airFiber AF60-HD User manual

Datasheet
AF60-HD

2 of 3
Mechanical
Hardware
LEDs
Dimensions Ø189 x 89 mm (Ø7.4x 3.5")
Weight Without Mount: 1.8 kg (3.9 lb)
With Mount: 2.95 kg (6.5 lb)
Enclosure Materials Aluminum Alloy, UV Stabilized Plastic
Mount Material Metal
Mount 60G Precision Alignment Pole Mount (Included)
Wind Loading 64 N at 200 km/h (14.39 lbf at 125 mph)
Weatherproong IPX6
Processor Quad-Core ARM® Cortex® A72 at 1.6 GHz
Memory 2 GB DDR4
Networking Interfaces (1) 10/100/1000 Mbps RJ45 Ethernet
(1)1/10 Gbps SFP+
Button Factory Reset
RF Connections Internal
Max. Power Consumption 29.31W
Power Method Passive PoE (Pairs 4, 5+; 7, 8-)
Power Supply 48VDC, 0.65A Gigabit PoE Adapter (Included)
Supported Voltage Range 48VDC ± 10%
ESD/EMP Protection Air/Contact: ± 24kV
Operating Temperature -40to 55° C (-40to 131° F)
Operating Humidity 5 to 95% Noncondensing
Certications FCC, IC, CE
Power Flashing White: Bootup in Progress
White: Not Connected to UISP™Controller
Blue: Connected toUISP Controller
Ethernet Flashing Blue:Ethernet Activity
GPS Blue: Receiving at Least (4) GPS Satellite Signals
60G Blue: Active Connection
airFiber 60 HD
High-Performance, 60Ghz radio delivering superior throughput in mid-range bridge deployments.
The AF60-HD is a 60Ghz radio providing superior performance in mid-range bridge applications. Designed to be
used in links ranging up to 1.5km, the AF60-HD delivers incredible throughput with very low interference and
latency on the 60Ghz spectrum. Housed in a compact and rugged form-factor design, it comes equipped with
integrated GPS and a Bluetooth management radio for easy setup, conguration, and monitoring. The AF60-HD
delivers unbeatable price-to-performance for ISP operators.

Specific ations are s ubject to c hange. U biquiti products are s old w ith a limited warranty desc ribed at: ww w.ui.c om/support/w arranty
©2020 Ubiquiti Inc . All rights res er ved. Ubiquiti, U biquiti Network s , the Ubiquiti U logo, airFiber, airOS, and U ISP are trademarks or registered trademarks of Ubiquiti Inc . in the United States and in other
countries . All other trademark s are the property of their respective owners .
System
Software
RF
Maximum Throughput 3.8 Gbps
Maximum Range 1.5 km
Encryption WPA2-PSK (AES)
Uplink/Downlink Ratio 50/50
OS airOS®
Modes PtP Only
Services UISP, Ping Watchdog, Web Server, SSH Server, NTP Client, System Log,Device Discovery
Utilities Beamform Info, Discovery Utility, Ping, Trace Route, Speed Test
Network Bridge Mode
Wireless Settings GPS Sync
Management interface Bluetooth management for easy setup over UISP App
WEB UI
Minimum Software Requirements Modern WebBrowser or Android/iOS Smartphone
Technology Wave
Operating Frequency* 57 to 66 GHz
* Depends on regulatory region.
GPS Yes
Channel Bandwidth 2160MHz
Operating Channels 58320, 60480, 62640, 64800MHz
Beamwidth HPOL: NaN (The Antenna is Only Vertically Polarized)
VPOL: 3°
Elevation: 3°
Electrical Downtilt 0°

Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 60cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not
available to all US model. Per FCC regulation, all WiFi product marketed in
US must fixed to US operation channels only.
Professional installation instruction
1. Installation personal
This product is designed for specific application and needs to be
installed by a qualified personal who has RF and related rule
knowledge. The general user shall not attempt to install or change the
setting.
2. Installation location
The product shall be installed at a location where the radiating
antenna can be kept 60cm from nearby person in normal operation
condition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The
non-approved antenna(s) may produce unwanted spurious or excessive
RF transmitting power which may lead to the violation of FCC/IC limit
and is prohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the
final output power does not exceed the limit set force in relevant rules.
The violation of the rule could lead to serious federal penalty.

ISED Canada
CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
The device for operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN
ICES-3(A)/NMB-3(A)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques
de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. RF
Exposure Warning
The antennas used for this transmitter must be installed to provide a separation distance of
at least 60(FCC/IC) cm from all persons and must not be located or operating in con junction
with any other antenna or transmitter.
Les antennes utilisées pour ce transmetteur doivent être installé en considérant une dis tance
de séparation de toute personnes d’aumoins 60(FCC/IC) cm et ne doivent pas être localisé ou
utilisé en conflit avec tout autre antenne ou transmetteur.