Aim RC118 User manual

Media Center Remote Control and Receiver
RC118/IR603 User Guide

Media Center Remote Control/Receiver RC118/IR603
INDEX
1. Introduction…………………………………………………………………………2
2. Appearance…………………….……………………………………………………2
3. Features…………..…………………………………………………………………3
4. Package contents……………………………………………………………………3
5. System Requirements.....……………………………………………………………3
6. Installation and Operation……..…...…………………………………………….…4
7. Specifications………………….……………………………………………………4
8. Key definition………………..……………………………………………………5
9. Troubleshooting………………..……………………………………………………8
Caution!
No part of manual may be reproduced or modified without our express written permission; otherwise
the right of using the device will be cancelled.
Trademarks
Microsoft®, Windows®, and Windows NT® are U.S. registered trademarks of Microsoft Corporation.
IBM, DOS, and PC are registered trademarks of IBM Corporation. All brands, products and companies
are trademarks of registered trademarks of their respective companies.
Notice
The information contained in this document is subject to change without notice. All rights are reserved.
No part of document may be photocopied, reproduced, or translated to another language, for any
purpose, without our express written permission.
BM-RC118603/LF
1

Media Center Remote Control/Receiver RC118/IR603
Introduction：
RC118 Media Center Remote Control with IR603 Receiver is your best solution
to control the MCE on your Desktop or Laptop. It is compatible with Microsoft®
Windows®MCE certification and Green Button regulation. The easy connection
between RC118 and IR603 makes your entertainment more joyful.
Appearance：
Media Center Remote Control: Model name RC118
Receiver: Model name IR603
2

Media Center Remote Control/Receiver RC118/IR603
Features：
RC118 Remote Control
1. Microsoft®Windows®MCE certification and Green Button support
2. With all of the buttons and functions necessary for Microsoft®certification,
including official Green Button.
3. Small USB dongle style receiver
4. Use standard Microsoft®drivers, no software to install.
5. It could wake the system from S1 or S3
6. Infrared Rays Frequency：38KHz；Infrared Rays transmission distance：7~10
meter
IR603 Receiver
1. Receiver with USB Port, it’s easy to connect with your computer
2. Support one indication LED for the system level interaction
3. Use in-box Windows®drivers
4. RC6 and MCIR keyboard protocols are supported
5. It could wake the system from S1 or S3
6. It consumes around 1.5mA in sleep mode
Package contents：System Requirements：
zMedia Center Remote
Controller (RC118) x 1
zReceiver IR603 (USB Port) x 1
zUser’s Guide
zAAA battery x 2
zUSB cable x 1 (optional)
zIntel® Pentium® III/IV PC 800MHz CPU or faster
z512MB RAM or above (1G recommended)
zDesktop or laptop computer running Windows®
Vista Home Premium or Ultimate
zUSB Port; PC platform
zGraphics card capable of DirectX9
3

Media Center Remote Control/Receiver RC118/IR603
Installation and operation：
1. Battery Installation -- Open the battery cover of the Remote Control and install 2
AAA batteries correctly.
2. Receiver Installation -- Plugging IR603 receiver (with USB Port on it) into the
USB port of your computer.
(Optional) If your package comes with a USB cable, you can use the USB cable to
bridge between your USB port and the IR603 Receiver and then put the IR603
Receiver in front of you to get a better signal transmission.
3. Operation -- Before you start to use it, please make sure the distance between
RC118 Remote Control and IR603 receiver is under an effective range and the
Remote Control aim at the IR receiver. You can use your Remote Control by
pressing any key you want.
Specifications：
RC118 Remote Control:
zOperation Voltage：2.4V~3.2V；Battery：AAAbattery x 2
zPower Consumption with input signal：< 450mA
zInfrared Rays Frequency：38KHz；Infrared Rays transmission distance：7~10
meter
zRemote Control size：54 x 180 x 20 mm
zRemote Controller Button Number：44~52 buttons
IR603 Receiver:
zReceiver size: 43 x 18.3 x 15.5 mm
zReceiver Interface：USB Port
zOperation Voltage：4.75V~5.25V
4

Media Center Remote Control/Receiver RC118/IR603
Key definition：
No. ICON Function Function Description
1 Start Start the MCE
2 Power Turn on/off the power
3 Rec Record the TV program you are watching
4 Stop Stop all the on going function
5 Rew Move backward
6 Play Run the function you want
7 Fwd Move forward
8 Skip Back Jump back to the previous one
9 Pause Stop all the on going function temporary
10 Skip Fwd Jump to the next one
11 Back Go back to the upper function group
12 Guide Start the Guide function
13 Left Move to the left side
14 Right Move to the right side
15 Live TV Start the TV
16 OK Run the current pointed function
5

Media Center Remote Control/Receiver RC118/IR603
No. ICON Function Function Description
17 Up Move to the up side
18 Down Move to the down side
19 Videos Start Videos Function
20 Music Start Music Function
21 Pictures Start Picture Function
22 Vol Tune the volume up/down
23 Ch/Pg Change the channel
24 DVD Menu Open the DVD menu
25 Clear Clear what you just input/choose
26 Enter Confirm what you just input
27 Recorded TV Start the Recorded TV function
28 Teletext Open the Teletext
29 Mute Turn off the vol immediately
30 Radio Start the Radio function
31 More Provide information of the current status
6

Media Center Remote Control/Receiver RC118/IR603
No. ICON Function Function Description
32 1 Number 1
33 2 Number 2
34 3 Number 3
35 4 Number 4
36 5 Number 5
37 6 Number 6
38 7 Number 7
39 8 Number 8
40 9 Number 9
41 0 Number 0
42 10 Number 10
43 11 Number 11
44 12 Number 12
45 * *
46 # #
47 Red Go to Teletex
48 Green Go to Teletex
49 Yellow Go to Teletex
50 Blue Go to Teletex
7

Media Center Remote Control/Receiver RC118/IR603
Troubleshooting：
Question Possible Reason Solution
RC118
Remote
Control
doesn’t
work
zNo battery installed, battery
dead, or the batteries are not
installed properly
zUn-correct MCE installation
zUn-properly connection
between the receiver and the
computer
zCheck the battery installation
and correct it
zCheck the installed MCE
program
zCheck the connection between
the receiver (USB port) and
computer (USB port) and
correct it
8