, as
shown above.
Push Fin down, as shown above.
Fin
Fin
Fin
Attach Fin to metal plate with screw,
as shown above. Then tighten screw.
Do not over tighten.
When putting the fin in for flat water
use, you can put the fin forward. If
using it in the surf, put the fin further
back in the fin box.
Screw
Metal Plate
45
76
CAuTION

USER
MANUAL
8
Pull Leg Leash Rope through eyelet as shown
above and below.
LEASh INSTALLATION
4
1
1.1

USER
MANUAL 9
Pull leg cu through Leg Leash Rope as
shown above.
Pull Leg Leash Rope tight. Installation complete.
2
3

USER
MANUAL
10
6”-12”
Determine desired Paddle length. Most riders
prefer Paddle length to be 6-12 inches taller
than the top of their head.
Pull forward the tab on the adjusting mechanism
to free the Locking Pin.
Pull Paddle Handle upward to extend sha
length to desired height.
PADDLE SIZING
5
1
2
3

USER
MANUAL 11
Push tab so that Locking Pin securely fits into
hole.
There will be a clicking sound when Locking Pin
is securely fitted into desired hole.
Paddle length can be readjusted by following
same procedure.
Click!
4
5
6
Pull apart paddle sha pieces aer each use and rinse with fresh water. Let dry
and leave apart until next use.

CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS 1-877-673-3622
AGIT GLOBAL, INC. www.agit-global.com [e-mail]
No.446, Sec. 1, Fuding Rd., Caotun Township, Nantou County 54244, Taiwan (R.O.C.)