Aladdin ALL-IN ONE User manual

Aladdin ALL-IN ONE
Bi-Color / RGB
USER MANUAL

THANK YOU FOR YOUR PURCHASE!
Aladdin Lights
[email protected]
User Manual
Version: 1.0

1 Switch between RGB and Bi-Color control
2 Dimming control
3 Color temperature control
4 Metal corner (can be attached to magnets)
5 Velcro
6 Metal ring for mounting (can be attached to magnets)
7 Velcro
4
6
7
1
23
5
Unpack your panel and accessories from the box. The panel features a built-
in dimmer unit which can be controlled on the back of the panel. Plug in
your AC adapter or D-Tap cable to the input box of the panel. If the cable
is too short, just use the included extension cable in between. When you
connect the AC adapter to the power outlet you’re ready to go.
If you have also purchased the optional DMX Attachment (ALL-DMXAT) or
the Wired Dimmer (ALL-WDIM) you can put them between the panel (or
extension cable) and the AC adapter (or D-Tap cable).
Just note that you need batteries which can handle the power draw of 70
watts from the panel. There’s a simple calculation for that:
If you are using 14.8V batteries you need at least a working current of 4.7A.
START-UP GUIDE
1
POWER DRAW (W) = MIN. WORKING CURRENT (A) =
BATTERY VOLTAGE (V)
70 (W) = 4.7 (A)
14.8 (V)

If your battery is rated at 14.8V and 100Wh/6.8Ah you can run your ALL-IN
TWO for more than one hour.
For any further questions about using our products please refer to our cus-
tomer service or watch the instructional videos on www.aladdin-lights.com
or YouTube.
DOWNLOAD THE APP
Using your ALL-IN panel with the new app for smartphones is a convenient
way of controlling your light. It is available as free download on Android
and iOS. You can store your own color filters in the app by dialling the
desired RGB / Bi-Color values, have more control over the hues and sat-
uration of lighting effects and much more. Give it a try and you will be
amazed about the convenience in your workflow. Find the QR-codes for
direct download below.
2
iOS Android

IMPORTANT CAUTIONS AND WARNINGS
• Do not use near flammables and heaters.
• Do not expose the unit to direct sunlight for a long period (applies also for
storing in a car).
• Do not use the dimmer wire or extension wire to hang or mount the panel.
• Do not bend or fold the panel more than 90 degrees.
• Do not tape directly on the LEDs of the panel - they can burn out.
• Do not damage the product with improper force or cause any impact with
heavy objects.
• Do not cut the panel with sharp objects.
• Keep out of reach of children.
• The panel will heat up when running a long period of time on 100% pow-
er, make sure to have it in your eyesight at all times. Use the X-BEND holder
or frame to assure enough air flow for heat reduction.
• Use the product only within temperature range of -10°C – +40°C.
• Make sure the panel has cooled down before storing it in the pouch or
any other case.
• When you have technical problems while using the product, stop using it
immediately and contact your dealer / reseller.
3

FR1X1KIT
Frame with ballhead and
diuser for easy installa-
tion and more sturdiness.
ALL-WDIM
The ALL-IN Series con-
troller allows you more
control over the RGB and
Bi-Color values as well as
eect values and DMX.
ADBALL50
Aladdin Ball with diuser
for soer and round
lighting.
SELECTED OPTIONAL ACCESSORIES
WARRANTY
We provide a one year warranty period after the purchase. This warranty
covers repairs or a replacement for faulty products within this period. After
this warranty has been expired, you can still get repairs for your product
which will be charged extra.
Aladdin Lights reserves the right to refuse warranty service on products un-
der disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below listed causes, the warranty does not apply, even
if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
4

Light source 50W Bi-Color / 20W RGB LEDs
CRI Ra 98
TLCI 98
Color temperature 2900K - 6300K
Beam angle 140°
Dimmer Dimming: (1%–100%)
Cooling Passive cooling
Dimmer input 12V to 24VDC
Power unit input Automatic voltage 100V to 240VAC
Power consumption 70W
Dimensions 300mm (W) x 300mm (H) x 18mm (w/ built-in
dimmer)
Weight 400g
Connection Bluetooth / Connector plug
Temperature range -10°C – +40°C
DMX512 support With optional DMX attachment / controller
DMX512 2 Channels - White Bi-Color
3 Channels - RGB
TECHNICAL SPECIFICATIONS
THANK YOU FOR YOUR PURCHASE!
5

www.aladdin-lights.com
PICTURE BY FAUZEE NASIR