Alaterre Furniture Tahiti Vanity User manual

4/12/17 1 of 3 Tahiti
Alaterre Furniture
Step 1
Read through these instructions thoroughly before beginning installation.
NOTE: Although the average consumer can install this product, we recommend you consult
with a trade professional if you have any questions or concerns.
Tahiti Vanity
Thank you for purchasing a Bath Vanity from Alaterre Furniture. Installation of this product
requires a Level, drill & screwdriver. It is helpful to have a second person present when
installing your vanity.
Vanity Installation Instructions
PARTS
2
A
NO. DRAWING DESCRIPTION Q'TY
VANITY CASE 1
B
LEVELER
C 4
WOOD SCREW
DKNOB 2
E2

4/12/17 2 of 3 Tahiti
Step 2
Remove Vanity and hardware from packing material.
Step 3
Place Vanity in the desired location. Using the levelers in the feet, make sure the
Vanity is level and plumb to the wall.
Step 4
Locate the studs in the wall behind the Vanity.
Mark the location of the Studs in the wall on the stretcher rail.
Drill a 1/16" thru hole in the center of the Stretcher Rail at the location of the studs in the wall.
Step 5
Secure the Vanity to the wall using screws (B)
Make sure the screws align with the Stud in the wall.
C

4/12/17 3 of 3 Tahiti
Step 6
Attach Konbs (D) Using Screw (E) to Doors.
CARE
Clean with mild soap and wipe dry.
REPLACEMENT PARTS
Please do not contact the company you purchased from as we can help you faster.
Order replacement parts and hardware at "alaterrefurniture.com"
E
D