Airboard PRO BUGGY User manual

Instruction
Manual
BUGGY
BUGGY-01
MODEL:
For use with all Airboard PRO models
www.airboardpro.com
Also available to
download online
NEED HELP?
See our assembly
video online

Safety Information
OK,
lets
build
your
Buggy...
Airboard PRO Limited, Charter Buildings, 9 Ashton Lane, Sale, Trafford, Manchester M33 6WT
Model: Buggy-01 Year of Manufacture: 2020 More information at: www.airboardpro.com
Please check the contents of your box before beginning
to build your Airboard PRO Buggy...
1 Seat
2 Arms (2)
3 Arm Holders (2)
4 Velcro Straps (2)
5 Seat Platform (1)
6 Chassis Extender (1)
7 Board Protector Stickers (4)
8 Short Screws (4)
9 Long Screws (4)
10 Nuts (8)
11 Spanner (1)
12 Allen Key (1)
CONTENTS
Need Help? We’ve made a “Build your Buggy” video guide for you...
Please visit: www.airboardpro.com to view it.
12
10
11
8
7
6
5
4
3
2
1
9
Chassis
Length
Adjustment
Screw
Washers
and bolts
Adjust
Foot Clamp
Length
Here
Foot Clamp
Length
Adjustment
Screw
Attach Arm Holders to
Seat Platform using
washers and bolts.
Attach and tighten
with Spanner.
Add Board Protector
Stickers, long ones on
the front, small ones to
the rear to protect your
Airboard PRO shell.
Loosen Chassis Length
Adjustment Screw, insert
Chassis Extender into
Seat Platform and tighten
to your desired length.
Attach both Arms to
both Arm Holders using
Long Screws and Nuts.
Tighten with Spanner
and Allen Key.
With Buggy upside
down, add your
Airboard PRO to Seat
Platform and tighten
Velcro Straps.
1
5
2
6
3
7
4
Learn to ride in a safe place on at ground and away from obstacles. Stop completely before getting off. Ride on even ground. Ride in a
safe and responsible manner. Do not attempt wheelies or tricks that could result in injury. Be aware of pedestrians, obstacles and uneven
ground. Keep your Airboard PRO and Buggy clean, dry and free from debris. Be patient and take the time to practice before you ride
in a congested environment. Be considerate to others when using your Airboard PRO & Buggy. Please make sure you wear a helmet,
protective clothing such as elbow pads, knee pads and wrist guards and also gloves to protect your hands and ngers when riding.
Don’t ride through puddles. Don’t allow untrained riders to ride your Airboard PRO Buggy. Don’t ride in a careless manner as serious
injury could occur from misuse, or you could break your Airboard PRO Buggy. Don’t ride on sand or mud, it won’t handle and we don’t
advise it. Don’t ride at full speed for prolonged periods as this can make it difcult for the Airboard PRO Buggy to maintain balance, as
well as cause unnecessary strain on the Airboard PRO components, as well as risk your safety. It is not designed for high speeds. Only
one person on the Buggy at any one time. Please take your time to understand the controls of the Airbboard PRO when the Buggy is
attached. Maintain safe stopping distances at all times. Maximum load 150kg. Users ride at their own risk.
Add Seat to the Seat
Platform using the Short
Screws and remaining
4 Nuts. Tighten using both
Spanner and Allen Key.
Flip the Buggy over. Buggy must sit 100% ush onto
your hoverboard foot pads by making sure the Buggy
Foot Clamp Lengths are set wide enough to accept
your Airboard PRO. Once wide enough tighten Foot
Clamp Length Adjustment Screws.
How to build your Airboard PRO Buggy...
Adjust
Foot Clamp
Length
Here