Alaterre Furniture Savannah 30 Console User manual

7/10/17 1 of 2 30" & 40" Console
Step 1
Step 2
Alaterre Furniture
Savannah 30 & 40" Console
Thank you for purchasing the Savannah Console from ALATERRE FURNITURE. We have found it
helpful to have a second person present during the assembly process.
Console Assembly Instructions
Parts
Read through these instructions thoroughly before beginning assembly. We have found this
to be of great value when assembling this product.
F
G
E
12
M6*45MM
BOLT
D
QTY.DRAWING DESCRIPTIONNO.
1

7/10/17 2 of 2 30" & 40" Console
Step 3
Step 4
CARE
For best service, to order replacement parts go to www.alaterrefurniture.com. Use the order form
on the web site to order your replacement parts. Thank You!
Remove all parts and hardware from packing material. Wooden pieces should be placed on a
non abrasive surface to prevent damage to the finish.
Remove the Drawers from Top Assembly (A). Lay Top Assembly (A) upside down on a non
abrasive surface. Attach 4 Posts (B) using 8-45MM Hex Bolts (D). NOTE: Do not tighen
firmly at this time.
Position Bottom (C) betweet Post (B) Attach Bottom using 4-45MM Hex Bolts (D). Note:
TIGHTEN ALL BOLTS AT THIS TIME! Set console upright. Attach wooden knob to
outside of drawer fronts. Insert the Drawers in to the Top Assembly.
Clean with a non abrasive cloth using a mild soap. Make sure to wipe dry.
REPLACEMENT PARTS: