Alaterre Furniture Round End Table User manual

4/12/17 1 of 2 Round End Table
Alaterre Furniture
Round End Table
Thank you for purchasing our Round End Table. We have found it helpful to have a second
person present in at least one step of the assembly.
Assembly Instructions
Lay out all parts on a "non-abrasive"surface to avoid scratching furniture.
NOTE: The Tops and Shelves used in this collections are SOLID WOOD. Solid Wood can shrink over time. The design of
this collection has the top fitting inside a metal frame. We engineered the tops to be ovesized in the width to accomadate any
shrinkage.
1
A
NO. DRAWING DESCRIPTION Q'TY
TOP 1
B
METAL END
C2
SHELF
4
D
NO. DRAWING DESCRIPTION Q'TY
M6*40MM BOLT 5
E
WASHER
F5
M6*20MM BOLT
FELT PAD
G4
HWRENCH 1

4/12/17 2 of 2 Round End Table
Step 1
Read through these instructions thoroughly before beginning assembly. We have found this to be of great
value when first assembling this product.
Step 2
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non
abrasive surface (like the carton or carpet) to prevent damage to the finish.
Step 3
With Grooves facing down, position Top (A) in to the Metal Frame Assembly (C ). Aleign the Metal Frame Assembly
to the Grooves in the Top. Attach the Top in 5 places to the Metal Frame using the 40 MM Bolt (D) & Washer (F).
DO NOT TIGHTEN FIRMLY AT THIS TIME.
Step 4
Note: It will help to have a second person at this time to assist in assembly.
Lay on side and position Shelf (B) in to Metal Frame Assembly (C ). Aleign thru holes in Shelf Supports on Metal
Frame to the threaded inserts in shelt. Attach shelf in 4 places using 20 MM Bolt (E)
Adhere Felt Pad (G) on bottom of 4 feet.
TIGHTEN ALL BOLTS FIRMLY AT THIS TIME.
CARE
Clean with mild soap and wipe dry.
REPLACEMENT PARTS
Please do not contact the company you purchased from as we can help you faster.
Order replacement parts and hardware at "alaterrefurniture.com"
A
D&F
A