Alaterre Furniture Bathroom 20x36" Wall Storage User manual

Alaterre Furniture
Bathroom 20x36" Wall Storage
Thank you for purchasing the Bathroom 20x36" Wall Storage from ALATERRE FURNITURE. We have
found it helpful to have a second person present during the assembly process.
10/18/2018 1 of 3 20x36" Wall Storage
NO. DRAWING DESCRIPTION QTY
AMETAL FRAME 2
B4
SHELF
NO. DRAWING DESCRIPTION QTY
16
M6x35MM BOLT
1
ALLEN KEY
D6
4x60MM SCREW
C
E
Wall Storage Assembly Instructions
Parts
6
FDRYWALL EZ
ANCHOR

10/18/2018 2 of 3 20x36" Wall Storage
Step 1
Read through these instructions thoroughly before beginning assembly. We have found this to be of
great value when assembling this product.
Step 2
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non
abrasive surface to prevent damage to the finish
Step 3
Lay Metal Frame Assembly (A) on a non abrasive surface. Attach Shelf (B) to Metal Frame (A) using
16-M6x35MM Hex Bolts (C). NOTE: TIGHTEN ALL BOLTS AT THIS TIME !
C
E
C
E
C
E

10/18/2018 3 of 3 20x36" Wall Storage
Step 4
D
CARE
Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.
REPLACEMENT PARTS:
For best service, to order replacement parts go to www.alaterrefurniture.com. Use the order form on the
website to order your replacement parts. Thank You!
Position Wall Storage in desired location. Mark holes where metal frame will be attach to wall. If possible,
attach the Wall Storage to a stud (when possible) behind drywall using 6-4x60MM Wood Screws (D).
NOTE: If hole locations do not align with stud, install the Drywall EZ Anchors (F). Tap the EZ Anchor into
the drywall up to the thread. Using a Phillips head screw driver, secure the EZ Anchor in the drywall at
the desired locations. Attach the Wall Storage to the EZ Anchors using 6-4x60MM Wood Screws.