AIPTEK PENCAM VOICE User manual

@n IP Company
AIPTEK PENCAM VOICE
Installation Guide
English

How to Use Your Digital Camera
Introduction
The built-in memory of your camera is 64 Mbit memory. It supports voice
recording and two kinds of resolution- high resolution ( 640x480 VGA)
pictures and low resolution ( 320x240 QVGA ) pictures. Besides, your
camera offers several functions on the LCD, showing the remaining number
of pictures as well. With a USB cable, you can transfer all the pictures and
sounds to your PC.
Installing Batteries
Your camera is powered by 2 AAA batteries or by a PC via a USB cable.
***Notes ***
When batteries are removed, all of the stored pictures and sounds are
cleared. ( Battery Capacity: continuous snapshot for 2 hours, stand by
works for approximately 2 weeks.)
English

View Finder
Lens
Speaker
USB Port
Shutter Switch
()Sw1
Microphone
Mode Switch
()Sw2
LCD Display
Battery Cover

Selecting Functions
Your camera has two switches - the shutter switch(SW1) and the mode
switch ( Sw2 ). As you keep pressing the mode switch, the LCD indicates "
Hr, 26, Ar, Ap, dA, dP, dC, Ct, St, CL, and Lr" icons in order. To select the
icon you want, press the shutter switch. Note! If an icon is not selected
within 5 seconds, the LCD goes back to the picture remaining number. The
following chart shows the function of each icon.
High resolution ( 26 images at most )
Picture remaining number
Voice recording
Voice playing
Delete the previous voice recording
Delete the previous voice playing
Delete the previous continuous snapshot
Continuous snapshot
10-second self-timer
Clear all images and sounds
Low resolution ( 107 images at most )
Press SW2 to change features
Features are displayed
Press SW1 to select mode
English

(Picture remaining number)
Taking a picture
Press the shutter switch to take a picture. A high pitched beep indicates that a
picture is taken successfully and the counter decreases as well. A low beep
indicates insufficient light to shoot. A series of beeps suggest that the camera
is full.
Switching the camera on / off
Keep pressing SW2 until the LCD is activated, and the
camera turns off after 30 seconds of inactivity. The LCD
indicates "Lr" for low resolution (QVGA images) and "Hr" for
high resolution(VGA images). The LCD then displays the
number of the remaining pictures. To turn off the camera,
press SW2 for 2 seconds.
Voice recording
Press the shutter switch until the LCD changes to indicate
"Ar". Then hold the shutter switch to record sound. To stop
recording, release the shutter switch; to resume recording,
press the shutter switch. button again.
Change mode to "Ar"
"Ar" is displayed
Hold the Sw1 button to record voice,
releasing to stop.
ON
OFF

Voice playing
Press the mode switch until the LCD changes to indicate
"Ap". Then press the shutter switch to play recorded sound.
Delete the last stored
Press the mode switch until the LCD changes to indicate
"dP", "dA" or "dC". When pressing the shutter switch, the
LCD starts blinking. Press the shutter switch again within 5
seconds and your camera deletes the last stored image,
sound or continuous snapshot.
Change mode to "AP"
Change mode to "dP", "dA" or "dC"
"AP" is displayed
"dP", "dA" or "dC" is
displayed
Press SW1 to play recorded voice
Press SW1 twice
to delete the last stored
English

Self Timer
Press the mode switch until "St" appears on the LCD. Then
press the shutter switch and a 10 second self-timer starts.
Every 10 second the camera issues a short beep. When
completing the self-timer, a longer beep sounds, which
indicates that a picture is taken.
Note: The self-timer can't work when the memory of your
camera is full.
Change mode to "St"
"St" is displayed
Press SW1 to initiate the self-timer mode
Change mode to "Ct"
"Ct" is displayed
Press SW1 to select Continuous mode
Continuous mode
Press the mode switch until "Ct" appears on the LCD. You
can take a series of pictures in quick succession by holding
down the shutter switch. The function stops as you release
the shutter switch. If the "Ct" icon is not selected within 5
seconds, the LCD reverts back to the remaining number of
the pictures .
Note: Even if the light is insufficient, the continuous mode
still works. However, the pictures you shoot will be too dark
or too vague.

Clearing all the stored
Press the mode switch until CL appears on the LCD. Press
SW1 and after a beep the LCD starts to flash . Press SW1
again within 5 seconds and all and
the picture counter are cleared.
the camera memory
Changing the picture resolution
Picture resolution may only be changed when the camera
memory is empty. If there are any pictures stored in your
camera, the memory must be cleared first. To change
resolution, press the mode switch until the resolution icon is
displayed. To select "Hr" or " Lr", press SW1. Then the
LCD shows the number of remaining pictures at the current
setting.
Change mode to "CL"
"CL" is displayed
Press SW1 to select clear mode
LCD starts to flash
Press SW1 to clear the memory
Change mode to "Hr" or "Lr"
"Hr" or "Lr" is displayed
Press SW1 to change resolution
English

How to Download Photo, Video and Audio to PC
Thank you for purchasing the Digital Camera. This guide will help you install
your camera onto your computer system.
Digital Camera Manager Installation
Place the CD into your CD-ROM and click on the Digital Camera Manager
Icon to begin the installation.If the CD does not automatically display, simply
go to "Start" then "Run" and select the path "D:\Setup.exe". You may need
to replace "D" with the letter that corresponds to your CD-ROM drive.
Now your computer is initializing the Wise Installation Wizard. Please wait.
Digital Camera Manager
After the welcome screen appears, click "Next".

The CD begins installing the driver to the proper location.
The dialog box that appears asks if you would like to restart your computer
now or later. Press "OK" to complete installation.
English

Start Digital Camera Manager
The digital pictures can be transferred at all times, even if you shoot only
one image. To connect your camera with your PC, you need a USB cable
and USB port. Your camera double beeps when successfully connected
with your PC. Don't worry! All of the stored images in your camera are still
alive. Your PC offers power for your camera. When disconnecting the USB
cable, your camera turns off automatically.
Connect the smaller end of the USB cable to
the USB port of your camera.
Note: When plugged into a USB port,
your camera is powered by the PC. You
may remove the batteries. However, all
pictures and sounds are cleared when the
USB cable is unplugged.
USB
Plug the larger end of the USB cable to
the USB port of your PC.

Mode Selecting
=
=
Press the "Live View" button to change the camera to PC Camera mode.
Press the "DSC Function" button to change the camera to DSC &
Camcorder mode.
=
=
Live View (PC Camera Mode)
DSC Function (DSC Mode)
To start using the Digital Camera Manager, simply click on the "Start"
menu and go up to "Programs" Then go to the folder named "PenCam
VoiceRecorder" and select it. This is the program where you can begin to
use your camera.
English

=
=
PC Camera Mode
It is easy to attach your camera to your system. our camera
is used as a standard PC camera.
In this mode, y
The current view is displayed in the "preview" window.
=
=
=
=
Press "Video Source" button to adjust
advanced settings.
Press "Video Format" button to set image
size.
Press "Snap Shot" button to capture an
image to the album window.
Press "Record button" to record a video clip
to album window.
PC Camera Mode
Live preview

DSC Mode
Transferring Photos :Voice and
This allows you to transfer photos in your camera.
Press the "Link" button to connect the camera and transfer photos &
sounds.
Press the "Album" button to open the album window.
<
=
>Press the "Transfer all" or "Transfer selected" button to transfer photos or
sounds to the album window.
=
=
=
=
Transfer pictures and sounds in your camera to your
PC.
Open or close album window
Transfer selected photos and sound to album
window
Transfer all photos and sound to album window
=
=
English

Playing picture or voice:
You can play any picture file you want in the album
window by double clicking the picture icon to execute your default media
application. In the browser or album, voice files are depicted by a speaker
icon. Click the speaker icon to play the voice.
browser or in the
Browerser
Album
Voice icon
Picture icon
Enhanced Resolution Mode:
The Largest Resolution : XGA( 800K pixels )
Optical Resolution: VGA ( 300K pixels)
Your camera has particular enhanced image skills, which make images
sharper by enhancing the original VGA image to XGA image.
How to operate:
=
=
=
=
Click the setting button.
Click " picture ".
Choose " Enhanced resolution ".
You can download your images again.

Image/Audio Sync.
This button allows user to select any image and voice files and
convert them into an AVI file. This AVI file is transferred to your
album window.
Editing Photos:
It is easy to edit any photo you want in the album window. Double click the
photo icon to execute your default image application (such as Imaging,
Paint....etc.) to edit your image file.
Image/Audio Sync.
English

Uploading Video:
After transferring images to the preview window, click AVI Creator and all
images are combined in one AVI file. This AVI file is saved in your album
folder.
Note: Pictures in AVI files can be placed forward or backward.
AVI Creator
(Reverse)
AVI Creator
AVI Creator:
<
=
Select Images you want.
Press "Setting" button to adjust frame rate.
>Press "AVI Creator" button to create an AVI file.
If there are any sound files in the preview window, picture files may
combine with the sound files into AVI files in the album window .

Playing Video:
You can play any video clip file (AVI format) you want in album window by
double clicking the AVI file icon to execute your default media application.
Image processing:
Click the" Image Process" button to choose image settings.
Image Process
English

Album window:
Delete
Select All
Making Your Album Folders
Transferring Image and Sound Files
Click the button. All the files you select in the album window are cleared
forever. Therefore, you should be very careful with the delete button.
Click the button. You select all the files in the album window.
Click the button and key in your file name. Then you'll have a
new album folder, which can store lots of images or video files.
If you want to cancel any of the album folders, just select the
album and click the delete button below.
Click the button. You transfer all the images and sounds
in your camera to your PC.
Mail Function:
Click the "Mail" button to attach selected image to a new email document. it
is easy to send images to your family and friends!
Mail

@n IP Company
AIPTEK PENCAM VOICE
Installation Guide
Deutsch