AJ 406001 User manual

JP-3712CD
Version 1.0
Note: The owner and user MUST read and
understand these operating instructions
before using this product.
Operating Instructions
[406001] Deskside shredder

Parts and function
Keep body parts away from
moving parts
2 | ajproducts.com
Warning signs
Do not exceed the maximum capacity
of sheets per pass
Read and learn the warnings written in
this document
Avoid touching the document
feed opening with hands
Avoid hair touching the
document feed opening
Product is not intended for use
by children (product is not a toy)
Avoid clothing touching the
document feed opening
Keep aerosol products
away
Do not shred paper clips
1. Avoid touching exposed blades under Cross-cut shredder head.
2. The grounded socket outlet should be installed near the equipment
and be easily accessible.
3. This equipment is not suitable for use in locations where children
are likely to be present.
Card/CD entry
Paper entry
Power switch
Operation buttons
LED indicator lights
Window
Bin
Castor

1. 1.
3. 3.
5.
4.
2. 2.
.
.
1. 2. 3.
3 | ajproducts.com
Capabilities Maintenance
Operation
Will shred:
Paper, CD/DVD’s, credit cards
Will not shred:
Continuous forms, adhesive labels, transparencies,
newspaper, paper clips, cardboard, wet paper, laminates or
plastics other than noted above
Paper shred size:
Cross-cut ............................................................ 4x27mm
Maximum:
Sheets per pass ..................................................12 (70g)
Passes per day:..................................................... 50-100
Cards per pass............................................................... 1
Cards per day .............................................................. 50
Paper width .......................................................... 230mm
Duty cycle.................................................. 10-15 minutes
( Heavier paper, humidity or other than rated voltage
may reduce capacity)
Lubricate when or immediately, if:
- Capacity decreases
- The motor sounds different, or shredder stops running
It is forbidden to use flammable aerosol sprays.
Use soft cloth to clean the exterior of the shredder
from oil stains.
Note: Unplug the machine before cleaning.
FOR PAPER: FOR CREDIT CARD/CD:
Turn the Power switch ON.
Press button ”O”.
Green light will indicate that
the shredder is in standby
mode.
Turn the Power switch ON.
Press button ”O”.
Green light will indicate that
the shredder is in standby
mode.
After work, press ”O” to set
the machine in sleep mode.
The power light should be
turned off.
If you want to stop the
shredding process, press
the ”R” button for 2-3
seconds. The machine will
reverse automatically and
eject the paper.
Press ”F” to shred
remaining papers.
Feed paper into the entry,
the machine will start
shredding automatically.
Feed the card/CD into the
entry, the machine will start
shredding automatically.
After work, press ”O” to set
the machine in sleep mode.
The power light should be
turned off.
Apply oil to the
entry.
Repeatedly set to “F”
and ‘”O” , alternately
for 5-10 seconds.
Feed the paper into
the shredder.

1. 2. 3.
4 | ajproducts.com
Troubleshooting Recycling
Continuous operation beyond 10-15 minutes may
trigger cool down period for 30 minutes due to
overheat. Turn off the unit after use.
1. Paper jam
Symptom: Red indicator light
Solution:
2. Bin full
Symptom: The red indicator
lamp for symbol is on.
Check if the bin is full, seen
from the clear window.
Solution: Take out the bin
and empty it. Push the bin in
place.
The crossed-out wheelie bin symbol
indicates that the item must not be
disposed of with normal, unsorted
general waste. The item must be sent
to separate collection facilities for
recovery and recycling in accordance
with local waste disposal regulations.
By separating electronic equipment
and batteries from general waste, you
help reduce the volume of waste sent
to incineration or landfill and minimise
any potential negative effects on the
environment and human health.
The information in this document is subject to change
without notice.
Please visit our website for the latest version.
ajproducts.com
If the red indicator
lamp is lit, press ”R”
and reverse the paper
out.
Press ”F” and ”R”, the
machine will shred the
remaining papers.
Press ”O” to set the
machine into sleep
mode.