Aim FTG150 User manual

AIM SPORTS INC. WARRANTY
LIMITED LIFETIME WARRANTY - USA & CANADA ONLY
The Aim Sports Inc. Limited Lifetime Warranty covers against defects in materials and workmanship.
Aim Sports Inc. will replace or repair defective product(s) upon inspection by our technical staff. Defects
or damage from abnormal use, improper storage, unauthorized modifications, unauthorized repair,
misuse, neglect, abuse, alteration or improper installation will void the product(s) warranty and eligibility.
Limited Lifetime Warranty covers item(s) purchased from an authorized dealer, within the first 90 days
of ownership, with proof of receipt purchase (duplications only). Aim Sports Inc. will waive the $10.00
shipping and handling fee for returned product(s). Returned items over 90 days of ownership or no proof
of receipt purchase prior to 90 days, a $10.00 fee will apply to cover shipping and handling charges.
Make checks or money orders payable to: Aim Sports Inc.
RETURNING ITEMS
Before shipping item(s) back to Aim Sports Inc. a Return Authorization Number (RA#) must be obtained
by calling Technical Assistance. All return item(s) must be received with RA#. There will be a delay in
processing for all item(s) received without RA#.
IMPORTANT NOTICE!
DO NOT ATTEMPT TO SHIP YOUR PRODUCT BACK WITHOUT FIRST
CONTACTING OUR TECHNICAL ASSISTANCE:
AIM SPORTS INC.
TECHNICAL ASSISTANCE
Telephone: (855) ASK-4AIM
E-mail: [email protected]
WE WILL REPLACE OR REPAIR ANY DEFECTIVE ITEM THAT IS
PURCHASED OR MANUFACTURED BY AIM SPORTS INC.
TACTICAL GRIP
FLASHLIGHTS
Quick Start ManualAIMSPORTSINC.COM
Downloadable PDF Version Online

CAUTION
Always check and be certain that the firearm is unloaded
before undertaking any work upon it.
FTG150
150 Lumens Flashlight with Tactical
Aluminum Grip
FTG180
180 Lumens Flashlight with Tactical
Aluminum Grip
INSTALLING BATTERY
1. Unscrew battery cap located at end of tactical grip
2. Install two CR123A batteries, positive poles first
3. Replace battery cap
ON/OFF OPERATION
1. Press and release the button in the center of the on/off push
button switch
MOUNTING FLASHLIGHT
1. Loosen thumb-screw and place grip light on the rail
2. Tighten the thumbscrew to lock the flashlight in position
3. Tighten the hex screws until you feel a slight resistance.
WARNING: DO NOT OVER TIGHTEN THE SCREWS OR YOU MAY STRIP THE
THREADED HOLES. STRIPPED HOLES ARE NOT COVERED BY WARRANTY.
FEATURES
• Made of anodized aircraft grade aluminum
• Equipped with USA made CREE LED light bulb
• Integrated tactical strike bezel head and grip
• Weatherproof
• Picatinny/Weaver base mount
• Ambidextrous push button on/off switch
SPECIFICATIONS
LIGHT BULB USA CREE LED
MAX OUTPUT 150 or 180 LUMENS
VOLTAGE 3W
LENGTH 4.9”
NET WEIGHT 9.5 oz.
BATTERY CR123A
TACTICAL GRIP FLASHLIGHTS