Airofog Gel Gun User manual

1
(1) (2)
(3) (4)
(5)
18
19
12
3
4
2 Gel Gun: V2018-04
Step 1 ~ 5
dial 1 to 5
Airofog Gel Gun is designed by the theory of negative pressure. Gel bait is
sucked out through the gun instead of being pushed out in the traditional way
by a plunger, ensures an accurate amount of each bait placement and avoids
an overflow of gel bait. By adjusting the wheel regulator, 5 different doses can
be selected to meet a variety of demand. Adapts to most 30g/35g gel cartridges.
Safety
●Keep out of reach of children.
●Never inject the metal tip/needle of the gun into electric outlets.
●Not to touch the exposed cables or electric outlets with the gun’s metal part
especially in the thunder weather.
●Follow the manufacturer’s instruction for the safety of gel cartridge.
Getting Started
Step 1: Remove the closure (18) and place a stainless steel or plastic needle
(19).
Step 2: Remove the tip cover of gel cartridge, then insert the cartridge into the
gun compartment by pushing it against the piston (12) until the base of
cartridge is seated well on the top hook of the trigger (3).
Step 3: Adjust the regulator (4) to position 5. Push the gel bait plunger gently
from the base of the cartridge to drive the gel to the outlet, then press
repeatedly the trigger until the gel comes out.
Step 4: Now the gun is ready for application.
Step 5: Dial the regulator to the position from 1 to 5 to get the desired dose.

1
(1) (2)
(3) (4)
(5)
18
19
12
3
4
2 Gel Gun: V2018-04
Step 1 ~ 5
dial 1 to 5
Airofog Gel Gun is designed by the theory of negative pressure. Gel bait is
sucked out through the gun instead of being pushed out in the traditional way
by a plunger, ensures an accurate amount of each bait placement and avoids
an overflow of gel bait. By adjusting the wheel regulator, 5 different doses can
be selected to meet a variety of demand. Adapts to most 30g/35g gel cartridges.
Safety
●Keep out of reach of children.
●Never inject the metal tip/needle of the gun into electric outlets.
●Not to touch the exposed cables or electric outlets with the gun’s metal part
especially in the thunder weather.
●Follow the manufacturer’s instruction for the safety of gel cartridge.
Getting Started
Step 1: Remove the closure (18) and place a stainless steel or plastic needle
(19).
Step 2: Remove the tip cover of gel cartridge, then insert the cartridge into the
gun compartment by pushing it against the piston (12) until the base of
cartridge is seated well on the top hook of the trigger (3).
Step 3: Adjust the regulator (4) to position 5. Push the gel bait plunger gently
from the base of the cartridge to drive the gel to the outlet, then press
repeatedly the trigger until the gel comes out.
Step 4: Now the gun is ready for application.
Step 5: Dial the regulator to the position from 1 to 5 to get the desired dose.

34 Gel Gun: V2018-04
Care and Maintenance
1. As the drying of gel could block the flow for the next use, always leave the gel
cartridge inside the compartment after each use or even when the gel is used
up but a new cartridge is not replaced yet.
2. Maintenance is not necessary as long as the drying of gel does not happen.
3. The only care to be required is cleaning. All the parts of gun can be socked
and washed in the warm water with detergent.
4. When there is air bubble in the gel cartridge, it may occur that no gel comes
out even pulling trigger several times. In this case, just push forward the
cartridge from the base by 2 thumbs and repeat this movement, the air bubble
will be driven out and regular flow continues. Plunger can do the same job of
expelling the air bubble out of the cartridge.
Guarantee
AIROFOG MACHINERY CO., LTD. (called AIROFOG) guarantees Airofog Gel
Gun to be free of defects in materials or workmanship to the original purchaser
for a period of one (1) year, on labour and parts which are not subject to usual
wear.
During this period, AIROFOG will replace and/or repair the parts with material
and/or manufacturing faults (on the exclusive judgement of our technical
department) free of charge.
The despatch and return expenses will be borne by the customer.
The guarantee does not cover any damage occurred during transport or by
incorrect handling, tempering, improper use, the use of non-recommended
products and so on.
Under no circumstances will AIROFOG be liable for damages due to improper
use or application. Under no circumstances will AIROFOG be responsible for
damages done to any property or persons.
After using
●Take off the needle (19) from the gun, screw back the closure (18) to the gun
to prevent the drying of gel at the output.
●Dial the regulator to “0” position to avoid trigger pressing by accident.
●Leave the gel cartridge into the gun compartment to prevent the gel left inside
the gun from drying then blocking the piston and other gun parts.
●If necessary, clean the used needles with the cleaning rod.
●Put the gun and parts back into the provided pouch .
Attention
Dosage performance varies depending on viscosity and density of the gel used.
Airofog Gel Gun provides 2 types of wheel regulator - smaller dosage (red) and
bigger dosage (black) with a remark of “B” on the wheel. It is recommended to
do a test prior to parameterize adjustment.
Airofog Gel Gun is only for gel bait, not for application of high viscosity pastes.
Dosage reference
regulator mark red (smal) black (big)
1 0.017g 0.05g
2 0.033g 0.1g
3 0.05g 0.15g
4 0.067g 0.17g
5 0.083g 0.19g
!
dial to “0”
18
19