Aladdin AMS-FB350BI SQ User manual


AMS‐FB350BISQ



 


PRINCIPALSPECIFICATIONS

LightsourceSuperhighCRIPowerLED's350W
CRICRI97/TLCI97
Colortemperature2850k~6098k
Beamangle140°
CoolingPassive
MaterialFabric
Dimension900mmX900mm
LEDArray30X40





CAUTION

Pleasekeepbelowthingsinmindbeforeusingtheproductandifyouhaveaproblemplease
getintouchwithstoreorwarrantyservicenumber
‐Donotturnonthelightforlongperiodoftimewhilethesheetisfolded
‐Donotusenearflammable'sandheater
‐Donotuselonghoursinrainorplaceswheretheproductmaygetwet
‐Donotexposetodirectsunlight
‐Usetheproductonlyinthetemperaturerangefrom‐10℃ to 40℃
‐Keepoutofinfants
‐Donottouchwithwethands



WARRANTY

Weofferaone‐yearfreewarrantyperiodafterpurchasedandyoucancontinuallygeta
warrantyservicewithextrachargeafterexpiredfreewarrantyperiod
Wedonotguaranteetheserviceforfreeofchargeincaseofbeloweventhoughitiswithin
freewarrantyperiod
‐Productfailureduetoconsumernegligence
‐Productfailureduetopowertroublethatwedidnotallow
‐Productfailureduetodisassemblingbyunofficialfacilitiesthatwedidnotallow
‐Productfailureduetonaturaldisaster












Thankyouforpurchasingourproduct

Purchasedstore:
Purchaseddate:
Manufacturer:Aladdin/www.aladdin‐lights.com/tel.+82‐2‐386‐1245

AMS-FB350BI DIM
PRINCIPAL SPECIFICATIONS
Compatible sheet types
Fabric350
Range of dimming
0.5% ~ 100.0% (0.1% resolution)
Color temperature
2850k ~ 6098k
Output power
Up to 350W
Output channel
2 channels / Bi-Color
User interface
Graphic OLED (128 X 64)
Input power sources
AC to DC Adaptor (24V)
DC Battery (26V)
* Battery is not included
Supports DMX512
Cable or LumenRadio

SUMMARY
Flicker free high precision dimming controller
-It can adjust to 2500 steps for dimming control
-It can be turned on when the dimming level is lower than 1%
Useful OLED screen
-The small OLED screen displays useful information for operator
-It provides an easy way to set the parameters with three buttons
Provides a variety of remote control methods
-It supports wired DMX512 control protocol
-It supports wireless DMX (LumenRadio) on ISM Band
CAUTION
Please keep below things in mind before using the product and if you have a problem please
get in touch with store or warranty service number
- Do not use near flammable's and heater
- Do not use in rain or places where the product may get wet
- Do not expose to direct sunlight
- The product will heat up when you use for a long period of time, In this case you should be
careful to touch and you would better to separate between the dimmer and power source to
prevent thermal conduction by power source
- Use the product only in the temperature range from -10℃to 40℃
- Use the product with power sources that we suggested
- You must set the sheet type that you want to use before connecting to sheet
- Keep out of infants
- Do not touch with wet hands
- Do not put different power source to each channel on dual power module
HOW TO ASSEMBLE WIRE

DESCRIPTION
User interface
- OLED Display
- Buttons
On/Off switch
DMX Output
Dimming volume
Color volume
Sheet connector
Antenna (optional)
Mount for tripod
For debug
DC Input
DC Output
Select switch
1. Dual Battery
2. Off
3. Dual DC Input
DC Input 1
DC Input 2
Mount for Dimmer
Mount for
26V Battery
DMX Input
(Tested with
30cm cable)

OPERATION
OLED
STATE
T-D
100.0%
3000k
Ordinary state,
Displays color temperature on the left side of screen
Displays level of dimming on the right side of screen
T-D
LOCK
3000k
When you want to make sure that the volume can't be
changing you can make it with long menu button
3115k
100.0%
Color temperature indicator is enlarged
while the color temperature volume is turning
DMX512
100.0%
3000k
Indicate [DMX512] on the left-top side of screen when the
product is connected to DMX console
SETUP
Get into setup-mode and change each mode with [MENU] button, Set parameters on setup-
mode with [UP/DOWN] buttons
MODE
NOTE
DMX
>0 0 1
CH
Set DMX channel number (range 1 ~ 512)
DMX
Radio
512
Choose DMX512 method [Cable or Radio (Lumen Radio)]
It's going to reset automatically if you change this option
RF Link
YES
Reset
Clear link ID of Lumen Radio Transmitter on the dimmer if you
choose 'YES'
WARRANTY
We offer a one-year free warranty period after purchased and you can continually get a
warranty service with extra charge after expired free warranty period
We do not guarantee the service for free of charge in case of below even though it is within
free warranty period
- Product failure due to consumer negligence
- Product failure due to power trouble that we did not allow
- Product failure due to disassembling by unofficial facilities that we did not allow
- Product failure due to natural disaster
Thank you for purchasing our product

Purchased store:
Purchased date:
Manufacturer: Aladdin / www.aladdin-lights.com / tel. [phone]