Aiphone AI-PU200 User manual

1. SAFETY PRECAUTIONS
• Be sure to read the instructions in this section
carefully before use.
• Make sure to observe the instructions in this
manual as the conventions of safety symbols and
messages regarded as very important precautions
are included.
• We also recommend you keep this instruction
manual handy for future reference.
When Installing the Unit
• Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
• Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
• Install the unit only in a location that can
structurally support the weight of the unit and the
mounting bracket. Doing otherwise may result in
the unit falling down and causing personal injury
and/or property damage.
• Do not use other methods than specified to mount
the bracket. Extreme force is applied to the unit
and the unit could fall off, possibly resulting in
personal injuries.
When the Unit is in Use
• Should the following irregularity be found during
use, immediately disconnect the power supply plug
from the AC outlet and contact your nearest
AIPHONE dealer. Make no further attempt to
operate the unit in this condition as this may cause
fire or electric shock.
· If you detect smoke or a strange smell coming
from the unit.
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
· If it is malfunctioning (no tone sounds.)
• To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest AIPHONE dealer.
• Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
• Do not touch a plug during thunder and lightning,
as this may result in electric shock.
When Installing the Unit
• Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
• When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
• Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
• Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
• If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
AI-PU200POWER TRANSFORMER UNIT
INSTRUCTION MANUAL
WARNING
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
CAUTION
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
Sold by:
http://www.TWAcomm.com
Toll Free: [phone]

6. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Mounting brackets ...................................... 2
Round head wood screw (3.5 x 25) ........... 4
Power Requirements 110 V/120 V AC, 50/60 Hz
Output Voltage 20 V AC (2 outputs)
Output Current 2.5 A (2 outputs)
Finish Pre-coated steel plate, ivory
Dimensions 160 (w) x 68 (h) x 178 (d) mm
Weight 2.8 kg
Printed in Japan
133-06-235-70
1. Terminal block
2. Input voltage selector
3. AC cord
4. Wall mounting bracket
Unit: mm
140
120
165 115
178
65
68
1
2
3
4
160
5. INSTALLATION
Step 1. Remove 4 case fixing screws and fit the
supplied wall mounting brackets.
Step 2. Fix the unit on the wall. Use the supplied
wood screws (3.5 x 25) as appropriate for
mounting.
Case fixing screw
Wall mounting bracket Wood screw 3.5 x 25
(supplied)
2. GENERAL DESCRIPTION
The AI-PU200 is a power transformer unit having 2 outputs of 20 V AC and 2.5 A each. It can be mounted on
the wall.
3. HANDLING PRECAUTION
This product is designed for exclusive use of AIPHONE intercom systems. Do not use for other systems.
4. NOMENCLATURE
Sold by:
http://www.TWAcomm.com
Toll Free: [phone]