Allied Moulded Products SLIDERBOX SBFB-1N User manual

Allied Moulded is expanding its line of floor box
assemblies to include the new SLIDERBOX®floor box
with flip lid covers. The new boxes are designed with
Allied Moulded’s patented SLIDERBOX®feature, and can
be adjusted and installed in the “up” position to aid in
easier installation of flooring material.
The new floor boxes are available in 3 cover finishes;
brass, dark bronze, and nickel. The boxes are sold as a
complete assembly kit and ready for installation.
SLIDERBOX®Floor Box
www.alliedmoulded.com
CONTACT INFORMATION
Allied Moulded Products, Inc.
222 North Union Street
Bryan, OH 43506 USA
Phone: [phone]
Fax: [phone]
Email: [email protected]
Adjustable single gang floor box solution
FEATURES & BENEFITS
• Designed for use in raised wood floor construction
and mutliple floor substrate materials. This allows
for quick and easy floor installation.
• No need to remove or relocate mounting screws to
reposition the box. Simply loosen the screws and
slide the box up or down.
• Three cover options; brass, dark bronze, or nickel
• Flip lid cover seals water tight and allows assembly
to meet UL 514C scrub-water exclusion test
• Decorator type Tamper Resistant (TR) receptacle; 15
amp 125 volt with ground (NEMA config. 5-15R)
• Provisions for cable entry through molded-in
Speed Klamps™ or 1/2"bottom knockouts
• Substrate thickness of 1-9/16" when utilizing
positioning tabs. *Max floor substrate of 2"
Convenient flip-lid design available in
three cover finish options, along with
a decorator style device.
*Additional (max) substrate thickness
is achieved when the slider plate is
down and the box is installed at its
highest position on the floor joist.
Patented slider plate holds screws in
ready position, allowing for easy
one-person installation.
Scan QR code to learn
more about our new
oor box products!
U.S. Patents
#7,855,338 – #6,365,831

Cover
Gasket
Device
Slider Plate
Box
Order Today! Phone: [phone] Fax: [phone] Email: [email protected]
2
34
*Find and install floor box on
solid floor joist; mount with
slider plate in the “up” position
Move floor box in highest
position by loosening slider plate
screws, install sub floor around
raised box
Install desired floor material
around the raised floor box.
The raised box allows for easier
installation by contractors
Adjust box height to achieve a
flush position; wire the included
device and install the gasket
and cover
* Additional floor box assemblies available. Visit our website at www.alliedmoulded.com for more information!
Replacement cover options include SBFB-1CVR (Brass), SBFB-1NCVR (Nickel), and SBFB-1DBCVR(Dark Bronze)
Quick & Simple Installation
Cu. In
Volume
Catalog
Number Cover Finish Cover Type Device LV Provision
UPC#
85339
Std. Pkg.
Qty.
Std. Wt.
(lb.)
24.0 SBFB-1 Brass Flip Lid Decorator No 97528 6 8
24.0 SBFB-1N Nickel Flip Lid Decorator No 97529 6 8
24.0 SBFB-1DB Dark Bronze Flip Lid Decorator No 97530 6 8
SLIDERBOX®Floor Box Options
SBFB-1 SBFB-1N SBFB-1DB
NEW!
SBFB-1CVR
SLIDERBOX®Floor Box Bulletin 09/2017© 2017 Allied Moulded Products, Inc.
1
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.