airquee Bumper Ball User manual

Page 1of 3
BUMPER BALL
User manual
IMPORTANT
AS THE OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY
OUT YOUR OWN RISK ASSESSMENTS BEFORE ATTEMPTING TO USE THIS
PRODUCT.
1. Open up the package and spread the bumper ball on the ground. Leave the
bumper ball on the ground for 10-15 minutes to allow time for the material to
loosen up, afterwards it can be inflated.
2. Inflate the bumper ball to around 80-90%. If the bumper ball is over inflated
this may reduce the life of your bumper ball due to being used under too
much pressure and this will invalidate your Warranty.

Page 2of 3
3. Do not use your bumper ball on tarmac, cement, concrete or any other hard
surface
4. PLEASE USE the product on soft surfaces such as grass or astroturf.
5. While using the bumper ball, please do not carry anything unnecessary such
as: keys, telephone, glasses (spectacles or even sun glasses).

Page 3of 3
6. When using the bumper ball you have a fixed handle (fig1.) and adjustable
belt (fig2.) to ensure the user is safely secured.
Fig1. Fig 2.
7. After using the bumper ball please clean it with water. Afterwads wipe the
bumper ball with a cloth until dry. NEVER STORE A BUMPER BALL
WHILST WET
8. After you have cleaned the bumper ball, we recommend that you store it in its
protective bag.