AIUSEVO AS-320 User manual

Please read the manual carefully
before using the unit
AS-320
USER MANUAL

01
02
03-10
11
12-14
15
16
17
Safety Precautions
Product Overview
Operation Instruction
Cleaning and Maintenance
Troubleshooting
Important Safety Tips
Specifications
Product Warranty Information
*BEFORE FIRST USE*
To prevent any internal damage,
it is very important to keep refrigeration
units ( like this one) upright throughout
their journey.
Please leave it standing upright and
outside the box for 24 hours before
plugging it in.

SAFETY PRECAUTIONS
Thank you very much for choosing Aiusevo, wish our dehumidifiers could help to guarantee
the health of your whole family.
To operate the dehumidifier better and achieve the best effect, please read the manual
carefully before first use and keep it for future reference.
Please check if there is any damage around the machine, if the machine is damaged,
please contact customer service immediately.
IMPORTANT NOTICE FOR FIRST TIME USE:
Before cleaning the dehumidifier, turn off the power and unplug it from the power outlet.
Please do not place the machine near heat or flammable dangerous goods.
Do not insert your fingers or sticks into the air inlet or outlet.
Always keep the machine on even surfaces, avoid placing the machine on uneven or
sloping ground.
Do not spray water, insecticides, or flammable liquids on the unit.
This machine should not be placed in a confined and narrow space.
If the power cord is damaged, it must be repaired by the manufacturer or replaced by a
professional to avoid danger.
When using the dry clothes function, the clothes should be kept at least 15.7inches away
from the air outlet to prevent water from entering the machine and damaging the machine.
The machine power wiring must be in accordance with national wiring rules, and the power
line should be connected to the reliable external naught wire.
The fixed wiring of the machine connection must be equipped with an all-pole disconnect
device (air switch) with at least 0.118 inches contact opening distance.
Model specification of safety tube:3.15A
This dehumidifier is designed to operate with a working
environment between 41 ℉(5 ℃）and 95 ℉(35 ℃）.
When using the dehumidifier, other objects surrounding
the machine at least need to keep a distance of 7.9inches
(20cm). As the pictures show:
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge unless they have
been given supervision or instruction concerning the
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
01

Air lntlet
Power
Cord Buckle
Handle
Drain Hose
Outlet
Control Panel
Air Outlet
Lines of light
Water Tank
PRODUCT OVERVIEW
02

Humidity Setting
The humidity level can be set within the range of 30% RH to 80% RH in 5% increments.
-When the machine starts working, it will first automatically detect and show the room
humidity. In the dehumidification mode ( not settable under the other modes), press the
"Dehumidify" button to change the humidity selection, each time in 5% increments. The
number indicator "****" will keep flashing and show the set humidity. Once you have settled
the humidity you want, please stop operating and wait for 5 seconds, the number indicator
"****" will stop flashing and turn to show the actual room humidity instead.
-When the humidity level exceeds the set humidity, the dehumidifier will automatically stop
working, while the humidity level falls below the set humidity, it will automatically start
working again.
-When the humidity level is set at 30% RH, the dehumidifier will turn to work in the
continuous dehumidifying mode.
There is Clothes-Dryer Mode, Dehumidify Mode, Continuous Dehumidify Mode.
After the machine is turned on, press the [Mode] button to switch the working modes. Each
time pressing the button, the machine will cycle through the Clothes-Dryer mode, the
Dehumidifying mode, and the Continuous Dehumidifying mode.
Notices:
In the Clothes-Dryer Mode: Both the humidity and fan speed are not settable.
In the Dehumidify Mode: Both the humidity and fan speed are settable.
In the Continuous Dehumidify Mode: The fan speed is settable, while the humidity is not settable.
Time Setting
1. When the machine is turned on, the time setting is used for auto turn-off; When the
machine is turned off, the time setting is used for auto turn-on.
2. Press the "TIMER" button to select the timer, each time in 1-hour increments. You can
set the timer up to 24 hours. It will start to do the countdown when the setting is finished.
3. You can press and hold the "TIMER" button for seconds to make the setting faster.
4. If the time is set at 00, this is called the invalid time which means the time setting is
invalid. Once the time setting is succeeded, the light "o" will light up, and the led screen
will keep showing the setting time for seconds, then turn back to show the current room
humidity.
The time setting is used to set a time for the machine to automatically turn on or turn off.

LOOK
When the machine is turned on, press and hold the "LOCK" button for 2 seconds,
the control panel will be locked together with the other function buttons. To unlock
the control panel, press and hold the "LOCK" button again for 2 seconds.
The speed button is used to control the fan's speed, it can be switched to the high
-speed mode or low-speed mode. Notice: The high-speed mode will gain the
moisture removal effect, while the low-speed mode will be much quieter, please
choose your preferred speedmode accordingly.
1. Every time being turned on, the machine will automatically restore the working
state before being powered off last time.
2. If a power interruption occurs when the machine is turned on, it will restore
turned-on status after the power is recovered and keep the previous parameters
settings.
3. If a power interruption occurs when the machine is turned off, it will stay
turned-off statusafter the power is recovered..
When the water in the water tank reaches full, the machine will turn off automatically.
The indicator light will start flashing, and the buzzer will alarm for seconds.
After emptying the water from the water tank, the indicator light will turn off,
and the machine will start to work again.
State Light Display
Standby state: Blue Light
Turned-on state: Green Light
Water-full State: Yellow Light

2.Display Status Description
After the machine is settled up an electric circuit, the "POWER" button will light on which
means the machine is powered on and stays at the Standby (Power off) status.
Timer indicator " o": If the timer is set up properly, the indicator will turn on, when the timer is
not set up properly the indicator light will turn off.
The lighting button indicator "o": When using the light function the indicator will turn on, and
turn off if the function is not used.
High-speed indicator " ": If you set the machine to high-speed fan mode, the indicator will
turn on.
Low-speed indicator " ": If you set the machine to low-speed fan mode, the indicator will
turn on.
Clothes-Dryer indicator " ": When the Clothes-Dryer mode is selected, the indicator will
turn on, otherwise it will be off.
Dehumidify mode indicator" ": When the machine starts to dehumidify, the indicator will turn
on. When the room environment humidity reaches the set humidity, the indicator will start
flashing. Otherwise, it will be off.
Continuous dehumidification mode indicator " ": When the Continuous Dehumidification
mode is selected, the indicator will turn on, otherwise it will be off.
Water full light indicator " ": When the water tank is full of water, the indicator will start
flashing.
When the machine is alarming, the display panel will appear alarm error. (The alarm error and
humidity data will be flashing rotation.)
When the machine is working properly, the data " " on the display panel will be the humidity
value.
Auto Defrost Function
When the machine is running at a lower temperature, the system will automatically
determine whether there is a presence of frost. If the machine determines there is
a presence of frost, it will start to defrost automatically.
Defrost Action
The fan will run at the high-speed mode while the compressor will stop working.
Defrost Status Display
In the defrosting status, the power button "o" will keep flashing.value.
o
o
o
o
o

3.Instruction for Clothes-Dryer Mode
The dehumidifier can be used for drying clothes in rainy weather.
Step 1.
Hang the washed clothes in a small space such as a cloakroom, bathroom,
or storage room.
Notice: Keep the unit away from the water drip from the washed clothes.
Step 2.
Open the dehumidifier and set the humidity level at 30% RH. It is suggested to let
the air outlet of the dehumidifier blow air to the clothes directly.
1. The drying effect will vary from the thickness of clothes, the number of clothes,
and the size of the drying room. Theoretically, the effect will be better when
clothes are few, thin and the room is small.
2.The drying process would take 3 - 8 hours, thus, setting the machine to the
continuous drainage mode is more suggested when drying clothes.

4. Error&Protection Code
Fault phenomenon
The humidity always shows "25%RH" (there is a big difference from the actual humidity)
The humidity always shows "99%RH" (there is a big difference from the actual humidity)
Analysis of causes
The humidity sensor failure?
1. There is water on the surface of the humidity sensor?
2. The humidity sensor failure?
Processing Method
Set the humidity to 30%RH, if the dehumidifier can still continue to work, the
machine can be used normally.
Repair and replace the humidity sensor.
If the dehumidifier is not affected and can continue to work, the machine can be
used normally.
please let the dehumidifier keeps working for a period of time, after the water on
the surface of the humidity sensor is removed, it will return to work normally.
Repair and replace the humidity sensor.
Notice:
When an error happened, there will be an error code flashes on the display. If
there is more than one error, each error code will be displayed in turn, if there is
only one error, the error code and the current humidity value will be displayed
alternately.
07

5. Empty the Water Tank
08
There are two ways to remove collected water.
Use the water tank
When the water tank is already full, the Full Tank Alert indicator light will turn on,
the dehumidifier will automatically shut down until the tank has been emptied and
placed back in the unit.
Ways to Empty the Water Tank