
2 3
5. Make sure again both magnets attach to each other symmetrically.
6. Press the peeled side of the double-sided adhesive tape on the mesh’s margin. Peel off the paper
on the other side of the sticker and press the sticker on the door frame. Repeat this step on all
margins of the mesh.
CLEAN AND STORAGE:
Do not use any scouring or abrasive cleaners while cleaning the product.
Wipe off the mosaic net with a damp, lukewarm cloth. For stubborn dirt you may use a small
amount of soap while cleaning with the cloth. Allow the mosaic net to dry.
Store the product in a dry place at approx 20 degrees that is not exposed to direct sunlight.
TECHNICAL DATA:
Product: Magnetic Door Mesh
Size: 90CM (W) × 210 CM ( L)
IMPORTØR:
Agk Nordic A/S
www.agknordic.com
Copyright 2015. Alle rettigheder forbeholdes.
Trykt og udgivet af Agk Nordic A/S. 09.02.2015
AGK Nordic A/S
Randersvej 88B
Stevnstrup
8870 Langaa
Denmark
Thank you for choosing this product, which we hope you will enjoy.
Please Keep this instruction manual as it contains important information for future reference.
PRODUCT CONTENTS:
1, Magnetic Door Mesh
2, Short Curtain
3, Stickers
4, Thumbtacks
ASSEMBLY:
1. Ensure both magnets attach to each other symmetrically.
2. Fully extend the mesh and press the mesh onto the upper part of the door frame.
3. Press the thumbtacks through top side and two-edge side of door mesh into the doorframe.
For plastic frames, please use the double-sided adhesive tape only.
For wooden frames, you can also use the thumbtacks.
Please note that the thumbtacks will leave little punctures behind.
For aluminum frames use double-sided adhesive tape every 30cm along all the door frame.
4. Press thumbtacks through the two upper corners of the decorative short curtain.