AirPlus MD03 User manual

TWS Bluetooth Earphones with LED
Charging Case MD03

Specifications:
- Model: MD03
- Bluetooth version: 5.0
- Bluetooth protocol: HFP / A2DP / HSP / AVRCP
- Waterproof Standard: IPX4
- Noise reduction version: CVC8.0
- Charging box battery capacity: 450mAh
- Individual earphone battery capacity: 50mAh
- Power display: LED digital display
- Transmission distance: Within 10 meters
- Headphone standby time: about 300 hours
- Single earphone net weight: about 7.6g
Before the first use:
Select the earcaps that fit your ear, put them on the earbuds, and put them back into the
charging case. It’s recommended that you charge the earbuds and charging case
before the first use, or if you haven’t used it for a long time.
Power on/off:
The earphones will be automatically turned off when you place them in the charging
box. When you take them out they will turn on. When out of the charging case, long
press the earphone for five seconds to turn them off, then if you want to turn them on,
long press for five seconds.
Pairing:
Take out the earbuds from the charging case. They will turn on and pair with each other
automatically. To pair them with your phone, turn on the Bluetooth on your device and
search for available devices, and tap on the RD01-TWS/RD01-V5.0/MD02 to connect.
When using the earbuds again, they will automatically pair with the latest used device
after power on.
Button controls:
- Play/Pause: Press the MFB button
- Next song: Press and hold MFB on the right earphone
- Previous song: Press and hold MFB on the left earphone
- Volume down: Double press the MFB on the right earphone
- Volume up: Double press the MFB on the left earphone
- Answer/End call: Press the MFB button
- Refuse call: Press and hold for 3 seconds the MFB
- MFB triple click: Activate Siri