Aire Mate100 G User manual

1
BLE Pendant
AIRE Mate100 G User
Manual
Revision: 1.00
Document Title AIRE Mate100 G User manual
Version 1.00
Finale Date 2020-05-26
Status Released
Document Control ID Pendant AIRE Mate100 G

2
Contents
1 Introduction....................................................................................................................................3
2 Product Overview ..........................................................................................................................3
2.1 Appearance..........................................................................................................................3
2.2 Buttons Interface Description .............................................................................................3
2.3 LED Description.................................................................................................................4
3 Getting Started ...............................................................................................................................4
3.1 Parts List .............................................................................................................................4
3.2 Built-in Battery ...................................................................................................................5
3.3 AIRE100V Base station ......................................................................................................5
3.4 Power on/Power off.............................................................................................................6
4 Frequency.......................................................................................................................................6
5 Trouble shooting and Safety info...................................................................................................7
5.1 Trouble shooting.................................................................................................................7
5.2 Safety info...........................................................................................................................7

3
1 Introduction
AIRE Mate100 G is a BLE Pendant which is designed as accessory for Emergency call
equipment. It works on BLE protocol .It will report Beacon broadcast data by custom
protocol After the SOS button being long press for 3 seconds. The AIRE100V device
which receiver the Beacon broadcast will dial a emergency call.
The G-sensor function will be activated and report Beacon broadcast data by custom
protocol once the device is in alerting state. The BLE function will be activated and scan the
third-party BLE data or Beacon broadcast by custom setting or protocol.
2 Product Overview
2.1 Appearance
Figure 1-1
2.2 Buttons Interface Description
Button /USB Interface Description
KEY/interface Description
SOS Key long press for 3 seconds then report Beacon broadcast data.
long press for 10 seconds then reboot the device.

4
2.3 LED Description
Figure 1-2
There are 3 LED lights in AIRE Mate100 G device, the description as following.
Light Event State
RED LED Normal Dark
Power on Solid for 1 second
SOS key was long pressed for 3 seconds Solid for 2 seconds
Green LED Normal Dark
Power on Solid for 1 second
Blue LED Normal Dark
Power on Solid for 1 second
During the progress of OTA Flash every 5 seconds
3 Getting Started
3.1 Parts List

5
Name Picture Remark
AIRE100V Base
Station The LTE Base Station. will dial a
emergency call when receiver
the Beacon broadcast.
AIRE Mate100 G
Pendant The Pendant will report Beacon
broadcast data by custom
protocol .
3.2 Built-in Battery
The following items are suggestion for built-in battery usage, please pay more attention.
The device is a pendant ,which is designed to be used with AIRE100V Base
station .
There is a button battery(CR2450) integrated indevice. The Pendant will
automaticly power on whenthe button battery is assembled .
Note: If the AIRE Mate100 G device is firstly used, please make sure the adapter of the
device is plugged in the power supply socket.
3.3 AIRE100V Base station
The AIRE100V base station is a LTE/CAT1 emergency call device which could be used
to response to the Beacon broadcast data sending from the PD001 Pendant by custom
protocol .
The adapter is used for device power on, built-in battery charging , which should be
plugged in power supply socket at any time ( by end user)..

6
Figure 2-1
3.4 Power on/Power off
Figure 2-2
Power on:
The Pendant will automaticly power on when the button battery is assembled .
Power off:
UnPlugged the button battery.
Note: the user can change the button battery when the battery is dead.
4 Frequency
BLE:2402-2480MHz

7
5 Trouble shooting and Safety info
5.1 Trouble shooting
5.2 Safety info
The following items are suggestion for safety use, please pay more attention.
Please do not disassemble the device by yourself.
Please do not put the device on the overheating or too humid place, avoid exposure
to direct sunlight. Too high temperature will damage the device or even cause the
battery explosion.
Please do not use AIRE Mate100 G on the airplane or near medical equipment.
FCC Caution.
Trouble Possible Reason Solution
Unable to power on
AIRE Mate100 G.
The battery run out or
dead.
change the button battery(CR2450)
Beacon
broadcast data
can not be received
The PD001 is not in the
<white number list>
Add the SN of PD001 in the <white
number list> of AIRE100V by custom
protocol
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
(1) This device may not cause harmful interference, and(2) This device must accept
any interference received, including interference that may ause undesired operation.
§15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

8
§15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirment. The
device can be used in portable exposure condition without restriction.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment.The device has been evaluated to meet general RF
exposure requirement.
Le matériel est conforme aux limites de dose d'exposition aux rayonnements
énoncés pour fac un autre environnement.ce dispositif a été évalué à satisfaire
l'exigence générale de l'exposition aux rf.