Ahlborn ALMEMO 710 User manual

www.ahlborn.com
Quick start guide
ALMEMO® 710
22.31 °C Measured value
50.7 %H Limit value overshot red
35.9 %H Limit value undershot blue
10000 g/kg
OVERRANGE
Outside of measuring range
----- ---
BREAK
Sensor breakage
----- ---
U-LOW
Sensor voltage too low
----- --- Red triangle -
further menus available
------- %H Parameters can be -
but are not yet - programmed
45,0 %H Parameters can be -
and are already - programmed
Units Blue triangle -
help text available
Measured value smoothed
REL Relative to reference value
Measured value corrected
or scaled
MAveraging in progress
DHLMAOutput function
Diff, Hi, Lo, M(t), alarm
CT CT Temperature compensation
fixed, measured
CP CP Atm. pressure compensation
fixed, measured
Rechargeable battery status
full / almost empty / being charged
Memory status empty / almost full
ON-OFF Press and hold down
the ON / OFF switch
HOTKEY Call up desired menu;
Press and hold down: save menu
HOME Call up home menu
Start Start the meas. operation; pro-
gramming is no longer possible
Stop Stop the measuring operation
Manual Manual measuring
Settings Call up local menu
Clear memory Call up a function
Activate a function
ON OFF Switch the function ON / OFF
Select channel Selection box
1/4 Page back / forward
Keyboards
KeysList of parameters
mbar
°C
%rF
m/s
Co
2
g/m
3
g/kg
dt
lux
Pa
mbar
Hz
%H
mbar
°C
%rF
m/s
Co
2
g/m
3
g/kg
dt
lux
Pa
mbar
Hz
%H
mbar
°C
m/s
lux
Pa
%H
mbar
°C
%rF
%rF
m/s
Co
2
g/m
3
g/kg
dt
lux
Pa
mbar
Hz
%H
%H
Ahlborn Mess- und Regelungstechnik GmbH
Eichenfeldstr. 1 • 83607 Holzkirchen • Germany

29.09.13
10:12:03
Sensors Display Logger Settings General
device
settings
Power
supply
Memory
List of
channels
Bar chart Line chart User menu Data logger OutputSensor
overview
Sensor
channels
Measuring
channel
Channel functions
Channel designation
Meas. value smoothing
Max. / min. values
Averaging functions
Meas. value output
Channel locking
Limit values
Actions if limit values
are infringed
Analog output
Scaling values
Correction values
Units
Range
Element flags
Compensation
Channel parameters
Display all values
Channel designation
Meas. value smoothing
Averaging mode
Cycle factor
Minimum sensor voltage
Locking level
Limit values - max/min
Actions if limit
values are infringed
Relays - max/min
Analog - start / end
Base value
Factor
Decimal point shift
Zero point
Gain
Units
Output function
Range
Reference meas. points
Multiplexer
Element flags
Calibration offset
Calibration factor
Sensor
settings
Scales and channels
Channels
Colors
Units
Axis scaling
Left
Right
Time axis
Display options
Grid
Add
Name
Template
Function selection
Channel selection
Edit
Data logger 1
Conversion rate
Scan cycle
Output cycle
Data logger 2
Scan mode
File name
Number
Comments
Data logger 3
Start mode
Stop mode
Data logger 4
Memory total
Memory free
Ring memory
Clear memory
Sensor settings
Channels, Ranges
Sensor configuration
D6, D7
Calibration data
Channel functions
Display settings
Data loggers 1-4
Display settings
Wizards
Data logger
Limit value
Scaling
Two-point adjustment
Averaging functions
Volume flow
Analog output
Blocking function
Function block
Menu block
Channels
Scaling
Output modules
Blocking function
Device settings
Communication
Macros
Operating parameters
Compensation
Calibration data
General device settings
Info Power
supply
Memory
ALMEMO® 710 symbols and menu structure