Akai APW10 User manual

1
AKAI
MANUAL DE UTILIZARE
Cititi cu atentie acest manual si pastrati-l pentru urmatoare consultari.

2
SEMNIFICATIA AFISAJELOR LCD
1. Indicator Timp/Frecventa
2. Indicator Bass (Frecvente Joase)
3. Indicator FM Stereo
4. Indicator intensitate semnal
5. Indicator functie timp alarama
6. Indicator timp pornire automata.
7. Indicator alimentare
8. Indicator timp oprire automata(sleep)
9. Semnul tasta blocare
10. Unitatea de frecventa SW(MHz)
11. Unitatea de frecventa MW(KHz)
12. Numarul adresei de salvare a frecventei postului.
13. Indicator banda SW
14. Indicator functie Snooze
15. Indicator frecventa MW
16. Indicator banda FM
17. Unitate frecventa FM(MHz)
FOLOSIREA SURSEI EXTERNE DE ALIMENTARE
1. Cuplati adaptorul (neinclus) la reteaua de 220V si porniti alimentatorul.
2. Conectati adaptorul (neinclus) la mufa aparatului .
3. Porniti radio
Nota:
1. La folosirea unei surse exterioare cu adaptor(neinclus) alimentarea de la baterii a aparatului va fi
decuplata.
2. Inainte de a folosi adaptoul verificati polaritatea suresei externe pentru a elimina defectarea
aparatului.Polaritatea sursei externe este aratata ca mai jos (minusul este in centru)
3. Tensiunea sursei externe poate fi selecata in domeniul 3V ~ 4,5 V.

3
4. Cand adaptorul nu este folosit ,va rugam opriti-l .La folosirea adaptorului o perioada mai mare de timp
este indicat sa scoateti bateriile.
INSTALAREA BATERIILOR
1. Deschideti compartimentul bateriilor de pe spatele aparatului.
2. Introduceti 2 baterii AA in compartiment respectand polaritatea.
3. Inchideti compartimentul bateriilor.
Daca nu se poate opri aparatul sau volumul este instabil in timpul receptiei ,bateriile sunt
descarcate.Reduceti volumul sau inlocuiti bateriile.
Pentru a preveni pierderea datelor salvate ,dupa oprirea aparatului inlocuiti imediat bateriile.
Inlocuirea bateriilor
1. In modul oprit ,inlocuiti bateriile cat mai repede cu putinta.
2. Inlocuiti bateriile in maxim un minut .In caz contrara programarile ceasului si a posturilor din memorie
se vor pierde.Timpul afisat va fi 0:00 si va trebui sa reprogramati aparatul.
3. Daca inlocuiti bateriile cu aparatul pornit se vor pierde toate datele din memorie.De aceea este indicat sa
inlocuiti bateriile cu aparatul oprit.
Sfaturi:
1. Nu amestecati bateriile noi cu cele vechi.
2. Saca nu folositi radio o perioada mare de timp scoate-ti bateriile pentru a evita curgerea si defectarea
aparatului.
INDICATORUL DE PUTERE
Indicatorul de putere este indicat in 3 segmente:
Baterii incarcate la maxim
Baterii incarcate la minim
Baterii descarcate, auto stingere dupa palpaire
Sfaturi:
1. In cazul in care semnul de baterie la minim este afisat ,chiar si la volum mic sau pe ceas ,trebuie
inlocuite bateriile pentru a preveni curgerea acestora.Daca aparatul se opreste automat dupa ce ati cautat
posturile ,inseamna ca bateriile au nivel foarte scazut si deci trebuie inlocuite.Cand radio se opreste
automat datorita bateriilor descarcate ,indicatorul de alimentare se stimge dar asta nu inseamna ca aveti
baterii normale.Starea bateriilor trebuie judecata dupa afisajul de putere cand radio este pornit.
2. Pentru a avea o folosire mai indelungata folositi baterii alkaline.
Corodarea.oxidarea ,curgerea bateriilor si oricare alta defectare graduala data de acid sau de acesta
natura va anula garantia.
VERIFICARI INAINTE DE FOLOSIRE.
1. Verificati Tasta Blocare.Cand semnul “ ” apare pe ecran dupa pornire ,inseamna ca radio este blocat
in acest mod.Toatae celelalte taste cu exceptia Tastei Blocare,Stergere,Volum, Comutator Domeniu
Lung/Scurt vor fi blocate si trebuie anulata tasta de blocare pentru alte operatii.
Sfat:
Cand aveti un radio AD-T506 este posibil ca ati atins din greseala comutatorul de pornire si veti decsrca
bateriile,sau ati atins alte taste in timp ce asculatati radio si astfel perturbati postul asculatat.

4
Pentru a preveni acest lucru se poate folosi comutatorul special de blocare radio care blocheaza tastele pentru a
pastra receptia postului.Apasarea mai lunga de 4 secunde a tastei “Input/Lock” poate bloca sau anula blocarea
tastelor.
2. Verificarea Comutatorului Domeniu Lung/Scurt .Daca nu sunteti aproape de emitatorul postului ,alegeti
Domeniu Lung al comutatorului pentru receptie mai buna.
REAGLAJUL CEASULUI
Aparatul este programat din fabrica in sistemul de ceas cu 24 ore .La pornire aparatul arata 0:00.Daca apasati
scurt tasta mod cu aparatul oprit se poate comuta afisajul de la la timp curent.Daca
apasati scurt tasta mod cu aparatul pornit ,se poate comuta timpul curent, timp , timp si
frecventa post.
REGLAJUL TIMPULUI
1. Comutati radio pe mod afisare. Daca radio este in mod pornit ,opriti radio pentru a putea intra in mod
afisaj.
2. La apasarea scurta a tastei Memory/Clock in mod oprit ,numarul oreleor va palpaii de 5
ori.Introduceti timpul dorit cu tastele numerice 0-9 in timp ce acesta palpaie sau apasatia tastele “+”
sau “_” pentru a creste sau reduce numarul. Apasati tasta Memory/Clock din nou si numarul
minutelor va palpaii de 5 ori. Introduceti numarul dorit cu tastele numerice 0~9 sau cu tastele “+”
sau “-“ pentru a creste sau descreste numarul.
Nota: Prin apasarea scurta a tastei Memory/Clock in timp ce ceasul palpaie se confirma intrarea,sau
intrarea va fi confirmata automat dupa ce ceasul a palpapiit de 5 ori.
PORNIREA/OPRIREA RADIOULUI
1. Porniti radio prin apasarea butonulu “Power Switch” si radio va intra in modul receptie pe postul
pe care a functionat inainte de oprire.Apasand din nou acelasi buton aparatul se opreste. Nu
apasati acest buton frecvent.Lasati cel putin 3 secunde intre doua intaervale de apasare.
2. Porniti aparatul cu Functia Time Auto Power-on(pornit). Prin apasarea scurta a tastei
Alarm/Snooze in modul oprit se poate porni timpul de functionare si radio va porni automat la
timpul programat pentru pornire.
Sfat: Pentru operarea selectarilor si anularea functiilor de pornire automata ,vedeti capitolul descries mai
departe in acest manual.
3. Functionarea Opririi Automate pe Sleep cu functia oprire automata dupa timp ,se poate programa
timpul de receptie radio prin alegerea domeniului intre 10 si 100 minute.Cand timpul de receptie
atinge timpul programat ,radio se opreste automat pentru a preveni functionarea un timp indelungat
dupa ce ati adormit si astfel sa consumati bateriile.
Pasi:
1Apasati tasta Sleep cu aparatul pornit si pe afisaj apare 100minute.Alegeti timpul de oprire in domeniul
10 ~ 100 minute ,de exemplu 90 minute.
2Daca nu mai apasati nici-o tasta timp de 4 secunde ecranul revine la afisajul frecventei radio si semnul
de timp sleep indica ca radioul este in mod oprire sleep si se va opri automat dupa 90 minute.
Sfat: Cu timpul functiei oprire automata sleep se poate fixa timpul de oprire sleep duap ce radioul porneste
automat.
ALEGEREA TONULUI.
Aparatul are posibilitatea de a alege dintre trei tonuri diferite.Selectarea adecvata a tonului va permite sa aveti
cel mai bun efect al receptiei.Tonul poate fi ales cu tasta conversie ton in modul pornit al radioului.Mono este
pentru receptia semnalelor slabe sau programelor lingvistice ale emitatoarelor FM cu o singura banda.Stereo
este pentru receptia semnalelor puternice a programelor muzicale sau a emitatoarelor FM stereo.Bass-ul este
tipul d e efect sonor pentru receptia posturilor stereo avnd afisat pe ecran in partea de sus a ecranului
si prin apasare scurta a tastei ton se poate alege modul stereo sau mono.Printr-o apasare mai lunga de 2 secunde

5
se poate selecta sau anula modul Bass si cand se alege Bass ,semnul “BASS” va fi afisat pe ecran.
Nota Speciala: Se poate sterge efectul sonor daca opriti Bass in timp ce ascultati la difuzoare.
ALEGEREA BANDEI
La pornirea radioului ,se poate selecta 5 banzi de programe radio incluzand FM1, FM2, MW, SW1,SW2 cu
tasta selectorului de benzi cu afisajul corespunzator pe ecran.
CAUTAREA POSTURILOR
1. Cautarea Manuala
Cautarea Manuala poate fi facuta prin numeroase apasari scurte pe tasta de cautare frecventa “+” sau “-“
regland receptia pana la obtinerea unui semnal radio satisfacator.
Sfat: Cautarea Manuala este decvata pentru posturile cu semnal slab.
2. Cautarea Automata
Cautarea automata porneste de la frecventa postului ascultat ca punct de plecare sus sau jos si se opreste
la receptia unui post cu semnal corespunzator.
Pasi:
1. Tineti apasat tasta cautare frecventa “+” sau “-“ pentru mai mult de 0.5 secunde si cand frecventa radio
afisata incepe sa se modifice eliberati tasta.
2. Cand radio receptioneaza un semnal clar ,cautarea automata se va opri si radio va receptiona postul gasit.
Nota;
-daca postul gasit nu este cel dorit, se pot repeta pasii de mai sus pana la obtinerea postului dorit.
-Daca mentineti apasata tasta de cautare in timpul cautarii,cautarea automata va sari toate posturile in
procesul de cautare.
-Daca apasati din nou tasta cautare in timpul cautarii,se poate opri cautarea.
Sfaturi: Cautarea automata este adecvata pentru cautarea posturilor cu semnal puternic.
-Pentru a localiza rapid posturile cu semnal slab se poate face un compromis intre cautarea automata si
cautarea manuala, prin cautarea rapida a posturilor cu semnal puternic mai intai si apoi facand acord fin
cu cautare manuala la posturile cu semnal slab.
-Daca viteza cu care se schimba digitii devine lenta pe ecran la cautarea automata,exista un post cu
semnal slab in acea zona si se poate cauta manual aceasta statie.
3. Functia Salvare Cautare Automata.
Porniti radioul ,alaegeti banda unde doriti sa cautati apasand scurt tasta banda si apoi apasati scurt tasta
auto si aparatul va incepe cautarea automata a frecventelor posturilor si salvarea lor in ordinea de la
frecventa cea mai joasa catre cea mai mare.Cautarea automata se opreste la cautarea si salvarea a 10
posturi sau la sfarsitul domeniului de frecventa si porneste redarea ultimelor posturi cautate si
salvate.Apasand scurt pe alte taste ca “Light(lumina”,Mode(Mod)”,”Tone” si “Alarm/Snooze” se va opri
si iesi din salvare cautare automata.
Nota: Procesul de cautare si salvare acopera posturile originale salvate in memorie.
4. Receptia si Memorarea Posturilor
Radio AD-TS06 poate avea memorie pentru 20 posturi FM ,60 posturi pentru pentru FM2,40 posturi
pentru MW, 30 posturi pentru SW1,50 posturi pentru SW2,toate fiind 200 posturi. Se pot da numere si
salva in memorie posturile favorite.Cand asculatati la radio ,se pot selecta adresele pentru a asculta
posturile slavate.
Nota:
- Apasati tasta Band pentru a selecta banda dorita.
- Apasati tastele numerice direct pentru a selecta una
din adresele numere de 0 la 9 a oricarui post salvat in
memorie.
5. Introducerea Frecventelor Posturilor
Daca stiti exact frecventa postului dorit ,se poate
receptioana postul introducand direct frecventa postului.
-Alegeti banda dorita

6
-Apasati tasta Input/Lock.Ecranul se va sterge si aveti
8 secunde pentru introducerea frecventei.
-Introduceti frecventa corect cu tastele numerice 0 ~ 9.
-Apasati tasta Input/Lock din nou pentr a receptioana postul.
EXEMPLE DE INTRODUCERE A FRECVENTELOR
POSTURILOR.
1. Introducem frecventa FM 104,7 MHz.
-Alegeti banda FM dupa ce ati pornit radio.
-Apasati tasta Input/Lock pentru a avea un afisaj
ca in imagine.
-Introduceti cu tastele numerice 1.0.4.7 apasand tasta
Input/Lock in 8 secunde dupa introducerea frecventei si veti receptiona postul FM2 104,7MHz.
2. Introducerea frecventei MW567KHz
-Alegeti banda MW dupa ce ati pornit radio.
-Apasati tasta Input/Lock pentru a avea un
afisaj ca in imagine.
-Introduceti cu tastele numerice 5.6.7 apasand
tasta Input/Lock in 8 secunde dupa introducerea
frecventei si veti receptiona postul MW567KHz.
3. Introducerea frecventei SW6.125MHz
-Alegeti banda SW dupa ce ati pornit radio.
-Apasati tasta Input/Lock pentru a avea un afisaj
ca in imagine.
-Introduceti cu tastele numerice 6.1.2.5 apasand tasta
Input/Lock in 8 secunde dupa introducerea frecventei
si veti receptiona postul SW6.125MHz.
4. Introducerea frecventei SW21.40MHz.
-Alegeti banda SW2 dupa ce ati pornit radio.
-Apasati tasta Input/Lock pentru a avea un afisaj ca in imagine.
-Introduceti cu tastele numerice 2.1.4.0 apasand tasta Input/Lock in 8 secunde dupa introducerea
frecventei si veti receptiona postul SW21.40MHz.
INDICATORUL BANDA METRICA SI CONVERSIA
Posturile SW sunt concentrate cu si langa domeniul benzii metrice ,pentru receptie convenabila,aparatul are o
tasta specila Band Meter care poate face conversia in domeniul banzii metrice SW1 si SW2 care sunt folosite
constant.De toate sunt 12 benzi metrice receptionabile pe acest aparat, 5 benzi metrice in domeniul SW1 si 7
benzi metrice la SW2.Dupa pornirea aparatului ,pe SW1 sau SW2 ,se poate converti si selecta banda metrica
prin apasarea scurta repetata a tastei si selecta frecventa benzii metrice si frecventa benzii metrice selectate va fi
frecventa de start a benzii metrice. Se poate selecta postul dorit prin cautarea inainte sau inapoi manual sau au
automat.
SALVAREA POSTURILOR

7
Numerele adreselor de la 0 la 9 ale fiecarei benzi a ADT-S06 sunt folosite pentru a salva 10 posturi receptionate
frecvent. 1. Cautati un post manual, automat sau introducand direct frecventa.
2. Apasati tasta Memory/Clock si semnul MEMORY apare pe afisaj si va palpaii.
3. Introduceti numarul adresei prin tastare pe tastele numerice si numarul adresei va fi afisat in
dreapta jos pe ecran.
4. Apasati tasta Memory/Clock din nou pentru a salva postul si semnul Memory va dispare de pe
ecran.
PROGRAMAREA TIMPULUI DE PORNIRE AUTOMATA
Intrati in - Timp de Pornire Automata “ mod programare apasand scurt tasta “mode” si cand semnul”
“ palpaie ,apasati scurt tasta Memory /Clock astfel incat cifra orei sa palpaie de 5 ori. In timp ce aceasta cifra
palpaie introduceti ora direct din tastele numerice 0 ~ 9 sau selectati ora apasand scurt tastele “+” sau “-“ si apoi
apasati tasta Memory/Clock in timp ce ora palpaie.De aceasta data va palpaii cifra minutelor de 5 ori.
Introduceti minutele cu tastele numerice de la 0 ~ 9 in timp ce minutele palpaie sau selectati minutele prin
apasarea tastei “+” sau “-“.
PROGRAMAREA TIMPULUI DE ALARMA
Apasati repetat scurt tasta “Mode” pentru a intra in programare “ -Timp Alarma” si cand semnul “ “
palpaie de 5 ori ,apasati scurt tasta Memory/Clock astfel incat numarul ora va palpaii de 5 ori. In timp ce ora
palpaie introduceti direct ora cu tastele numerice 0 ~ 9 sau selectati ora dorita prin apasarea tastelor “+” sau “-“
si apoi apasati din nou tasta Memory/Clock in timp ce ora palpaie.La fel pentru minute cand incep sa palpie de 5
ori ,introduceti minutele apasand tastele numerice ) ~ 9 sau tastele “+’ sau “-“.
TIMPUL DE PORNIRE AUTOMATA SI TIMPUL DE START AL ALARMEI.
Dupa programarea timpului de pornire automata in modul ceas apasati scurt tasta Alarm/Snooze pentru a porni
functi timp de alarama.De exemplu pornit sau pornit sau ambele pornite.
Pornit: Daca timpul ajunge la timpul programat ,radio va porni si va receptiona postul
receptionat inainte de oprire.
Apasati tasta Powe pentru oprire.Daca nu apasati tasta Power ,radio se va opri automat intr-o ora.
Daca apasati tasta Alarm/Snooze in timp ce procesul este pornit ,radio va suna 5 minute inainte de
pornire si daca apasati tasta Power in timpul snooze,va iesi din starea de snooze pornit .Daca timpul
ajunge la timpul programat ,alarama va porni.Se poate apasa oricare tasta pentru oprirea alarmei sau
se va opri automat intr-o ora.
TIMPUL DE OPRIRE AUTOMATA SLEEP
1. Programarea Timpului de Oprire Automata Sleep.
-Apasati tasta Sleep pentru a intra in modul timp automat de oprire sleep.Ecranul va afisa
semnul sleep si timpul de oprire sleep din fabrica 100minute.
-Apasati repetat tasta in timp de 4 secunde si ecranul va afisa urmatorii timpi in ciclu ca in
imagine, in pasi de decsrestere de 10 minute la fiecare apasare.
-Eliberati tasta la atingerea timpului de oprire automata dorit si ecranul va reveni la afisajul
frecventei in 4 secunde ca in imagine si radio se va opri automat dupa trecerea timpului
programat.
2. Anularea Timpului de oprire automata.
-Daca doriti sa anulati programarea timpului sleep se poate apasa repetat tasta Sleep pna ce

8
semnul dispare.
-Daca doriti sa anulati functia oprire automata in modul sleep se poate apasa tasta Sleep si
-Semnul va dispare.
SELECTAREA DOMENIULUI DE SENSIBILITATE LUNG/SCURT
Pentru benzile SW si FM ,se poate regla sensibilitatea apasand butonul Domeniu Lung/Scurt. In mod normal se
poate fixa butonul pe pozitia doemeniu lung.Dar daca veti receptiona un semnal puternic de la un post local ,veti
avea interferente puternice si veti fi obligati sa treceti pe domeniu lung.
REGLAJUL VOLUMULUI
Se poate regla volumul rotind
butonul de volum
FOLOSIREA CASTILOR
Daca asculatati radio cu casti ,difuzorul interior al radioului va fi deconectat. Cu difuzorul intern nu se poate
asculta muzica decat mono.Daca doriti sa ascultati un post FM stereo ,trebuie folosite neaparat castile livrate
impreuna cu radio.
FOLOSIREA TASTEI STERGERE
Radio AD-TS06 are un microprocesor CMOS de procesare a datelor incorporat,cand apar erori la inlocuirea
bateriilor sau la schimbarea sursei externe, sau aparatul a fost expus la interferente puternice procesorul intern
intra intr-un mod ciclic si nu mai raspunde la comenzile externe.
1Cand radio nu raspunde la nici-o comanda fara ca semnul “ “ sa fie afisat pe ecran ,sau nu afiseaza
nimic pe ecran,radio este intr-un fel mort.In acest caz se poate apasa tasta Reset cu un obiect subtire
pentru a sterge programarile.
2Cand radio este in receptie normala dar toate alte taste exceptand comutatorul power ,comutator de
iluminare si tasta sus/jos sunt functionale ,radio este de asemenea intr-un fel mort deci va fi necesar sa
sa-l resetati.
FOLOSIREA LUMINII DE NOAPTE
Pentru a folosi radio noaptea in locuri intunecoase AD-TS06 este echipat cu o lumina speciala de noapte. Cand
aveti nevoie se poate apasa tasta Light(lumina).Lumina din partea de jos a aecranului si tastele se vor lumina
timp de 8 secunde.
Daca faceti oricare operatie in 8 secunde iluminarea tastelor continua inca 8 secunde dupa ultima actioanre.
SFATURI PENTRU PROTECTIA RADIO
1Daca doriti sa mentineti performantele aparatului timp indelungat evitati folosirea acestuia in locuri ca:
-bai sau alte locuri umede
-in lumina puternica a soarelui sau langa surse de caldura,
-locuri murdare
2Evitati lovirea sau bruscarea in oricare alt mod al aparatului.
3In caz de probleme cititi cu atentie acest manual.
Suport de sustinere
Deschideti suportul din spatele radioului, trageti la 360° antena telescopica si lasati-l sa stea vertical,
pastrati destul spatiu intre dumneavoastra si boxe.

9
Caracteristici tehnice
Domeniile de frecventa
FM 1: 76.0 – 87.0 MHz
FM2 : 87.0 – 408.0 MHz
MW : 522 – 1620 KHz
SW1 :3.0 – 9.0
SW2: 9.0 – 26.10 MHz
Putere consumata : 150 MW
Putere consumata in standby : 125 MW
Alimentare : 2 x UM3 „AA“ sau baterii echivalente DC 3V
Difuzoare : Intern – D50mm 16 ohmi
Casti – D3.5mm 32 ohm
Dimensiuni 116x72 x 22mm
Reciclarea ecipamentelor electrice si electronice uzate
Acest simbol prezent pe produs sau pe ambalaj semnifica faptul ca produsul respectiv nu
trebuie tratat ca un deseu menajer obisnuit .Nu aruncati aparatul la gunoiul menajer la
sfarsitul duratei de f unctionare ,ci duceti-l la un centru de colectare autorizat pentru
reciclare .In acest fel veti ajuta la protejarea mediului inconjurator si veti putea impidica
eventualele consecinte negative pe care le-ar avea asupra mediului si sanatatii umane.
Pentru a afla adresa celui mai apropiat centru de colectare :
-Contactati autoritatile locale ;
-Accesati pagina de internet :www.mmediu.ro
-Solicitati informatii suplimentare de la magazinul de unde ati achizitionat produsul

Operator's manual (GB) 1~17
APW10
PLL FM STEREO/ MW/ SW RECEIVER

SCRIPTION OF LCD DISPLAY
1. Frequency/ Time indication
2. Bass indication
3. FM Stereo indication
4. Signal intensity indication
5. Time alarm function indication
6. Time auto power on indication
7. Power indication
8. Sleep timing auto off indication
9. Key lock sign
10.SW frequeny unit (MHz)
11.MW frequency unit (KHz)
12.Saved station frequency address
number
13.SW band indication
14.Snooze function indication
15.MW frequency indication
16.FM band indication
17.FM frequency unit (MHz)
ANTENNA
EXTERNAL
ANTENNA JACK
LONG/ SHORT
RANGE SELECTOR
BATTERY DOOR
MEMORY/ TIME
TONE SELECTOR
ALARM/ SNOOZE
LCD DISPLAY
0~9 NUMBER KEY
POWER
VOLUME
LIGHT
BAND SELECTOR
FM SEARCH UP/ TIME +
FM SEARCH DOWN/ TIME -
EARPHONE JACK
MODE KEY
EXTERNAL DC JACK
AUTO SEARCH MEMORY
METER BAND
SLEEP ON/ OFF
RESET
INPUT/ LOCK KEY
1
FM12
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
4 5 6
7
8
9
10
11
12
13
14
15
16
17
1
2
3

USING EXTERNAL POWER SOURCE
1. Plug adapter (not included) into 220V
DC power socket and turn on the
adapter switch.
2. Connect adapter (not included) to
the power jack of the unit.
3. Turn on the radio.
Note:
1. When using external power with
adapter (not included), battery power
in the radio will be automatically cut
off.
2. Prior to use of the adapter, please check the polarity of the
external power source to avoid damaging the unit. Polarity of
the external power plug is shown as follows ( Negative pole is
in the middle ).
3. Voltage of external power can be " " selected in the
range 3V ~ 4.5V.
4. When the adapter is not in use, please turn off the switch. When
using the adapter to supply power to the radio for a long time,
batteries in the unit should be removed.
BATTERY INSTALLATION
1. Open the battery compartment cover
on the back of the radio.
2. Insert 2 AA batteries in the
compartment with correct direction
of the polarity.
3. Close the cover of the compartment.
2

•If you cannot turn of the radio or have unstable volume during
reception, you may have low battery. Turn the volume down or
replace the batteries in that case.
•In order to prevent losing saved data after turning off the radio,
please replace the batteries in time.
• Replacing Batteries
1. At turn-off state of the radio, replace the batteries as soon as
possible.
2. Replace the batteries within 1 minute. Otherwise, clock setting
and station data in the memory will be lost with time display of
0:00, in which case, you have to reset the radio.
3. If you replace the batteries at turn-on state of the radio, you will
lose all saved data in the memory. Therefore, replace batteries
at turn-off state.
Tips:
1. Do not use a new battery with an old one.
2. In case you do not use the radio for a long time, please take out
the batteries so as to avoid leakage that may cause damage to
the unit.
3. In case of leakage happened, please wipe away the electrolyte
in the battery compartment with a piace of soft cloth prior to
inserting new batteries.
POWER INDICATION
The unit has adopted 3-stage power indications
of " " to show battery power state subject
to indication at power on.
Full battery
Low battery
Very low battery in which the indication fllckers and then
automatically goes off.
Tips:
1. In case of low battery sign of " " displayed even at low volume
3
FM 12
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
Flickering

operation or at clock mode, you should replace the batteries at
once to prevent battery leak. If the unit automatically turns off
after turning it on, it means that battery is very low and you should
replace batteries at once. When the radio automatically turns
off due to very low battery, power indication will go up, but it does
not mean that you have normal battery. Battery power should
be judged according to power indication displayed when the radio
is turned on.
2. To ensure the unit to work longer hours, we recommend alkali
batteries.
Corrosion, oxidation, battery-leakage and any other gradually acidic
defect of this nature will invalidate the guarantee.
CHECK PRIOR TO USE
1. Checking Key Lock Switch
When " " sign appears on the
screen after power on, it means
that the radio is at lock state.All
other keys except Key Lock,
Reset, Volume, Long/ Short
Range Switch will not respond and you have to cancel key lock
in order to make other key operations.
Tip: When you carry AD-TS06 radio with you, you may touch the
power switch unconsciously and turn on the radio, causing waste
of battery power; or you may touch other keys while listening to
the radio disturbing you current station.
To prevent this, you can use the special key lock switch of the radio
to lock keys so as to keep current state of reception. Long press
of " Input/ Lock " for 4 seconds can select or cancel key lock.
2. Checking Long/ Short Range Selecting Switch
If you are not close to radio transmission stations, please select
Long Range of the Long/ Short Range Switch so that you can
receive radio signals better.
ADJUSTING CLOCK
The unit has adopted 24-hour system and when power is on, default
4
FM12
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM12
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS

time of the unit is 0:00. If you short press mode key at turn-off state,
you can switch to display of " " time, " " time and current time
in turn; If you short press mode key at turn-on state, you can switch
to display of current time, " " time, " " time and station frequency
in turn.
Adjusting Time
1. Switch the radio to time display mode. If the radio is currently
at turn-on state, please turn off the radio first to get into time
display mode.
2. When short pressing Memory/ Clock key at
turn-off state, hour number flickers for 5 times.
Input desired hour with number keys of 0~9
while it is flickering or press " + " or " - " key
to increase or reduce the number.
Press Memory/ Clock key again and minute number flickers for
5 times. Input desired minute with number keys of 0~9 directly
or press " + " or " - " key to increase or reduce the number.
Note: By short pressing Memory/ Clock key while clock number
flickers, you can confirm the input, or the input will be automatically
confirmed after clock number flickers 5 times.
TURNING ON/ OFF RADIO
1. Turning On with Power Switch Press power switch
and the radio will turn on and get into reception
mode to receive the station signal previously
received before the radio turned off. Press the
switch again and the radio will turn off.
Do not press power switch frequently. Please leave at least 3
seconds of intervals between presser.
2. Turning On with Time Auto Power-on Function by
short pressingAlarm/ Snooze key at turn-off state,
you can turn on time auto power-on function. If
you have already set time auto power-on time, just
turn on time auto power-on function and the radio
will automatically turn on at the preset time of time
power-on time.
5
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS

Tip: For operations of selecting and canceling time auto power-on
functions, please refer to detailed description of time auto power-on
operation on Page 10.
3. SleepAuto Power-off Operation with time auto power-off function,
you can set reception time of the radio with selection range from
10 minutes to 100 minutes. When reception time reaches preset
time, the radio will automatically turn off to prevent the radio
working on for a long time after you sleep wasting battery power.
Steps:
1. Press Sleep key at turn-on state and the screen
will display 100 minutes. Select sleep time
power-off time from the range of 10~100
minutes, 90 minutes for example.
2. If there is no key operation within 4
seconds after you select time, the
screen will return to current radio
frequency display and sleep time sign
will be displayed on the screen
indicating that the radio is at sleep
time auto power-off state and the
radio will turn off automatically after
90 minutes.
Tip: With sleep auto power-off function, you can also set sleep power-
off time after the radio automatically powers on.
SELECTING TONE
The unit has three tone choices for you to select from. Proper
selection of the tone enables you to have the best effect of reception.
Tone can be selected with tone converting key at turn-on state of
the radio. Mono is for reception of weak signals or language programs
of single sound track FM broadcasting; Stereo is for reception of
strong signals of music programs or FM stereo broadcasting; Bass
is a kind of sound effect for reception of stereo station signals with
screen display of " " on top of the screen and by short pressing
tone converting key, you can select stereo state or mono state. By
6
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS

long pressing the key for 2 seconds, you can select or cancel Bass
state and when you select Bass, " BASS "
sign will be displayed on the screen.
Special Note: You will have clearer sound effect
if you turn off Bass while listening with the
speaker.
SELECTING BAND
When you turn on the radio, you can select 5 bands of radio programs
including FM1, FM2, MW, SW1, SW2 with band selecting key with
corresponding band display on the screen.
SEARCHING FOR STATIONS
1. Manual Search
Manual search can be made by numerous short presser of
frequency searching key " + " or " - ", judging reception state until
a satisfactory station signal is searched.
Tip: Manual search is suitable for searching stations with weak signals.
2. Auto Search
Auto search starts with current frequency as starting point to
automatically search station signals up or down and stops
searching when a station signals is searched.
Steps:
1. Keep pressing frequency search key " + " or " - " for more than
0.5 second and when radio frequency display starts to change,
release the key.
2. When the radio receives a comparatively clear signal, auto search
will stop and the radio will receive the searched station.
-If the searched station is not your desired one, you can repeat
the above step to make auto search again.
-If you keep on pressing search key during search, auto search
will skip all of the stations during search process.
-If you press search key again during search, you can stop
auto search.
7
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
Stereo
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
Bass Stereo

Tips: - Auto search is suitable for searching stations with strong signals
- In order to quickly locate stations with weak signals, you can
make use of the advantages of auto search and manual search
by reaching a station quickly with auto search first and then
making fine tuning with manual search.
- If the speed of digit change slows down on the screen during
auto search, there may be a station with weak signal around and
you can use manual search to search for the station with weak
signal.
3. Auto Search Saving Function
Turn on the radio, select a band to be searched by short pressing
band key and then short press auto key and the unit will
automatically search for station frequencies and save them in
sequence from low frequencies to high frequencies in the current
band. Auto search stops when 10 stations are searched and
saved or reaches the end of the frequency range of the band
and starts receiving the last searched and saved station. Short
press of other keys than " Light ", " Mode ", " Tone " and "Alarm/
Snooze " will stop and exit from auto search saving.
Note: Search and saving process
will cover the original stations
saved in the memory.
4. Receiving and Memorizing Station
AD-TS06 radio can provide memory space of 20 stations for FM,
60 stations for FM2, 40 stations for MW, 30 stations for SW1,
50 stations for SW2, all together 200 stations. You can number
your favorite stations and save them in the memory. When you
listen to the radio, you can select the address to listen to the
saved stations.
1. Press Band key to select desired band.
2. Press number keys directly to select
one of the address numbers from 0 to
9 select any one of the station
frequencies saved in the address.
8
BAND
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 12
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 12
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS

5. Inputting Station Frequency
If you remember the correct frequency of your
desired station, you can receive the station by
directly inputting the frequency of the station.
a)Select desired band.
b)Press Input/Lock key. Screen will be cleared
and there is 8 seconds for you to input the
frequency.
c)Input the frequency correctly with number keys
of 0~9.
d)Press Input/ Lock key again to receive the station of the
frequency.
EXAMPLE OF INPUTTING STATION FREQUENCY
1. Inputting FM 104.7MHz
a)Select FM band after turning on the raaio.
b)Press Input/ Lock key for display as
shown in the pictures on the left.
c)Input 1.0.4.7 with number keys, press
Input/ Lock key again within 8 seconds after inputting the
frequency and you can receive the station of FM2 104.7MHz.
2. Inputting MW567KHz
a)Select MW band after turning on the radio.
b)Press Input/ Lock key for display as shown
in the pictures on the left.
c)Input 5.6.7 with number keys, press Input/ Lock key again after
inputting the frequency and you can receive the station of
MW567KHz.
3. Inputting SW6.125MHz
a)Select SW1 by short pressing Band after
turning on the radio.
b)Press Input/ Lock key for display as shown
in the pictures on the left.
c)Input 6.1.2.5 with number keys, press Input/ Lock key again
after inputting the frequency and you can receive the station
of SW6.125MHz.
9
FM 1 2
MW SW1 2
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW1 2
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW1 2
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS

4. Inputting SW21.40MHz
a)Select SW2 by short pressing Band after
turning on the radio.
b)Press Input/ Lock key for display as shown
in the pictures on the left.
c)Input 2.1.4.0 with number keys, press Input/ Lock key again
after inputting the frequency and you can receive the station
of SW21.40MHz.
Tip: At short wave state, as the unit has adopted advancing step length
of 0.005MHz, so far as you input the third digit after decimal, the unit
will automatically correct it to 5. On completion of correct input of short
wave frequency, the unit will automatically adjust the input digits and
display decimal form. In case input frequency is beyond the frequency
range of the band (or an inkling input is judged to be beyond the
frequency range) when you input a station frequency, there will be
"Err" (error) displayed on the screen and the frequency input will be
ineffective. In this case, please make sure of the band in which you
desired station belongs and then try it again.
METER BAND INDICATION AND CONVERSION
As SW stations are mainly concentrated within and near meter band
range, for convenient reception, the unit has a special Meter Band
key that can make conversion within the range of meter bands of
SW1 and SW2 that are constantly used. There are altogether 12
meter bands in the unit, 5 meter bands in the range of SW1 and 7
meter bands in the range of SW2. After turning on the radio, at the
state of SW1 or SW2, you can convert and select meter band with
repeated short presses on the key and the selected meter band
frequency will be the starting frequency of the meter band. You can
select your desired station by searching forward or backward manually
or automatically.
Note: If press the key at FM or MW, the unit will get into SW1.
10
FM 1 2
MW SW1 2
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW12
SNOOZE
MHz KHz MHz
MEMO
BASS
FM 1 2
MW SW1 2
SNOOZE
MHz KHz MHz
MEMO
BASS