Aladdin BASE-LITE 100 Bi-Color User manual

Aladdin BASE-LITE 100
Bi-Color
USER MANUAL

THANK YOU FOR YOUR PURCHASE
Aladdin Lights
[email protected]
User Manual
Version: 1.0

1 V-Mount or Gold-Mount plate
2 DMX in
3 Color temperature wheel
4 Dimming control wheel
5 DMX out
6 DC input
4
3
1
5
6
2
Unpack the fixture and mount it on a stand. There is an AC adapter in the
box for using your main power outlet with the fixture. Instead of using the
power outlet, there is an integrated V-Mount or Gold-Mount plate on the
backside. You can use batteries from 12-30V DC.
Just note that you need batteries which can handle the power draw of 100
watts from the panel. There’s a simple calculation for that:
If you are using 14.8V batteries you need at least a working current of
6.8A. If your battery is rated at 14.8V and 200Wh/13.5Ah with a working
current of 13.5A you can run your BASE-LITE for two hours.
For any further questions about using our products please refer to our cus-
tomer service or watch the instructional videos on www.aladdin-lights.com
or YouTube.
1
START-UP GUIDE
POWER DRAW (W) = MIN. WORKING CURRENT (A) =
BATTERY VOLTAGE (V)
100 (W) = 6.7 (A)
14.8 (V)

2

IMPORTANT CAUTIONS AND WARNINGS
• Do not use near flammables and heaters.
• Do not expose the unit to direct sunlight for a long period (applies also for
storing in a car).
• Do not damage the product with improper force or cause any impact with
heavy objects.
• Keep out of reach of children.
• The panel will heat up when running a long period of time on 100% pow-
er, make sure to have it in your eyesight at all times.
• Use the product only within temperature range of -10°C – +40°C
• Make sure the panel has cooled down before storing it in the pouch or
any other case.
• When you have technical problems while using the product, stop using it
immediately and contact your dealer / reseller.
3

BL100BD
Barndoors with four
leaves.
SELECTED OPTIONAL ACCESSORIES
WARRANTY
We provide a one year warranty period after the purchase. This warranty
covers repairs or a replacement for faulty products within this period. After
this warranty has been expired, you can still get repairs for your product
which will be charged extra.
Aladdin Lights reserves the right to refuse warranty service on products un-
der disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
4

Light source 100W Bi-Color LEDs
CRI Ra 99
TLCI 98
Color temperature 2900K - 6000K
Beam angle 140°
Dimmer Dimming: (1%–100%)
Cooling Passive cooling
Dimmer input 12V to 30VDC
Power unit input Automatic voltage 90V to 260VAC
Power consumption 100W
Dimensions 430mm (W) x 300mm (H) x 80mm
Weight 2300g
Connection Internal
Temperature range -10°C – +40°C
DMX512 support Yes (in and out)
DMX512 2 channels - White Bi-Color
Material Aluminum 6061 T6 (aircraft grade)
TECHNICAL SPECIFICATIONS
THANK YOU FOR YOUR PURCHASE
5

www.aladdin-lights.com
PICTURE BY ELIA QUADRI