AL Tech HALO 85cm DISH User manual

1. Select a location for the ODU
Direction of Travel
2. Mount the ODU
3. Mount the IDU Power Supply
Pick an area on the roof of your mobile
home that will allow the ODU to be
mounted as flat and level and strong as
possible. With good support that will
permit the dish,once fitted and
raised,to have a full 360 degree
rotation and elevation range.
Mind the direction of Travel.
Drill the mounting holes and cable
access hole to prepare the site for
installation.
Ensure that all screw fixings are
covered with sealant to ensure that
there are no leaks into the RV.
Mount the Bump Stop.
A dry secure location is required for
the IDU to be mounted.
Drill the mounting holes and prepare
the location for installation.
Choose a suitable location for the IDU
Touch Panel.
Flush Mount - A square hole with
length 125mm and width 50mm is
required for the IDU mounting.
Make sure there is nothing behind
where you are cutting.
Carefully connect the Cable between
IDU Touch Panel and Power Supply of
the IDU.
The length of RJ45 ethernet cable you
use should be within 8 meters.
The IDU is required to be opened to
access the four mounting screw holes.
Carefully open the top of the Touch
Panel from the notched side.
Use the four screws provided to mount
the IDU to the wall.
Carefully refit the touch panel to the
IDU.

4. Wiring Diagram
5. Search Satellite
OPTUS D3
LOCK 156.0E 80%
MENU
6. One-button to change the target satellite
SATELLITE SELECTION
A: OPTUS D3
B: INTELSAT 19
C: OPTUS D2
7. Close system
OPTUS D3
LOCK 156.0E 80%
MENU
Press ON/OFF will search satellite.
Then antenna will lock onto target
satellite automatically.
Press Function key can change the
target satellite which you want in the
list.
Wait for 3 second, the target satellite
will be selected automatically and
tracked by the antenna.And it will
return to Normal Mode automatically
at the same time.
If you use ignition stow function you
install at vehicle, the system will
automatically shut down dish on
vehicle startup.
OR press ON/OFF. Antenna system
will retract to shut down position.
Before you driving, please confirm
the dish is completely retract to shut
down position.
Ethernet
Cable
YELLOW:
Auto Close Feature (Optional)
Ignition Positive ONLY(+)
10A FUSE
(Not supplied)
Micro USB Cable
To View the UEC website and access the latest documentation.
https://uec.com.au/halo-85cm-documents
HALO 85cm DISH
Quick Start Guide