aidacare Kidz Phoenix Installation instructions
Operation Manual &
Product Specification
KIDZ PHOENIX™
KIDZ SORRENTO™
2. Safety Instructions
4. Technical Specification
6. User Guide and Operating Instructions
14. Working Environment
15. Intellectual Property
16. Maintenance and Servicing
1
CONTENTS
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
1300
133
120
www.aidacare.com.au
All instructions must be read and understood before the product
can be used.
Terminologies
Patient: The person sitting in the chair
User: Competent person with responsibility for the persons sitting in the chair as
well as the suitability of the equipment for the Patient. The User is responsible for
checking the chair for faults during the course of its use.
engaged to prevent risk of injury when being used.
the chair.
the User and Patient. Only a competent person should make adjustments to the
direct at technical@seatingmatters.com
maintenance should only be carried out by fully trained technicians.
to avoid injury.
sitting is recommended at any one time. You must also observe Patient specific
recommendations and guidelines as set by their health professional with regard to
pressure care.
chargers please contact your Seating Matters provider.
chair.
Assembly and installation guide
Seating Matters provider and corrected before the chair is put into use.
avoid it moving during use and to ensure stability.
damage to the chair and objects in its immediate environment.
and their properties can be found on page 16.
ensure there is a 450mm gap at the front and back of the chair to prevent the back
or leg rest coming into contact with a wall or any other object.
32
SAFETY
INSTRUCTIONS
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
1300
133
120
www.aidacare.com.au
54
Chair weight unloaded is 57 Kg/125.6 lb/10.56 Stone.
Chair user weight limit is 159 Kg/364 lb/25 Stone.
Chair weight unloaded is 51 Kg/112.4 lb/8.03 Stone.
Chair user weight limit is 159 Kg/364 lb/25 Stone.
A
B
C
E
F
G
H
Basic dimensions
AOverall height 1160mm/45.5in
BBack height 650mm/26in
CSeat height 540mm/21in
DOverall Length 1020mm/40in
I J
ii
iii iv
Arm height options
ILow 715mm/28in
JHigh 740mm/29in
Footplate height adjustments
EHigh 250mm/10in from seat
FLow 460mm/18in from seat
Available seat and overall widths
G (Seat width) H (Overall width)
250mm/10in 510mm/20in
300mm/12in 550mm/21.5in
350mm/14in 600mm/23.5in
400mm/16in 650mm/25.5in
Available seat and overall widths
G (Seat width) H (Overall width)
250mm/10in 510mm/20in
300mm/12in 550mm/21.5in
350mm/14in 600mm/23.5in
400mm/16in 650mm/25.5in
Recline and tilt angles
ii Back angle recline
90° - 130°
40° range
iii Leg rest angle
90° - 125°
35° range
iv Tilt in space
D
From 5° forward, or anterior, tilt to 30°.
A
B
C
D
E
F
G
H
Basic dimensions
AOverall height 1220mm/48in
BBack height 680-830mm/27-33in
CSeat height 540mm/21in
DOverall Length 1020mm/40in
I J
K
ii
iii iv
Arm height options
ILow 715mm/28in
JHigh 740mm/29in
Footplate height adjustments
EHigh 250mm/10in from seat
FLow 460mm/18in from seat
Recline and tilt angles
ii Back angle recline
90° - 130°
40° range
iii Leg rest angle
90° - 125°
35° range
iv Tilt in space
From 5° forward, or anterior, tilt to 30°.
K
Seat depth
K290-380mm/11-15in
Seat depth
K290-380mm/11-15in
KIDZ PHOENIXTM
TECHNICAL SPECIFICATION
KIDZ SORRENTOTM
TECHNICAL SPECIFICATION
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
1300
133
120
www.aidacare.com.au
Back angle adjustment:
To recline the
the Patient then stand behind the chair
push handle while closing the release
lever (fig.2a). Move the back of the chair
slowly until it is in the required position
and allow the release lever to move to
of the push handles. (fig.2) In powered
options this function is adjusted using the
to Patient or damage to surrounding
according to the buttons on the handset.
(see page 14).
Tilt in space:
must first inform the Patient then stand
firmly hold the push handle while
closing the release lever. (fig.2b) Tilt
the chair to the required position then
let go of the release lever. In powered
(fig.2a)
Tilt in Space (fig.2b)
Tilt in
Space
Shoulder
Support
Spring
Plunger
Seat Belt
Loops
(fig.2)
Braking castors:The chair must be used on a
ensurestabilityandtoavoidthedevicemoving
undesirably
shouldmakeadjustmentsandsetitupaccording
to the User requirements and Patient
dimensions before the Patient sits in the chair. Ensure there is more than one
competent person present when making adjustments to ensure they are correct and
footplate. Please call your Seating Matters provider if you have any questions on
these points. This product should not be lifted at any time unless by competent
persons trained in such manual handling.
Braking Castors
(fig.1)
76
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
1300
133
120
www.aidacare.com.au
to Patient or damage to surrounding environment. Powered adjustment is controlled
via the handset (see page 14).
Seat depth:
carefully pulling the seat out. Tighten the screws again to ensure the seat depth doesn’t
unintentionally change. (fig.3b)
Thumb screws
for seat depth (fig.3)
Seat belt loop
(fig.3a)
loosen the thumb screws behind and in
to avoid tripping hazards or other injuries.
thumb screws are tightened against the
frame of the arm.
Seat width adjustment:
tightened against the frame of the arm.
desired height option on the frame of the chair (fig.3d). Secure the arms in place and
ensure the thumb screws are tightened against the frame of the arm.
(fig.3c)
A350 - 380mm
B330 - 360mm
C310 - 340mm
D290 - 320mm
Seat depth (fig.3b)
There are also four options for seat depth
adjustments should only be made by a
Seating Matters approved provider.
(fig.3d)
98
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
1300
133
120
www.aidacare.com.au
Leg elevation: Before changing
User or Patient must ensure there are
no objects in the immediate environment
that could obstruct the leg rest elevation
or come into contact with the Patient's
legs. Using the manual lever located
rest until it is in the required position
and allow the release lever to move to
use the handset control to move the leg
rest until it is in the required position and
release the button. Ensure that only the
weight of the Patient's legs are placed on
this leg rest. (See page 14 for motorised
elevation instructions).
The foot plate can
be adjusted in height by pulling out the
side and sliding it up and down on the
glide rail. (fig.4a) When the spring
into the nearest hole immediately below
the pins. The foot plate can also be
of the chair.
(fig.4a)
(fig.4b)
(fig.4)
Manual Lever to
elevate leg rest
Elevating
(fig.
4b) To change the angle of the footplate loosen the bolts at each side of the footplate
on the footplate when getting out of the chair.
The leg rest on the chair can be set at a negative angle setting
the bolts.
Chair movement:
Only a competent person should move this chair. Engage the directional lock castor
on the front left of the chair to control the direction of the chair and for ease of
maneuverability.
Seat cushion:
pressure management and comfort. The seat cushion will have non-slip material on
one face and a zip closure on one side.
closure at the rear. This is important as the foam's structure allows good immersion
1110
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
1300
133
120
www.aidacare.com.au
Partially motorised hand control: If your chair is a partially motorised model the Tilt
to operate the desired function.
Leg rest and Back angle recline are controlled by the electric handset.
Simply push the button to operate the desired function.
Back Up
Tilt Up
Tilt Up
of the charger into the charging socket on the side of the handset (fig.5). Charge
during charging.
(fig.5)
Charging Socket
Charger connected to mains
Headrest:
headrest has pressure redistributing padding and will adjust away on both sides. This
handles (fig.2) and carefully move the headrest to the desired position. Lock these
handles in place to ensure this section of the headrest will not move. Check the
two adjustable handles below the shoulder support are locked and secured also.
adjustable handles and carefully move this into the desired position. Lock these
handles in place to ensure this section of the headrest will not move.
Back:
only) is a fundamental aspect of this chair.
seating the Patient. Loosen the adjustable wing knob to the right of the back and
ensure your fingers are clear of any areas of entrapment. (fig.2) You can then pull
out the spring plunger and lift and lower the back to the desired height. The spring
plunger (fig.2) will drop into the closest available hole. Ensure the adjustable wing
the 9 inch adjustment in height from the lowest position. To adjust the angle of the
posterior tilt. Loosen the two adjustable handles (fig.2) and carefully move the
shoulder support to the desired position. Lock these handles in place to ensure this
section of the headrest will not move. Ensure the three adjustable handles on the
head support are secured also.
1312
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
1300
133
120
www.aidacare.com.au
seat back.
Vinyl:
Cleaning and Maintenance of Fabrics
Vinyl:
permanent staining.
Cleaning:
be cleaned with warm soapy water followed by a clean water rinse to help retain
patent chemical cleaners should not be used as they are unnecessary and may cause
areas may cause the vinyl to harden.
Dartex Multi Stretch Fabric (Patient contact surface)
Properties:
mycotic) coatings to provide an impenetrable barrier to virus and bacteria.
Superficial dirt may be removed by wiping with a soft cloth moistened with water
containing a neutral detergent. More persistent contamination may be treated by
water and a neutral detergent or with a sodium hypochlorite solution (0.1% or 1000
solution must be removed and the surface thoroughly rinsed and dried prior to
reuse or storage. Proprietary disinfectants may be used provided manufacturer's
articles be thoroughly dried after all cleaning procedures and before storage.
14
End of Life (Disposal)
Please contact Seating Matters for disposal of your chair at the end of its lifespan.
Batteries may only be disposed of according to your local legal guidelines.
Safety
hazard.
Regional Variations
design variations of equivalent function and ease-of-use but with alternative
specifications or reinforcements.
15
WORKING ENVIRONMENT
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
patentsandtrademarksprotectedinmanyjurisdictionsthroughouttheworld.
TheSeatingMattersTrademarkisregisteredthroughouttheEuropeanUnionand
various countries globally.
INTELLECTUAL PROPERTY
1300
133
120
www.aidacare.com.au
Important
Parts can only be changed by service persons trained in Seating Matters products and
use only Seating Matters parts. We recommend that your chair is serviced every year by
a Seating Matters approved provider for any running repairs and maintenance.
Maintenance
Carry out the following regular checks to ensure the operation and safety of the chair.
If you are in any doubt about the functioning of your chair contact your Seating
Matters approved provider immediately.
Daily
Check that the castors are not damaged.
instructions.
Weekly
movement.
replace it.
Matters approved provider for replacement.
Monthly
Castors:
variation will cause restricted movement. If it is damaged contact your Seating
Matters approved provider for replacement.
Mechanisms:
Check all tilting mechanisms are working smoothly.
Check that cables are not kinked or frayed.
Check that all nuts and bolts are present.
Check that all nuts and bolts are secure.
and the chair until it has been serviced.
Leg rest: Check that all leg rests are easily removed/swung-away and replaced or
repositioned easily. Ensure that parts lock in place securely. If parts are not locking
try lubricating. If the problem still remains contact your Seating Matters approved
provider.
damage. If you find any of these things . Contact your Seating Matters
approved provider immediately.
16 17
KIDZ PHOENIX™ and KIDZ SORRENTO™ Instruction Manual
1300
133
120
www.aidacare.com.au
regarding your Seating Matters
chair please contact:
contact@seatingmatters.com
RESISTANT
1300 133 120 www.aidacare.com.au
This manual suits for next models
1
Table of contents
Other aidacare Mobility Aid manuals
