AIRPULSE P100X User manual

Acve Speaker
P100X
User manual
Printed in China
Dongguan Platinum Audio Systems Co., LTD
OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / IN PUT
No. 2 East Industry Road, Songshan Lake Naonal High-tech
Industrial Development Zone, Dongguan 523808 China
www.airpulseaudio.com

1 2
Please read the following contents carefully before turning on your equipment; and follow the
instrucons below.
Keep this informaon around for future reference.
1. Please read the instrucons carefully. Keep it in safe place for future reference
2. Heed all warnings.
3. Follow all instrucons.
4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
5. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
6. Protect the power cord from being walked on or pinched parcularly at plugs, convenience
receptacles, and the point where they exit from the speaker.
7. Only use aachments/accessories specified by the manufacturer.
8. Unplug this speaker during lightning storms or when unused for long periods of me.
9. Before connecng speakers to power source, please turn off the power switch and make sure
the volume is set at minimum level.
10. Please do not place power cable and signal cable near heat source (such as electric heater
and radiator).
Do not leave cables where they can easily be stepped on or compressed.
11. Use electric outlets that allow power cable be pulled out easily. When speakers are not being
used for an extended period of me, please turn off power switch and disconnect power plug.
12. In order to avoid damage from thunder and lightning, turn off power switch and disconnect
speaker from power source during a rain storm.
13. Please do not drag power cable when disconnecng from wall socket. Hold power cord firmly
at the top to unplug from the wall socket.
14. Use the speakers only within voltage specificaons. Using the speakers with voltage higher than
specificaons is dangerous and can cause equipment damage, fire damage or bodily injury.
15. These speakers do not include any self serviceable parts. Do not aempt to open the speaker
to uninstall any parts or do any type of modificaons. If problems occur during use please
contact professional technicians only for repair.
16. Please refer to the trouble shoong secon in owner’s manual for common operaon errors
and to determine possible malfuncon.
17. Please do not place speakers in places where they can be easily hit by falling objects or dropping
and splashing liquid. Do not place any lit fire (such as candle) on top of speaker as this may
lead to fire hazard.
Do not place any liquid containers on top of speaker as this may fall on speakers and causing
electric shock and damage to speaker.
18. Place speakers in a stable posion so they will not easily fall off causing damage and injury.
19. Place speakers in a well venlated and dry posion, far from direct sunlight, heat source,
vibraon, dust, moist or extremely cold condion. For opmal performance, please leave at
least 20 cm distance space around the speaker.
20. Please do not use speaker at maximum volume for an extended period of me, This may cause
damage to your hearing.
21. Before moving the speakers, please first turn off power switch and disconnect from power
source.
22. When the following symptoms occur, please turn off power switch and disconnect from
power source:
‒ Power cable or plug is worn or damaged.
‒ Abnormal odor or smoke is detected.
‒ Small objects falling inside the speaker.
‒ Sudden break off while playing music.
Consult a professional repair technician to diagnose and repair the speaker.
23. Do not use chemical solvent to clean the surface of speaker. To avoid surface damage, use
a clean and so cloth only.
24. Do not use the speakers in proximity closer than 22 cm to individuals wearing cardiac pacemaker
or defibrillator.
Warning:
1. Use the same type of baery only to replace baery in remote control.
2. Never disassemble, smash, or compress baery inside remote control; or toss it into a fire.
3. Please stop using the remote control if it has the appearance of bulging, leaking, discoloring
or any other abnormal symptoms. Improper use of baery can cause explosion or leaking
which leads to burn or other bodily injury. Please dispose baery by referring to local legislaon.
Excessively loud music may lead to hearing loss. Please keep the volume in a safe range.
Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To return your used device,
please use the return and collecon systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the speakers. When a cart is used, use cauon when moving the cart/speakers combinaon to
avoid injury from p-over.
Power warning:
1. Place the product near the power outlet for easy use.
2. Before use, make sure that the operang voltage is the same as your local power supply. Correct
operang voltage can be found on the product plate.
3. For safety purpose, unplug the product during lightning storms or when unused for extended
periods of me.
4. Under normal condions, the power supply may get hot. Please keep good venlaon in the area and
exercise cauon.
5. Safety warning labels on the housing or boom of the product or power adaptor.
This symbol is to alert the user to the presence of un-insulated dangerous voltage within
the product's enclosure that may be of sufficient magnitude to constute a risk of electric
shock to persons.
This symbol is to warn the user not to disassemble the enclosure of the product and
there is no user-replaceable part inside. Take the product to an authorized service center for
repair.
This symbol indicates that the product is for indoor use only.
For wireless product:
1. Wireless product may generate shortwave radio frequencies and interfere with the normal
use of other electronic devices or medical equipment.
2. Turn off the product when it’s disallowed. Do not use the product in medical facilies, on
airplane, at gas staons, near automac gates, automac fire alarm system or other automated
devices.
3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves
may affect the normal operaon of the pacemaker or other medical devices.
This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth
requirement.
The MAINS plug is used as the disconnect device, the disconnect device shall remain readily
operable.
Important safety instrucon Important safety instrucon

3 4
FCC Statement
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operaon.
Any Changes or modificaons not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucons, may cause harmful interference to radio
communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
FCC ID:Z9G-EDF126
Important safety instrucon
IC Cauon
The device meets the exempon from the roune evaluaon limits in secon 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian informaon on RF exposure
and compliance.
This device contains licence-exempt transmier(s)/receiver(s) that comply with Innovaon, Science
and Economic Development Canada’s licence-exempt RSS(s). Operaon is subject to the following
two condions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operaon of the device.
This equipment should be installed and operated with a minumum distance of 20 cm between
the radiator and your body.
Le disposif rencontre l'exempon des limites courantes d'évaluaon dans la secon 2.5 de RSS102
et la conformité à l'exposon de RSS-102 rf, ulisateurs peut obtenir l'informaon canadienne sur
l'exposion et la conformité de rf.
L’émeeur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovaon, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitaon est autorisée aux deux
condions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionne.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur
et votre corps.
IC:10004A-EDF126
Catalog
Box Contents
Speaker Illustraon
Remote Control Illustraon
Installing Baery in Remote Control
Preparaons
Connect to power source
Speaker placement
Playback instrucon
Connect to playback devices
Playing
Specificaons/statement
Troubleshoong
5
6
7
8
9
9
9
10
10
11
12
13

56
Speaker illustraon
RL
OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / INPU T
User manual
Remote control
RCA audio cable
Power cable
Speaker
OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / INP UT
3.5mm-RCA audio cable
Note: Images are for illustrave purposes only and may differ from the actual product.
Box contents
①Power switch
Turn on/off speaker power
Turn on: rotate the switch right and release unl
you hear prompt tone along with the orange light
around the switch lighng up (please note the
light will be lit in 1 second aer the prompt tone
rings);
Turn off: rotate the switch le and release unl
you hear prompt tone along with the orange light
around the switch turning off.
(Note: Turning off the power switch will only turn
the amplifier off, and power source is sll
available. To thoroughly turn the speaker off,
please unplug the power cable from the mains
socket.)
②BASS: Bass dial
Increase or decrease low frequencies within the
range of +/-3dB,
and sasfy different listening preferences or
match various surroundings.
③TREBLE: Treble dial
Increase or decrease high frequencies within the
range of +/-3dB,
and obtain different mbre through adjustment.
④VOLUME/INPUT: Volume control/input
selecon
Rotate: adjust volume level;
Press: switch input mode (type),
Indicate the current input mode in terms of the
input mode indicator.
⑤Input mode indicator
Indicate the current input mode (type),
Orange light steady lit: Line In input mode
Blue light steady lit: Bluetooth input mode
Note: For inial pairing, the blue light will flash
when Bluetooth input is selected, aer pairing is
successful, the blue light will be steady lit.
⑥LINE IN: Line In input port
Connect to playback devices using RCA audio
cable.
⑦Power cable connector
Connect to plug of power cable.

OFF ON
+3dB
BASS
+3dB
TREBLE VOLUME / INPUT
* When playing music in Bluetooth mode and switching to other modes, Bluetooth connecon
will automacally return if selecng Bluetooth mode again.
Mute off speaker output
⑧
How to operate the remote control
30 30
Infrared emission window
USB
OPT
PC
AUX
Remote control illustraon
78
Standby buon
Mute
Play/pause
Previous/
next track
Line In input
Bluetooth input (Bluetooth)
⑥
Volume control buons
①
Volume up/down Adjust playing volume
Playback selecon buons
Audio source selecon buons
⑦
Play/pause in Bluetooth input
Previous/next track in
Bluetooth input
Standby/power on
②
③
④
⑤
LINE
Aim the remote control at the remote control
receiving window on the speaker.
When the system receives remote control
commands, the indicator will alert color or flash.
Note:
1.The baery life is normally about 6 months; please replace it when the remote control is
not sensive or the control distance to be shortened.
2.Remove the baery immediately when exhausted to avoid explosion or acid leaks.
3.Discard the baery immediately in the event of baery leakage, paying aenon not to
touch the leaking materials.
If leaking is in contact with skin or gets in eyes/mouth, rinse immediately and seek emergen-
cy treatment immediately. Please clean the baery compartment thoroughly prior to
installing new baery.
4.Never use the remote control in condions below:
– Places with high humidity, e.g. a bathroom
– Places with high temperature, e.g. near a heater or stove
– Places with extremely low temperature
– In dusty places
5.Remove the baery when unused for a long period of me to avoid baery leakage.
6.Do not use this product when baery compartment is not securely closed, and keep the
remote control away from children.
7.There is a cell baery inside this product, if swallowed it will cause serious bodily injury;
possibly death in 2 hours. Never let children touch the baery.
8.If the baery is accidentally swallowed, rush to hospital immediately.
1.Insert a coin into the slot and rotate
counter-clockwise to open the baery
compartment.
2.Install the new baery, close baery
compartment and rotate the cover
clockwise to close the compartment.
Open Close
Installing baery in remote control

RL
RL
Connect to playback devices
Connect to power source
Speaker placement
109
AIRPULSE P100X
Bluetooth
Preparaons Playback instrucon
CD player/music player
/audio decoder, etc.
PC or Mac
CD player
RCA audio cable
2.Bluetooth input: Please switch to Bluetooth input mode, and set your Bluetooth device to search
for and connect to "AIRPULSE P100".
Note:
1.The baery life is normally about 6 months; please replace it when the remote control is
not sensive or the control distance to be shortened.
2.Remove the baery immediately when exhausted to avoid explosion or acid leaks.
3.Discard the baery immediately in the event of baery leakage, paying aenon not to
touch the leaking materials.
If leaking is in contact with skin or gets in eyes/mouth, rinse immediately and seek emergen-
cy treatment immediately. Please clean the baery compartment thoroughly prior to
installing new baery.
4.Never use the remote control in condions below:
– Places with high humidity, e.g. a bathroom
– Places with high temperature, e.g. near a heater or stove
– Places with extremely low temperature
– In dusty places
5.Remove the baery when unused for a long period of me to avoid baery leakage.
6.Do not use this product when baery compartment is not securely closed, and keep the
remote control away from children.
7.There is a cell baery inside this product, if swallowed it will cause serious bodily injury;
possibly death in 2 hours. Never let children touch the baery.
8.If the baery is accidentally swallowed, rush to hospital immediately.
* Connect the power cable included to power input port on the rear panel, and then insert
power plug into the mains socket on the ground or on the wall.
* Refer to the "Power switch" on page 6 to turn on/off the speaker, and press the " "
buon on the remote control to switch to Standby/Power on state.
(Note: Turning off the power switch will only turn the amplifier off, and power source is sll
available. To thoroughly turn the speaker off, please unplug the power cable from the mains
socket.)
* Place the speaker on a solid, leveled and steady surface.
* The speaker with compact and delicate look can be easily carried around. It can also be
placed on desktop, in bedroom, in living room, or at any other indoor corners. Make your
room full of vitality.
1.Line in input: Insert the RCA audio cable included into the "LINE IN" port on the speaker; then connect
the RCA audio cable to your playback device.
Note:
* Pin code for connecon is "0000" if needed.
* For inial pairing, the blue light will flash, and will be steady lit aer pairing is successful. If
the blue light flashes in a breathing paern, it means the pairing failed, please pair again.
Operaons may be different among different devices, please refer to the operaonal instruc-
ons aached with the devices.
* Effecve Bluetooth connecon distance is within 10 meters.
* The Bluetooth of P100X can only be searched and connected in Bluetooth input. The exisng
Bluetooth connecon will be disconnected once the speaker is switched to line in input. When
switched to Bluetooth input, the speaker will try to connect to the Bluetooth device connected
last me.
* To disconnect Bluetooth, press and hold the " " buon on the remote control for over 2
seconds, or press and hold the "VOLUME/INPUT" dial on the front panel of the speaker.
* To enjoy all Bluetooth funcons please ensure your audio device has A2DP(Advanced Audio
Distribuon Profile) and AVRCP(Audio Video Remote Control Profile) profiles.
* When connected to this product, Bluetooth connecvity and funcons may be different
among different Bluetooth devices, depending on soware sengs of Bluetooth devices.

Playing
11 12
Playback instrucon Specificaons/statement
1.For line in input, please ensure the orange light is lit; if not, please press the "VOLUME/IN-
PUT" dial to select line in input, then press the playing buon on your device to play music,
and adjust volume to a desired level with the "VOLUME/INPUT" dial.
2.For Bluetooth input, please ensure the blue light is lit and the speaker and Bluetooth device
are paired (if not, please follow the pairing method menoned above to complete pairing.),
then press the playing buon on your device or on music APP to play music, and adjust
volume to a desired level with the "VOLUME/INPUT" dial. In Bluetooth input mode, press the
" " / " " buon on the remote control to skip to previous/next track, and press the
" " buon to pause/play songs.
* It is recommended to set your player volume at a relavely high level, then use the volume
adjustment on the speaker to control the enre volume for opmum effect.
* Please set the speaker volume at the minimum level prior to playing.
Power Output: Treble: 10W+10W
Woofer: 40W
Frequency Range: 52Hz-40KHz
Input Mode: Line In, Bluetooth
Tweeter: Airblade Tweeter
Mid-Woofer: 4.5 inch Aluminum Cone Mid-Woofer (122mm)
Cabinet Size (WxHxD): 300 x 180 x 200mm
Net Weight: 5.1 Kg/Set
NOTICE: For the need of technical improvement and system upgrade, informaon
contained herein may be subject to change from me to me without prior noce.

Troubleshoong
No sound
•Check if the speaker is powered on.
•Try to turn up the volume using either the master volume control or remote control.
•Ensure the audio cables are firmly connected and the input is set correctly on the speaker.
•Check if there is a signal output from the audio source.
Cannot connect via Bluetooth
•Make sure the speaker is switched to Bluetooth input, in other audio input mode Bluetooth can
not be paired or connected. Disconnect from any Bluetooth device by press and hold the " "
buon in Bluetooth mode, and then try again.
•Effecve Bluetooth transmission range is 10 meters, please make sure operaon is within the
range.
•Try another Bluetooth device for connecon.
The P100X does not turn on
•Check if mains power is connected, or if the wall outlet is switched on.
Noise coming from speaker
•AIRPULSE speakers generate lile noise, while the background noise of some audio devices are
too high. Please unplug audio cables and turn the volume up, there should be no sound can be
heard at 1 meter away from this product.
•Move digital equipment or high-frequency equipment far away from this product.
If you want to find out more about AIRPULSE, please visit our website at www.airpulseaudio.com
13