Aladdin AMS-FB200BI DIM User manual

Aladdin 200W DIMMER
with Lumenradio and DMX USER MANUAL

THANK YOU FOR YOUR PURCHASE
Aladdin Lights
[email protected]
User Manual
Version: 1.0

1 V-Mount / Gold-Mount plate (for 12-30V DC batteries)
2 Antenna mount
3 AC adapter holder
4 Bracket with 3/8” thread
5 Color temperature dial
6 Dimming dial
7 D-Tap output
8 Panel connector socket
9 DMX output (5-pin)
10 DMX input (5-pin)
11 AC adapter input
1
3
5
10
4
2
69
8
11
7
START-UP GUIDE
1

OLED STATE
Ordinary state shows the color temperature in the left corner
and the dimming percentage in the right corner.
While changing the color temperature the number enlarges.
The dimming percentage appears in the right corner.
When connected to a DMX console or Lumenradio the display
shows the color and dimming values and the DMX512 text in
the top left part of the screen.
When locked by the user the display shows a “LOCK” text.
You can lock/unlock the dimmer by pushing the MENU button
for 2 seconds.
OLED OPERATION
Set the DMX channel number by pushing the MENU button to
change between the 3 columns and the UP / DOWN buttons to
change the value (ranges from 1 - 512).
Choose the DMX method (DMX cable / Lumenradio). The dim-
mer automatically restarts to save the settings.
To clear the link ID of the Lumenradio transmitter set this pa-
rameter to YES. Then confirm by pressing MENU.
Change the sheet type when using different panels (BI-FABRIC
2 (equals BI-FLEX 2) / BI-FABRIC 4 (equals BI-FLEX 4) / FABRIC-LI-
TE 20). The dimmer automatically restarts to save the settings.
DMX
CH >0 0 1
DMX
512 Radio
RF Link
Reset YES
Sheet
Type Fabric200
2
STATES
The OLED display shows you different informations about the states.
T-D
3200K 100%
T-D
3200K LOCK
DMX512
5600K 75.8%
100%
3152K
OPERATION
With the (MENU) button you can get into the menu and change settings.
Navigate with the (MENU) and (UP / DOWN) buttons.

IMPORTANT CAUTIONS AND WARNINGS
• You must set the sheet type (see OPERATION) before connecting to a
panel.
• Do not use near flammables and heaters.
• Do not expose the unit to direct sunlight for a long period (applies also for
storing in a car).
• Do not damage the product with improper force or cause any impact with
heavy objects.
• Keep out of reach of children.
• Use the product only within temperature range of -10°C – +40°C.
• When you have technical problems while using the product, stop using it
immediately and contact your dealer / reseller.
3

FL12BIBASIC2M
2 meters of extension
cable for inbetween dim-
mer unit and panel.
FL12BIEXCA5M
5 meters of extension
cable for inbetween dim-
mer unit and panel.
FB2035ANT
Antenna for wireless Lu-
menradio transmissiion.
SELECTED OPTIONAL ACCESSORIES
WARRANTY
We provide a one year warranty period after the purchase. This warranty
covers repairs or a replacement for faulty products within this period. After
this warranty has been expired, you can still get repairs for your product
which will be charged extra.
Aladdin Lights reserves the right to refuse warranty service on products un-
der disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
4

Article code AMS-FB200BI DIM
Compatibility BI-FABRIC 2 & 4, BI-FLEX 2 & 4, FABRIC-LITE 20
Dimmer Dimming: (0.5%–100%)
Cooling Passive cooling
Power input 2-pin socket (AC adapter) or battery plate
Power consumption 200W
Dimensions 200mm(W) x 150mm (H) x 168mm
Weight 2000g
User interface Graphic OLED (128x64)
Temperature range -10°C – +40°C
DMX512 support In (5-pin) and out (5-pin) / Lumenradio
DMX512 2 channels - White Bi-Color
Dimming range 0.5% - 100%
Temperature range 2800K - 6100K
TECHNICAL SPECIFICATIONS
THANK YOU FOR YOUR PURCHASE
5

www.aladdin-lights.com
PICTURE BY ELIA QUADRI