Aladdin FABRIC-LITE 20 Bi-Color User manual

Aladdin FABRIC-LITE 20
Bi-Color USER MANUAL

THANK YOU FOR YOUR PURCHASE
Aladdin Lights
[email protected]
User Manual
Version: 1.0

Unpack your panel and accessories from the kit. Plug in the panel connetor
to your dimmer-unit. Use the extansion in between if needed. IPlug in your
dimmer-unit to a power outlet. Instead of using the power outlet, there’s
an integrated V-Mount or Gold-Mount plate on top of the dimmer. You can
use batteries from 12-30V DC.
Just note that you need batteries which can handle the power draw of 200
watts from the panel. There’s a simple calculation for that:
If you are using 14.8V batteries you need at least a working current of
13.5A. If your battery is rated at 14.8V and 200Wh/13.5Ah with a working
current of 13.5A you can run your FABRIC-LITE 20 for one hour.
For any further questions about using our products please refer to our cus-
tomer service or watch the instructional videos on www.aladdin-lights.com
or YouTube.
START-UP GUIDE
1
1 Metal ring for mounting (can be attached to magnets)
2 Velcro
3 Connector plug
POWER DRAW (W) = MIN. WORKING CURRENT (A) =
BATTERY VOLTAGE (V)
200 (W) = 13.5 (A)
14.8 (V)
1
2
3

2

IMPORTANT CAUTIONS AND WARNINGS
• Do not use near flammables and heaters.
• Do not expose the unit to direct sunlight for a long period (applies also for
storing in a car).
• Do not use the dimmer wire or extension wire to hang or mount the panel.
• Do not bend or fold the panel more than 90 degrees.
• Do not tape directly on the LEDs of the panel - they can burn out.
• Do not damage the product with improper force or cause any impact with
heavy objects.
• Do not cut the panel with sharp objects.
• Keep out of reach of children.
• The panel will heat up when running a long period of time on 100% pow-
er, make sure to have it in your eyesight at all times. Use the frame to assure
enough air flow for heatreduction.
• Use the product only within the temperature range of -10°C – +40°C.
• Make sure the panel has cooled down before storing it in the pouch or
any other case.
• When you have technical problems while using the product, stop using it
immediately and contact your dealer / reseller.
3

SELECTED OPTIONAL ACCESSORIES
WARRANTY
We provide a one year warranty period after the purchase. This warranty
covers repairs or a replacement for faulty products within this period. After
this warranty has been expired, you can still get repairs for your product
which will be charged extra.
Aladdin Lights reserves the right to refuse warranty service on products un-
der disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
4
FBS2035FR
3x3 frame with stud.
FB2035BBALL
For strapping the panel
to the frame.
FBS2035GRID
Grid for 3x3 frame.

Light source 200W Bi-Color LEDs
CRI Ra 98
TLCI 98
Color temperature 2900K - 6300K
Beam angle 140°
Dimmer Dimming: (0.5%–100%)
Cooling Passive cooling
Dimmer input 12V to 30VDC
Power unit input Automatic voltage 100V to 240VAC
Power consumption 200W
Dimensions 220mm (W) x 115mm (H) x 65mm (D)
Weight 930g
Connection Connector plug
Temperature range -10°C – +40°C
DMX512 support With dimmer unit (in/out)
DMX512 2 Channels - White Bi-Color
Material Fabric
TECHNICAL SPECIFICATIONS
THANK YOU FOR YOUR PURCHASE
5

www.aladdin-lights.com
PICTURE BY ALAVEZ BURGUETE DESIGN