PURE Move R3 User manual

Move R3

Introduction
Thank you for choosing the MoveR3. This user
manual will get you up and running in no time.
If you need more help, visit support.pure.com.
1

Safety
Befo re you use your Move R3 ,re ad the following safety instructions.
1. Read all the safety informationand instructions before using the product. Whenpassing this product to someone,
include all documents.
2. If you do no t follow the operating instructions p rovided, it maycompromise the safety of your product and this may
invalidate the warranty.
3. Do not expose the product to dripping or splashing.Do not place objects fille d withliquids,suchas vases, onthe
product.
If liq uid or water spills onto the p roduct,sw itchit off immed iately and contact your deale r.
If you are using a mains-powered adapte r,do not touchthe product withwet hands.
4. T he internalb attery inthis product is no t use r rep lace ab le. Do not e xpose the battery to e xcessive heat or naked
flames. Ensure ade quate ventilationand airflow around the product,p articuarly when charging. Dispose o f the
product inaccordance withlocalenvironmental rules.
5. Using the product inrooms o r climates w ith high humidity and te mperatures may cause condensation to fo rm inside
the product, whichcandamage the product.Use the product inmoderate climates only.
6. Do not use your product in extremelyhot or cold temperature. Keep the de vice away from heat sources, suchas
radiators o r gas/electric fires. Do not exp ose your product to naked flame s,such as lighted candles.
7. To charge your product,only connect it to asupplyso urce that meets the safety isolationrequirements of
EN60065 or E N60950-1 fo r an accessible safety e xtralow voltage circuit. For this conne ction,use e ithe r the
supp lied micro-USB cable o r asuitably CE ap proved powe r adapter withthe correct USBoutput rating.
8. Powe r the p roduct using ane xternal 5 V DC 1 A powe r sup ply. The maximum outp ut current is 1 A,p rote cted b y an
internalcircuit.
9. Before you charge your product,e nsure that the available sup ply voltage corresponds withthe required
operational voltage of the product.
10. Disconnect your product from the charging p ower supply if you will not use your product for a lo ng period of time
(fo r example, if you are g oing onholiday).
11. Always unplug your product from the charging power supplybe fore cleaning. When cleaning the product, do not
use any type of abrasive pad or abrasive cleaning solutions as these may damage the product's surface.
12. To re duce the risk of electricshock,d o not remove any screws. The product doe s not containany user-se rviceable
parts inside .Product repairs should only be carried out by autho rised p ersonne l.
2

To prevent possible hearing damage,do not listen at highvolume le vels for long periods of time.Consistent
e xposure to high volume s w he nusing headp ho ne s can damage yo ur he aring . Always che ck the vo lume level
before you inse rt he adphone s into your ears.Use of headphone s other thanthose supplied by Pure may
expose youto he aring damage, as the high level volume warning onthe de vice maybe inaccurate .Use of
he adphones while operating a vehicle is not recommende d and is illegalinsome areas.If youfind that listening
to your Move is distracting w hile operating any type o f vehicle or pe rfo rming anactivity that req uires your full
atte ntion,stop liste ning to your Move.
User:T he battery is not user serviceable. Do not atte mpt to replace the inte rnalb attery inthe pro duct.
Se rvice Pe rsonne lonly:Danger of explosion if b atte ry is incorrectly replaced. Replace only withthe same or equivale nt
type.
Riskof injury whe ncharging the product in direct sunlight.Only charge the product whe nit is not indirect sunlight.
Ensure ade quate ventilationand airflow around the product, particularly when charging.
Cease to use the device if there are any abnormalities during operation,suchas high temperature, discoloration,
bulging,le akage,and so on.
Symbols on the product and in the user manual
Potentially serious risk to your personal safety.To avoid possible injury or death,obey all safety notices withthis
symbol.
Caution. Read the user manualbe fore use.
Caution. Avoid listening at highvolume le vels for long periods of time.
5V DC 1A
5V DC 1A po we r sup ply.
Where to sw itcho nthe pro duct or put it instandby.
3

4
Introduction 1
Safety 2
Contents 4
Overview 5
What's in the box 5
Controls 6
Connections 7
Displ ay 8
Getting started 9
Chargi ng your Move 9
Switching on for the first time 9
Locking and unlocki ng your Move 10
Digital radio 12
Listeni ng to di gi tal radio 12
Changing the radio station 12
Performi ng an autotune 12
FM radio 13
Listeni ng to FMradio 13
Changing the radio station 13
Changing search settings for radi o
stations 13
Changing between stereo and mono
reception 14
Presets 15
Storing presets to preset1 or2 15
Storing presets to the preset list 15
Listeni ng to presets 16
Timers 17
Setting a sleep timer 17
Settings 18
Clock settings 18
Displ ay settings 19
Changing the audio settings 20
Changing the language 21
Resetting to factory setti ngs 21
Updating the software 21
Performi ng a battery reset 22
Specifications 23
Contents

Overview
What's in the box
2 3
1
1Move R3 3Micro-USB cable (for power only)
2Headphones
5

Controls
1 Volume Press to change the volume.
2 Back Press to go back to the previous menu.
3 Menu Press to open the main menu.
6

4 Previous Press to choose the previous radio station or menu option.
5 Select Press to select a radio station or menu option.
6 Next Press to choose the next radio station or menu option.
7 Presets Press to listen to your presets. Press and hold to store the current radio
station to a preset.
8 Power/Lock Slide to the position to lock the buttons. Slide to the middle position to
unlock the buttons.
Slide to the position to switch on your Move. Slide to the position and
hold to switch off your Move.
Connections
2
1
13.5mm headphone socket
2Micro-USB socket
7

Display
13
4
2
1Sleep timer active 3Battery level
2Current time 4Text area
8

Getting started
Before using your Move, read the safety information on page2.
Charging your Move
1. Connect the micro-USB cable to the micro-USB port on your Move.
2. Connect the other end of the micro-USB cable to a power outlet, using a USB
power adapter. You can also charge the battery by connecting your Move to
a computer's USB port.
The icon on the display shows the battery charging.
Switching on for the first time
Before you switch on your Move for the first time, charge the battery for at least
3hours.
9

1. Connect the headphones into the headphone socket on your Move.
The headphones are also the aerial for your Move.
2. Slide the Power/Lock switch into the position, then release the switch.
Your Move switches on and starts tuning to digital radio stations. After the
autotune is complete, you can start listening to digital radio.
Locking and unlocking your Move
You can lock the buttons on your Move, so you don't accidentally press a button.
When your Move is switched off, lock the buttons so you don't accidentally
switch it on.
10

1. To lock the buttons on your Move, slide the Power/Lock switch into the
position.
2. To unlock the buttons on your Move, slide the Power/Lock switch into the
middle position.
11

Digital radio
Listening to digital radio
When you are listening to FMradio, you can change to digital radio.
1. Press Menu.
2. Press and Select to choose Digital radio.
Changing the radio station
1. Press or to browse the available radio stations.
2. Press Select to choose a radio station.
Performing an autotune
When you first switch on your Move, it automatically searches for radio stations. To
search for digital radio stations again, perform an autotune.
1. Press Menu.
2. Press and Select to choose Autotune.
12

FM radio
Listening to FMradio
When you are listening to digitalradio, you can change to FMradio.
1. Press Menu.
2. Press and Select to choose FM radio.
Changing the radio station
lTo move to the previous or next radio station, press and hold or .
lTo tune to a specific radio station frequency, press or to increase or
decrease the frequency. The frequency steps up or down by 0.05MHz.
Changing search settings for radio stations
When you press and hold to change radio stations, you can include all radio
stations or only include radio stations with a strong signal.
1. Press Menu.
2. Press and Select to choose Scan setting.
3. Press and Select to choose Strong stations only or All stations.
13

Changing between stereo and mono reception
By default, your Move uses stereo reception for FMradio. If radio stations have a
weak signal, mono reception may improve the signal strength.
1. Press Menu.
2. Press and Select to choose Stereo.
3. Press and Select to choose FM stereo or Mono.
14

Presets
You can store your favourite radio stations as presets.
On the front of your Move, there are three preset buttons. Use 1or 2for quick
access to your favourite radio stations. Use 3+ to open a list of all your presets.
You can save up to 10 digital radio stations and up to 10 FM radio stations in the
presets list.
Storing presets to preset1 or2
1. Tune to the radio station you want to store.
2. Press and hold 1or 2until Preset stored is displayed.
If there is already a radio station saved to the preset you’ve selected, the
new station replaces it.
Storing presets to the preset list
1. Tune to the radio station you want to store.
2. Press and hold 3+ until the preset list is displayed.
3. Press and Select to choose a preset number.
If there is already a radio station saved to the preset you’ve selected, the
new station replaces it.
15

Listening to presets
lTo listen to preset1 or2, press1or2.
lTo listen to any preset, press3+ to open the preset list. Press and Select to
choose a preset number.
16

Timers
Setting a sleep timer
The sleep timer switches off your Move after a set amount of time.
1. Press Menu.
2. Press and Select to choose Sleep timer.
3. Press and Select to choose the duration of the timer.
is shown on the display and the timer starts counting down.
To cancel the sleep timer, enter the Sleep timer menu and choose Sleep off.
17

Settings
The current value for most settings is indicated on the display by an asterisk(*).
Clock settings
Setting the time and date
1. Press Menu.
2. Press and Select to choose Clock> Set time/date.
3. Press and Select to set the time and then the date.
Changing the time or date format
1. Press Menu.
2. Press and Select to choose Clock.
3. Choose whether to change the time format or date format.
lTo change the time format, press and Select to choose Set 12/24
hour.
lTo change the date format, press and Select to choose Set date
format.
4. Press and Select to choose a format.
18