Akiles OffiWire User manual

Akiles 3:1 OffiWire Manual
Wire Binding Machine
Instruction Manual

INTRODUCTION
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW ,AMODERN, PRACTICAL AND RELIABLE
PUNCH AND BINDING EQUIPMENT.YOUR WAS DESIGNED WITH PREMIUM QUALITY COMPONENTS
TO GUARANTEE AN EFFORTLESS AND EASY BIND, AS WELLAS MANY YEARS OF TROUBLE- FREE SERVICE.
IMPORTANT
WE RECOMMEND THAT YOU TAKE AFEW MINUTES TOFAMILIARIZE YOUR SELF WITH THE FUNCTIONS OF
YOUR NEW .YOU WILL FIND OUT THATWITH JUST ALITTLE PRACTICE, ANYONE CAN ACHIEVE
PROFESSIONAL RESULTS.
FEATURES
OPERATIONAL MANUAL

Letter size Sheet (11")
Cover
ASSEMBLY
Your Comes fully assembled. Simply place it
on top of a sturdy work table and you are ready to work.
PUNCHING
1. Move (align) Side Margin Guide to proper sheet & cover
size. Remark: There are different side margin setups for
11" sheets and their 11-1/4" covers.
2. Insert sheets and pull handle forward to punch.
3. Return Punch handle to its upright position.
4. Repeat steps two and three as needed.
TIPS:
a) Maximum single punching: 10 sheets of 20 lbs. paper
b) Comfortable single punching: 8-10 sheets of 20 lbs.
paper.
c) Punch inner sheets and covers separately, as side
margin may vary.
d) Re-align (center) margins for oversize covers.

Back Cover
Back Cover
Cover
Wire
BINDING (INSERTING & CLOSING)
1. Slide Document to be bound into the Wire Selector, to determine the correct wire size to use.
See picture 1.
2. Slide selected wire into the Wire Snatch. See picture 2.
3. Insert document from last pages to first pages. Then insert front cover. The back cover should
be inserted last with the inside facing up. See picture 3.
4. Take out inserted document from the wire snatch. See picture 4.
5. Place inserted document into wire closure. See picture5&6 .
6. Pull closing handle down to close. See picture 7.
7. Return handle to upright position.
8. Take document out and turn back
cover over. The binding is complete.
REMARKS:
The seam of the closed wire should be just
touching. Slightly adjust the bilateral closer
controls for under-closed or over-closed wire.
Last Page
Back Cover
Cover
Cover

WARRANTY
TECHNICAL INFORMATION
YOUR HAS A WARRANTY OF ONE YEAR, FROM ITS PURCHASE DATE. IN THE EVENT OFA
MANUFACTURERS DEFECT, YOUR DISTRIBUTOR (AT OPTION) WILL REPAIR OR REPLACE IT. IMPORTANT:
THIS WARRANTY DOES NOT COVER DAMAGES DUE TO IMPROPER USE OR MISS TREATMENT OF THE
UNIT, INCLUDING ANY EXTRAORDINARY EVENT LEADING TO THE DAMAGE OF THE MACHINE, WHETHER IT
IS REVERSIBLE OR NOT.
IF THE IS NOT OPERATING PROPERLY, FIRST FOLLOW THE CORRECTIVE ACTIONS ABOVE. IF
THE PROBLEM PERSISTS, PLEASE CONTACT YOUR DEALER FOR FURTHER INSTRUCTIONS. PLEASE HAVE
YOUR MACHINES SERIAL NUMBER AND THE PURCHASE DATE READY. IF THE MACHINE MUST BE
RETURNED TO YOUR DISTRIBUTOR, IT IS YOUR RESPONSIBILITY TO PROPERLY PACK AND SHIP IT, AS
ANY DAMAGED INCURRED DURING ITS TRANSPORTATION IS NOT COVERED BY OUR WARRANTY POLICY.