airdeer A1 User manual

Automatic Trash Can
Model A1
Instruction manual

Product Description
The Airdeer® automatic trash can A1 has automatic packing and bag loading function. One time
to install a refill bags, can be used about 20 times. There are other functions such as induction
flip lid, flip lid blocking back and voice prompts.
Cautions
Please read this manual carefully before using the product.
This product is limited for indoor use.
This product is made of plastic. Do not throw inflammable, explosive or burning items into
the trash can.
If you do not use this product for a long time, please turn off the power and store it in a cool
and dry place.
Please use a power adapter with a voltage of 5V and a rated current greater than 1A to
charge this product.
Avoid touching the infrared sensor port and keep the infrared sensor port clean.
When this product is faulty, please contact customer service, do not disassemble by
yourself.
Please refer to the instructions for correct use. Children should be accompanied by adults
to use, avoid using this product as a toy.
The illustrations of products and accessories in the manual are schematic diagrams, for
reference only. Please refer to the actual product.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Flip lid
Bag cabin lid
Big lid
Infrared sensor port
Touch key
Can body
Power switch
USB Type-c
chraging port

User's Guidance
Stitching thread head
Film of
garbage bags
Outer
packaging film
Refill ring Easy-to-open stitching
Automatic Trash Can A1 1pc
USB Type-c charging cable 1pc
Instruction manual 1 copy
Refill ring (Refill bags) Please see the outer packaging
Packing List
1. First time use
After you get the automatic trash can, please open the flip lid of the trash can, take out the
refill bags shipped with the product from the can and store it.
Learn about flexible packaging refill ring (refill bags)：Airdeer® automatic trash cans use
patented flexible-packaging refill ring, which is a continuous long tubular plastic film of
about 10 meters packed in a ring-shaped plastic film cavity. Using the patented
easy-to-open stitching method, the plastic film of the garbage bags can be separated from
the outer packaging film by simply pulling out the stitching thread, and can be continuously
drawn out by the automatic bag loading mechanism.
1.1.
1.2.
Install the refill ring：
Make sure that the power switch is in the OFF position, and then operate as shown in the
following diagram.
1.3.

If the voice prompts: "Failed bag loading, please check if the garbage bag is used up or
broken." please lift the flip lid manually and check whether the garbage bag is broken.
If the garbage bag has a rupture, but the rupture is relatively small, this section of the
garbage bag can still be used. You can manually press the garbage bag to the bottom of
the can and continue to use it.
If the garbage bag rupture is relatively large, this section of the garbage bag cannot be
used. Please manually press the garbage bag to the bottom of the can, and then carry
out the operation of packing and loading the bag again. For details, please refer to
Section 4 of the manual "Automatic Packing and Loading the Bag".
If the garbage bag is not broken after inspection, it is usually because the newly installed
refill ring is too tight, resulting in unsuccessful bag loading. Please manually press the
1.5.
Turn the power switch on the back
of the trash can from the left side to
the right side,that is, from the OFF
position to the ON position. The
trash can will load a bag automati-
cally, and then the voice prompt
"Bag loading is complete".
1.4.
01 Remove the bag cabin lid 02 Put in the new refill ring 03 Compress the Refill ring
all around
Bag cabin
04 Put on the bag cabin lid 05 Pull the stitching thread
all out

2. Infrared sensor flip lid
In order to achieve a full-coverage flip lid design, this product uses a patented side infrared
sensing technology. When close to the infrared induction port within about 10cm-20cm
above, the flip lid will automatically open, and the flip lid will automatically close after a delay
of a few seconds after leaving. Due to the weak reflection ability, the sensing sensitivity of
black or dark-colored objects will be reduced.
If the infrared sensing signal exists continuously for more than 5 seconds, the flip lid will
enter the normally open mode and will close only after pressing the touch key.
Commonly used methods to open the flip lid: one is to take the garbage into the sensing
area, the other is to bend the knee slightly and enter the sensing area.
Avoid touching the infrared sensor port and keep the infrared sensor port clean. When the
infrared sensor port is dirty, the sensitivity will be reduced, and the flip lid may move by
mistake.
2.1.
2.2.
2.3.
2.4.
3. Flip lid normally open mode
When the flip lid is in normally open mode, the flip lid will not close automatically, you need
to click the touch key once to close the flip lid.
When the flip is closed, tap the touch key once, the lid will open and enter the normally open
mode; tap the touch key again, the lid will close.
If the infrared sensor signal exists continuously for more than 5 seconds, the flip lid will also
enter the normally open mode.
3.1.
3.2.
3.3.
If the voice prompts "Low battery, please charge", please use the attached charging cable
to connect a power adapter with a voltage of 5V and a rated current of 1A or more to
charge. When the battery is low, bag will not be automatically loaded. Please fully charged,
then turn on the power switch to complete automatic bag loading.
1.6.
garbage bag to the bottom of the can and continue to use it. After using several times,
the inside of the refill ring becomes loose, then the bags can be loaded automatically.
Sensing
area

4. Automatic packing and bag loading
To save the use of garbage bags, you can open the flip lid before packing to check whether
the garbage in the can is higher than the light bar. If so, you can press the garbage first to
make it lower than the light bar.
Long press the touch key, the trash can will make a "di-di-di-" sound, until you hear the voice
prompt "Start packing", then the trash can starts to pack automatically.
If the voice prompts " It's overfull, please press the touch key within 5 seconds to keep
packing or compress manually and then repack. ", after that the trash can will sound "di--"
every 1 second. Press the touch key within 5 seconds, the trash can will automatically lift the
big lid for overfull packing; if the key has not been pressed at the end of the "di--" prompt,
the trash can will exit the packing program, then please open the flip lid to check. If you can
compress the garbage by hand, please press the garbage below the light bar, and make
sure it will not rebound, then long press the touch key again to pack.
In actual use, if you know that the garbage is overfilled and the height exceeds the LED light
bar, you can directly lift the big lid by hand without using the automatic detection function of
the trash can, and then long press the touch key for overfull packaging.
When the voice prompts " Packing complete, please take it out", take out the packed
garbage bag.
After that, the big lid will automatically close, and the bag loading will start automatically
4.1.
4.2.
4.3.
4.4.
4.5.
4.6.
If the flip lid has been opened by infrared sensor, tap the touch key once, the flip lid will enter
the normally open mode.
When the flip lid is opened by infrared induction, during the automatic closing process,
when the angle of the flip lid is still greater than 45 degrees, you can push or block the flip
lid with your hand, and the flip lid will automatically go back to the open state and enter the
normally open mode.
3.4.
3.5.
If the flip lid is in normally open mode, tap the touch key once, or close the flip lid directly by
hand, it will exit the normally open mode.
3.6.
Sensing
area
Automatic fallback
if blocked

7. Restart the trash can
When the trash can work abnormally, you need to restart the trash can.
To restart the trash can, first turn off the power switch, and then click the touch key to
quickly discharge the circuit board; then turn on the power switch, there will be a sound of
the fan rotating, and then a voice prompt "Welcome to Airdeer automatic trash can", then
the trash can restart is completed.
If after turning on the power switch again, there is no fan rotation and no voice prompt,
usually after the power switch is turned off, the circuit board has not been fully discharged
and the power is turned on again, the trash can has not restarted.
7.1.
7. 2 .
7.3 .
6. Install a new refill ring
If the garbage bag is used up, a new refill ring needs to be installed. There are two installation
methods.
Method 1: Do not turn off the power, install a new refill ring according to the figure ①, ②, ③,
④, ⑤ in section 1.3, then long press the touch key until the fan rotation sound, and there will
be a voice prompt after the bag loading is completed. If bag loading is unsuccessful, you
can follow section 1.5 to deal with.
Method 2: Turn off the power switch first, then click the touch key to quickly discharge the
circuit board. Then follow the sections 1.3, 1.4 and 1.5 of this manual.
6.1.
6.2.
5. Charging
When the trash can voice prompts "Low battery, please charge", please use the attachedcharg-
ing cable to connect a power adapter with a voltage of 5V and a rated current of 1A or more to
charge. The charging status lights up red, and lights up green when full.
8. Cleaning and maintenance
Please use a soft cloth with a small amount of water or neutral detergent to clean and wipe,
avoid scratching with hard objects, avoid rinsing directly with water, and do not soak in water.
For products with decorative lines, please wipe back and forth in the direction parallel to the
decorative lines.
until the voice prompts "Bag loading complete"。
If the voice prompt "Failed bag loading, please check if the garbage bag is used up or
broken", then follow the operation in section 1.5 of this manual.
4.7.

Parameters
After-sales service guarantee
Dear user, thank you for purchasing and using Airdeer® automatic trash can. This product starts
from the date of purchase (from the day after the user signs it), if there is any quality problem,
you can enjoy a one-year warranty service with a valid invoice. The service commitment is as
follows:
Note: The guarantee service refers to the failure caused by the quality problem of the product
itself. The merchant will repair, replace and return the product. During the guarantee period, the
failure caused by the customer's unauthorized disassembly and assembly of the product can
only be repaired at a fee; The returned products must be guaranteed to be in good condition
and will not affect secondary sales
within 7 days Returns, exchanges, repairs
within 15days Exchanges, repairs
within 365 days Repairs
Merchant undertakes
Merchant undertakes
Merchant undertakes
Duration Service enjoyed Fees
Product name Charging portAutomatic Trash Can USB Type-c
Model Net weightA1 2.96kg
Capacity Gross weight15L 3.80kg
Size Operating temperature282mm*243mm*411mm 0°C-+40°C
Battery Storage temperatureLithium 12.6V/2000mAh -10°C-+50°C
Charging time Execution standard7 hours GB4706.1-2005
Power adapter Package sizeDC 5V/1A 345(W)*302(D)*475(H)mm

Non-Warranty Regulations
The product has exceeded the validity period of the guarantees or has no purchase notes,1.
2.
3.
4.
vouchers, and valid purchase time records;
Product failure or damage caused by human factors;
Damage caused by irresistible factors;
Damage caused by self-disassembly, modification and repair without permission.