Aircon Off Smart Remote User manual

V5.17
SMART REMOTE
UNIVERSALACREMOTECONTROLWITHPOWERSAVING
SET UP INSTRUCTIONS AND OPERATING MANUAL
COMPATIBLE WITH 99.99% OF AC UNITS WORLDWIDE
This Smart Remote is guaranteed to be compatiblewith
your air conditioner.
Please read these instructions carefully before youstart.

Aircon Off Smart Remote Features:
Easy Pairing and Setup
An Access Code Lock prevents un-authorised access to the Set Up Function. Keeping your remote
securely synced with your air conditioner (AC).
Once unlocked, fast and easy pairing with any AC is reliable, quick and efficient.
Directly input the AC Brand Pairing Code (found at the back of this manual) using the numeric
keypad. Alternatively if your brand is not listed you can use the unique Auto-Search function, where
the Smart Remote will automatically search for a code that syncs it to your AC.
Energy Saving
The Energy Saving features of this remote will work with any AC.
Programmable Temperature Ranges
The Smart Remote is preset to allow the AC to operate at an energy saving 21-30 °for Cooling and
17-23° for Heating. By using the Set Up Function you can change these temperature ranges if
required. It is possible to select any range between 17°-30°,separately for Heat and Cool.
Other Features
The Aircon Off Smart Remote has the full range of features you would expect to see on a standard
remote, including, Backlit LCD Screen, mode, fan, swing, room temperature display and a choice
of Celsius or Fahrenheit. Also a Smart Button “Fast Start” function for "Instant Cooling" and "Instant
Heating"
SETTING UP THE SMART REMOTE
TO MAKE ANY SET UP CHANGES THE SET UP FUNCTION MUST BE UNLOCKED
Installing Batteries
Remove the battery cover on the back of the Smart Remote. Insert two AAA (VM-4, R03) batteries,
Should the remote not turn on, refer to the Troubleshooting Section at the endof this guide.
How To Unlock the Set Up Function Keypad
The Set Up Function Lock prevents unauthorised program changes.(Tampering).First, slide down
the keypad cover on the front of the remote.
When you
are finished,The Set Up Function can be locked by pressing the “ENTER , OK” key. If no buttons
are touched for 3 minutes, the Set Up Function will automatically lock itself.

3
How to preset the Minimum and Maximum Temperature Settings
The Smart Remote is supplied with energy saving default temperature operating settings of 21°-
30° for Cooling Mode and 17° -23° for Heating Mode. It is possible to adjust these preset limits as
required. The temperature ranges that a user can access can be changed to any value between
17° – 30° separately for each Mode. (Eg. 23°-29° for cooling and 18°-21° for Heating). The
minimum and maximum values for a range must be at least one degree apart.
How to Set Minimum Temperature for Cool Mode.
If necessary unlock the Set Up Function.
1. Simultaneously press both the “SELECT” button & the “TEMP –“ (Down) ” button for 3
seconds, screen will flash “Lo”, then release.
2. Press and release “iCOOL” button. The “COOL” symbol will flash. Then enter chosen
minimum temperature for Cool mode by using the Temp “+” & “-“ buttons.
3. Press and release the OK/ENTER button to lock it in.
How to Set Maximum Temperature for Cool Mode.
If necessary unlock the Set UpFunction.
1. Simultaneously press both the “SELECT” button (S) & the “TEMP +” (Up)” button (next to
Blue Power Button). After 3 seconds, the screen will flash “Hi”, then release.
2. Press and release “iCOOL” Button. The “COOL” symbol will flash. Then enter chosen
maximum temperature for Cool mode by using the Temp “+” & “-“ buttons
3. Press and release the “OK/ENTER” button to lock it in.
How to Set Maximum Temperature for Heat Mode.
If necessary unlock the Set UpFunction.
1. Simultaneously press both the “SELECT” button & the “TEMP +” (Up) button for 3 seconds.
The screen will flash “Hi”, then release.
2. Press and release “iHEAT” button. The “HEAT” symbol will flash. Then enter chosen
maximum temperature for Heat Mode by using the Temp “+” & “-“ buttons.
3. Press and release the “OK/ENTER” button to lock it in.
How to Set Minimum Temperature for HeatMode
If necessary unlock the Set Up Function.
1. Simultaneously press both the “SELECT” button & the “TEMP –“ (Down) button for 3
seconds. The screen will flash “Lo”, then release.
2. Press and release “iHEAT” button. The “HEAT” symbol will flash. Then enter chosen
Minimum temperature for Heat Mode by using the Temp “+” & “-” buttons.
3. Press and release the “OK/ENTER” button to lock it in.

4
How to Use Direct Code Input Method.
When your AC IS LISTED on the brand code list
1. From the Code Table, select the correct codes for your brand. Start with the first
code, if this does not operate your AC, try the second code and so on.
Note: There are often many possible codes. Each code in the list is separated by a
comma"," or hyphen"-". Commas separate individual codes and hyphens show a range of
codes. For example: 0200-0205 means 0200, 0201, 0202, 0203, 0204, 0205.
2. If necessary unlock the Set Up Function.
3. Press and release the “S” “SELECT" key, the Model Code display will flash on the LCD.
Using the keypad enter the selected 4 digit code. Press each digit in turn. The Smart Remote
accepts the code automatically and the code numbers stop flashing. To test a code use the
Blue Power Button. If it turns the AC “On”, try other function keys. If the AC does not turn “On”
or if other functions do not work correctly, then try another code. To input another code then
press and release “S” again and enter the new code. Repeat this until all functions work
correctly. If the keypad becomes non responsive unlock again using the“Time+” key.
How to use Smart Remote Brand Code Auto-Search
(When Listed Codes Don’t Work or the Brand is Not Listed)
1. If necessary unlock the Set Up Function.
2. Aim the Smart Remote at your air conditioner.
3. Ensure your air conditioner is on at the mains but not running. Press and hold the “S”
"SELECT" key for 5 seconds and then release. The Smart Remote will go into auto-search
mode and will emit a continuous signal. The code numbers on the LCD display will flash and
then steadily increase. Keep the remote pointing at the AC. (If the code numbers start too
high, use the “TEMP Up & Down” keys to scroll to the code that you want to start the Auto-
Search from.) When the AC receives a signal it recognises it will make a beep and turn on.
Immediately press any key to stop the count on that code. If you don’t stop the count in time
you will need to scroll back to the lower code number required.
4. Test the code fully by trying all normal function keys. If they do not work correctly with the
AC you have not found a totally compatible code. Repeat steps 1 and 2 until a completely
correct code is found and the AC operates normally.
How to Pair the Smart Remote with your Air Conditioner
The Smart Remote Pairing Code Page at the end of this manual lists most major brands of air
conditioners and the associated Smart Remote Brand Codes. These Smart Remote Codes do
not relate to specificair conditioner model numbers.
If your brand is listed, use the Direct Code Input Method.
If your brand is not listed or if the listed codes are not successful with your AC, then use the
Auto Search function to find the matching code.
This is a link to Smart Remote Pairing information and videos:
https://www.airconoff.com.au/smart-remote-setup

5
Mode Symbols
Batteries
Always use high quality Alkaline batteries., lf it is not intended to use the Smart Remote for an
extended period, remove the batteries to avoid battery leakage which will damage the unit.
Batteries
Always use high quality Alkaline batteries., lf it is not intended to use the Smart Remote for an
extended period, remove the batteries to avoid battery leakage which will damage the unit.
Clock Set Up
Press the "Clock" key once, the clock signal will flash.
Press the "Time + or Time -" keys, to set the current time.
Press the "Clock" key again, the time signal will stop flashing, the time is now set. (If you do not
press the "Clock" key again, the function will auto-lock after 15 seconds)
.
Please Note:
lf it is not intended to use the Smart Remote for an extended period, remove the batteries to avoid
battery leakage which will damage the unit.
The LCD normally displays the time. By pressing the "ENTER, OK" key, the current Brand Code is
showed on the LCD. After 5 seconds the display will return to the clock.
Changing the display between Celsius and Fahrenheit.
Press and release the "C/F" button. The display will change between Fahrenheit and Celsius.

6
Technical Specifications:
Controllable distance: Greater than8 meters Power supply voltage: DC 3V
Battery model: Battery 2 x AAA(UM-4 , R03) Dimension: L 165mm x W55mmx D25mm
Weight: Approx 100g (excl.Batteries)
THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES AND/OR
IMPROVEMENTS IN DESIGN, FORM & FUNCTION AT ANY TIME WITHOUT NOTICE AND
WITHOUT INCURRING OBLIGATION.
Troubleshooting
Blank Screen. Dim Screen, or if your Remote is not responding
First change batteries. (Never mix new and old batteries together) If after changing
batteries the screen stays blank, the remote needs to be reset/rebooted. Reset the unit by
pressing the recessed “RESET” button on the keypad with a blunt point like a pencil or
pen.
Do not use a sharp point like a pin.
The remote will not lose its settings when you change batteries or if you use the reset
button, but you may need to reset the clock.
Incorrect LCD Display or Unusual Operation.
Reset the unit by pressing the recessed “RESET” button on the keypad with a blunt point
like a pencil. Do not use a sharp point like a pin. The remote will not lose its settings when
you use the reset button but you may need to reset the clock.
During Set Up if the Smart Remote is not operating the AC correctly or if
the AC won’t turn “Off”
Some codes are quite similar. During Set Up the AC may recognise a “partial” Code and
you may find that only some functions will work correctly.
In that case continue pairing steps I and 2 until the correct code is found. If a particular
code turns the AC ‘On’ but not ‘Off’ it may be necessary to turn the AC “Off” by using the
AC’s original remote if available. Alternatively turn the unit off by using the Emergency “Off”
push button (usually located under the filter cover on the front of the AC wall unit. (Please
refer to your AC owners manual). Or you may turn the power supply to the AC “Off” and
“On” again via the mains supply or circuit breaker. Once the AC is back in standby mode
continue the code search. Repeat Pairing steps 1 and 2 until the correct code is found and
the AC works normally.
During Set Up Keypad Inputs Not Working
If the keypad does not respond to a setting input it may be because the keypad has
become locked, If necessary unlock the Set Up Function again.

®
SMART REMOTE 28.12.16
UNIVERSAL POWER SAVING AC REMOTE CONTROL
BRAND Smart Remote Code BRAND Smart Remote Code
ACSON 0234 KANGLI 0374,0375,0654,1399,1910
AGREE 0107,0108 KELON 0282‐0287,0473,0485‐0488
AGER 0489,0785 KELVINATOR 0151,0197,0203,0619,1007,1024, 1133
AIRWELL 0529,0555,0556 KLIMATAIR 0225,0226,0452,0737‐0738,1761
ALPIN 0252,0253,0617,0764,0765,1277,1789 KOLIN 0416‐0418,1441,1952
ARENA 0206,0212,0229,0718,0724,0741 KONKA 0397,0457‐0459,1933
ARLEC 0202 LENNOX 0234,0260‐0265,0522,0523,0568,0773,0582,
ATD 0169,0170 LG 0197‐0200,0504‐0514,0567,0572,0710,1026,1733
AUCMA 0288‐0296,0462,0802,0807,0901,1313,1998 LIANGYU 0233,0451,0745,1257
AUSSIEAIR 0809 LITTLEDUCK 0015‐0020,0528‐0531,1043
AUX 0297‐0300,0451,0474,0475,0810‐0812,1987 LOREN‐SEBO 0255,0471,0472,0767
BANSHEN 0264,1288,1800 LUXAIRE 0297
BLUEWAY 0300 MACQUAY 0234‐0237,0465,0468,0472,0587,0746‐0747,1773
BOERKA 0383,0434,0436,0437,0522,0948,1407,1972 MICOM 0415,0927,1951
CARRIER 0203‐0209,0235,0456‐0458,0482‐0486,0563‐0565,05901933 MIDEA 0260‐0265,0522,0523,0568,0773, 0582,1289,1976
CELESTIAL 0108,0307 MISTRAL 0237
CHANGHONG 0301‐0308,0627,0813‐0815,0820,1843 MITSUBISHI 0001‐0045,0476‐0479,0515,0522,0523
CHIGO 0379‐0382,0489,0515,0890‐0894,1403,1916 0556,0567,0568,0582,0695,1502
CHOFU 0184‐0187,0581,0696,0698,1209,1723 MITSUBISHIHVY 0043, 0568
CHUNLAN 0345‐0350,0450,0453,0545‐0546,0862,1373 NECNATIONAL 0138‐0154,02000483,0490‐0492,0653,0658‐0666,
CLIMAVENETA 0572 NORITZ 0431,1455
CORONA 0155‐0163,0459,0561,0667,0675,1180,1995 OMEGA 0559
CONIA 0570,0571,0806,0812,0861 OMNI 0146,0262
CONROWA 0377,1401,1913 PANASONIC 0138‐0154,0483,0490‐0492,0653,0658‐0666,1507
CONSUL 0463,0718,0734,0975 PANDA 0378,0505,0509,0763,0890
COOLINE 0187,0206 PHILCO 0210,0211,0487‐0490,1746
COUNTRYAIR 0560 POLARICE 0570‐0572
DERBY 0311 PROTON 0421‐0423,0933,0934,0956,1958
DAEWOO 0203‐0209,0406,0715‐0718,1942 RAYBO 0362‐0367,1386,1898
DAIKIN 0171‐0183,0566,0567,0574,0577,0583,0685,0693‐0695, RINNAI 0297‐0300,0451,0474,0475,0810‐0812,1987
DELONGHI 0151,0232,0482 ROWA 0369,0438,0439,0494,0527,0531,1393
DEC/DHL 0504,0592 SABRO 0435,0506‐0508,1018,1020,1971
DAVINCI 0298,0400 SAIJODENKI 0212‐0215,0721‐0726,1750
DL 0302 SAMPO 0424‐0426,1448,1961
DOCTOR 0221,0449,1245,1985 SAMSUNG 0188‐0196,0503,0516,0518,0700‐0707,1015,1726
DONGBAO 0355‐0361,1385,1891 SANYO 0046‐0095,0519,0530,0558‐0562,0598‐0605,1582
DONGXINBAO 0413,0891,0925,1654 SASUKI 0254,0470,0654,0766,1494
EMAILAIR 0127,0553,0556,0558,0639,0642 SHANGLING 0384‐0388,0444,0445,1980
ELECTRA 0553,0557 SHANXING 0392,0449,1416,1985
ELECTROLUX 0216‐0220,0569,0728‐0733,1245,1752 SHARP 0096‐0106,0525,0542,0608‐0609,0617,0631,1640
FEDDERS 0498,0499,0500,0528 SHENGFENG 0376,0406‐0480,1504,1912
FRESTECH 0277,0495‐0497,0519,0520,06650789 SHINCO 0351‐0354,0454‐0456,1887
FUJIN 0002 SHUANGLU 0376,0404‐0407,0480,1941
FUJITA 0265,0297 SHUAIKANG 0288,0587,0800
FUJITSU 0127‐0137,0464,0509,0522‐0554,0640,0648,1152 SONGGE 0428,0429,1453,1964
FUNAI 0430,0481,1505,1966 SOVA 0409,0410,0921,1434
GALANZ 0371,0372,0521,0883,1908 SUMMER 0427,0672,1451
GE 0047 SUNDURG 0257,0505,1017,1793
GENERAL 0128‐0136,0639,0976,1161 STARWAY 0714,0345,0859
GUQIAO 0244,0291,0491,1268,1827 SWAN 0434,0477,0516,0524,0732,0946
GLEE 0398,0399,0521,0910,1935 TADIRAN 0246‐0251,0758,0762,1275
GOLDSTAR 0201,0466‐0469,0713,0978‐0980,1737 TATUNG 0419,0420,0931‐0932,1955
GREE 0309‐0316,0482,0512,0513
TCL 0273‐0281,0570, 0786‐0793,1305
HAIER 0266‐0272,0453‐0455,0538,0539,0778‐0781 TECO 0008, 0108,0109,1007,0232,0256,0473‐0475,0768,
HISENSE 0332‐0335,0340,0505,0506,0517,0671,0681,0847,1359, TIANDI 0415,0643,1439
HITACHI 0118‐0126,0178,0500,0501, 0605, 0630‐0631,0637,1145 TITANIUM 0339
HOFWELL/HELLER 0107,0282,0289,0811 TOSHIBA 0107‐0117,0489,0619‐0630,1001,1643
HOMEMAKERS 0297‐0300,0451,0810,0960,0963 TRANE 0227‐0232,0739,1768
HUABAO 0336‐0344,0848‐0855,1360,1878 UNI‐AIR 0222‐0224,0450,0734‐0735,1986
HUAKE 0408,0493‐0498,0920,1944
WANBAO 0138‐0152,0666,0905,0995,1177
HUAMEI 0402,0460‐0465,1426,1999 WEILI 0393‐0396,0907‐0908,1420,1929
HUALING 0317‐0325,0452,0964 WHIRLPOOL 0164‐0170,0502,0677‐0678,1760
HUIFENGHUIKANG 0370,0882 WINIA 0481,0550,0993

WINIA 0481,0550,0993
HYUNDAI 0202,0433,0480,0550,0551,0609,1226,1969
XILENG
0411
,
0412
,
0923‐0924
,
1947
JDC 0373,0440,0952,1909 YANGZI(YAIR) 0403,0488‐0493,0915
JETAIR 0169,0170 YINYAN 258,259,326‐331,0770,0838‐0844
JIANGNAN 0432,1456 YORK 0002,0107,0238‐0243,0501,0502,0573,
JINDA 0414,0926,1950 1266
JINSONG 0389‐0391,0446‐0448,0757,1984 ZHENBAO 0129‐0137,1151,1488,1664,
JOHSON 0245,0492,1269,1516
PairingCodeBrandList:
EachbrandonthelistcanhaveseveralSmartRemotecodes.Eachcodeinthelistisseparatedbya
comma","orhyphen"‐".Commasseparateindividualcodes,hyphensshowarangeofcodes.
Forexample:0200‐0205means0200,0201,0202,0203,0204,0205.
ForunlistedbrandsusetheSmartRemotesunique
ACBrand'Autosearch'Functionthatwillfindthecodeforyou.
SmartRemoteisguaranteedcompatibleoryourmoneyback*SmartRemote
SetUpandPairingVideo
Helpcanbefoundat
http://www.airconoff.com.au/smart‐remote‐setup