Akustik EP24512 User manual

SPEAKER BOX
EP24512

RMS
RMS
1
50 W
15"
15"Speaker box
)
Do not overload the box to avoid damage to the speakers.
Do not place an open fire(candles etc)on top or next to the box-FIRE HAZARD
Only connect to an earthed mains output of AC 120/240V~50/60Hz.
For indoor use only. If the box is used outdoors,you need to make sure that no humidity
can enter the box.
When not in use,unplug the unit from the mains.
Unplug the unit from the mains prior to checking or replacing the fuse.
Make sure that the box is placed on a stable, strong surface.
Only use suitable means of transportation if you want to move the box-BEWARE
OF YOUR BACK!
Always unplug the unit during a thunderstorm when it is not in use.
If the unit has not been used for a long period of time, condensation can be occurred
inside the house.
Please wait the unit reaching room temperature before switching it on.
Never try to repair the unit by yourself.It does not contain any user repairable parts.
Run the main lead in a way that nobody can fall over it and nothing can be put onto it.
Set the unit to the lowest volume before switching it on.
Keep the unit out of the reach to children.
4 ohm
45HZ-18KHz
96dB(+/-2dB
XLR/6.35mm/RCA
20 mV
750 mV
on Batteery
on AC 120 W
Peak Power 500W

13.LINE IN / MP3 input / output volume control
14.Echo control
15.Master volume control knob
16.A wireless microphone receiving antenna
17.A wireless microphone indicator
18.A wireless microphone volume control
19.B wireless microphone indicator
20.B wireless microphone volume control
21.Wireless power indicator
22.Wireless microphone power switch
23.B wireless microphone receiving antenna
24.Battery level indicator
25.External entry 12V DC
26.Fused IEC main entrance
27.DC: Fast Fuse Socket
28.Main power switch
27
AC 120-240V 60/50Hz
3
4
5
10
11 12 13 14
7
6
2
1
9
8
15
17
16
24
26 28
18 19 20 21
23
22
25
12.Microphone priority voice switch
11.LINE IN / MP3 input selector switch
10.Preamplifier RCA input / output jack
Adjust frequencies to +/-12dB
9.5 band graphic equalizer.1.LCD screen
2.MP3 Player control.
: Press the Play button once to play the track.
Press again to pause
Mode control switches between inputs
Mode: Bluetooth / FM / USB / SD
: Press once to repeat the single, press again
To play all tracks repeatedly, press once to turn
off repeat mode.
: Press this button to go to the previous song /
Guide or hold for 3 seconds
Reduce the volume VOL-
: Press this button to go to the next song /
Guide or hold for 3 seconds
Increase volume VOL +
REC: USB/SD mode Press this button to start recording.
The content to be recorded is input from MIC/LINE IN, and
then press to play the recording again.
3.SD card input
4.USB input
5.Mic1 input
6.Mic2 / guitar input
7.Mic1 volume control
8.Mic2 / Guitar Volume Control

4
Battery installation diagram
151mm
1. Battery specification: 12V 7AH, the size of battery
:151*65*94mm
2.Connection instruction: Remove the protection type
from connector of cord, red cord should be connected to
positive, black cord connect to negative.
3.Put battery inside of housing in right direction, then
screw with cover tightly
65mm
94mm