Aiphone AX SERIES User manual

AX-A, AX-AN (Surface Mount); AX-B, AX-BN (Semi-Flush Mount)
- INSTRUCTIONS -
The AX-A, AX-AN, AX-B, and AX-BN are interior sub stations designed for use with the AX system. The AX-A and
AX-AN sub stations are surface mount and will mount to a single gang box or can be set on a desk or table top.
The AX-B and AX-BN sub stations are semi-flush mount and can be mounted into a 6-⅛" H x 3-¾” W cutout in a
wall, or can be mounted using the model BBX-1E back box. The sub stations with the “N” at the end of the model
number include the PRIVACY feature, which prevents a master station from hearing audio from that sub location
while the Privacy button is engaged.
AX-A AX-AN
AX-B AX-BN
Speaker
Mic
Call Button
Privacy Button
8-3/16"
6" Dimensions same as AX-B
7-1/16"
5⅝"Dimensions same as AX-A
Pg. 1
Speaker
Mic
Call Button
Privacy Button
MOUNTING AND INSTALLATION:
AX-B/BN
AX-A/AN
Remove the directory cover from the front case using a small fine tip screwdriver. Loosen the screw under
the directory cover and remove the intercom unit from the back chassis. Secure chassis to box or wall using
supplied mounting screws. Connect wires to unit, then reinstall to chassis and reinsert directory cover.

WIRING DIAGRAM:
OPERATION:
Subs calling Master(s): Press call button on sub. Tone and LED light will be activated
at the master station(s). Communication at master is Push-to-talk or VOX hands free.
Communication at sub station is always hands free reply. Press OFF to conclude.
Master calling Sub: Press sub station’s selector button on master. Press TALK to
initiate, then speak either Push-to-talk or VOX hands free. Press OFF to conclude.
PRIVACY: On the AX-AN and AX-BN, press the privacy button to prevent the master
from monitoring your location. Press again to disengage Privacy mode.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone]
Toll Free Technical Support:
1-800-692-0200
FAX: [phone]
E-mail [e-mail]
Pg. 2
AX-inside subs Instr.
0307JD
SPECIFICATIONS:
NOTE:
Only information pertaining to the AX-A/AN/B/BN is included here. For complete installation, wiring, programming and operational
information, please refer to the AX Series Installation Manual, located on the CD that comes with the CEU, or on our web site. AX sub
stations perform operationally the same as the AX, IE, or IF series audio door stations.
Power source: Power provided by AX CEU (AX-084C, AX-248C)
Wiring Distance: 980' using CAT-5e
Dimensions: AX-A/AN: 7-1/16" H x 5-⅝” W x 2-3/16" D
AX-B/BN: 8-3/16" H x 6" W x 1-15/16" D
AX Sub
1
2
NOTE:
1 PS-2420UL per system
when all subs are audio-only.
If any video door stations are
on the system, 2 PS-2420UL
power supplies are required.
CAT-5e
CAT-5e
Note: Wire from sub can be 2-
conductor, but must be spliced to
CAT-5e with RJ-45 jack at CEU.
* AX series subs include: AX-A, AX-AN, AX-B, AX-BN, AX-DM, IF-DA, IE-DC, IE-JA, IE-SS, IE-SSR
Homerun each sub to
AX-084C, AX-248C, or
AX-320C CEU.
1
2
AX-Series Audio
Only Station*
TIA/EIA 568B Standard:
Connect 3/6 pair (green) to “1”
Connect 7/8 pair (brown) to “2”
CAT5e
Illustration of converting from
2-conductor to CAT-5e cable.
Use your preferred method for splicing cables
to interface a standard 2-conductor cable run
from the door station to the CAT-5 cable and
RJ45 jack, required for connection to the CEU.