ALAULM 01SNDK23-GREY User manual

If you have any questions about the outdoot dog cage, please feel free to contact us.
Customer Service Email: [email protected]
INSTRUCTION
IMPORTANT
PLEASE READ BEFORE YOU COMMENCE ASSEMBLY
Follow the guidelines in this user guide to ensure correct
assembly and care for this product.
01SNDK23-GREY
Outdoor Dog Cage

SPECIFICATIONS
01
118 inch
118 inch
70.9 inch

CATALOG
！
02
Catalog
Specifica�ons...........................................................................................................01
Before you begin.....................................................................................................03
Plan Ahead ................................................................................................................03
Exploded Views ......................................................................................................04
Part List......................................................................................................................05
Extra .........................................................................................................................08
How to Assemble Dog Cage .....................................................................................09

NOTICE
！
03
Before You Begin
Plan Ahead
Owner's Manual
Before beginning construction，check local building codes regarding footings，location and
other requirements.Study and understand this owner's manual.Important information and helpful
tips will make your construction easier and more enjoyable.
Assembly Instructions: Instructions are supplied in this manual and contain all
appropriate information for your building model.Review all instructions before you begin
and during assembly，follow the step sequence carefully for correct results.
Parts and Parts List:Check to be sure that you have all the necessary parts for building.
Separate contents of the carton by the part number while reviewing parts list.
The first few steps show how to join related parts to make larger sub-assemblies which will be
used later.
Familiarize yourself with the hardware and fasteners for easier use during construction.
These are packaged within the carton. Note that extra fasteners have been supplied for your
convenience.
Watch the Weather: Be sure the day you select to install your building is dry and calm
Do not attempt to assemble your building on a windy day.
Teamwork:Whenever possible，two or more people should work together to assemble
your building One person can position parts or panels while the other is able to handle the
fasteners and the tools.
Tools and Materials:These are some basic tools and materials you will need for the
construction of your building. Decide which method of anchoring and the type of foundation
you wish to use in order to form a complete list of the materials you will need.

04
EXPLODED VIEWS
B
J1 K3
A
A
B
B
BB
B
B
B
B
B
D
B
D
B
A
E
A
AAA
A
A
A
A
G
F
BC
BB
BB
B
C
B
B
B
I
B
AA
AA
A
I
A
A
HHH
J1 J1 J1
K2 K1 K1 K2 K3 K2 K2 K3
J1 K2 K2J1 J1 J1
K2
K2
K4
K2 K2
K2
K2
K4
K4
K4
K5
K1
K1
K5
K3
K2
K2
K5 K5
J2 K5
K5
J3 J3 J2

05
Door corner connector 4PCS
K1
14PCSTee connectors
K2
PART LIST
PARTS LIST
Part Description Description
18PCS124.3CM Rods
96.5CM Rods
96.5CM Rods
50CM Rods
Corner connectors
Top bezel connector
96.5CM Rods
89CM Rods
Door frame support bar
2PCS
2PCS
1PC
1PC
22PCS
A
B
C
D
E
Right door frame bar
F
1PC
Right door frame support bar
G
2PCS
2PCS
3PCS
8PCS
H
I
J1
J2
Qty
2PCSTop middle connector
J3

06
PART LIST
PARTS LIST
Part Description Description
Corner clips
Binaural Clips
Pull Cord
Bolt M6*15
Bolt M6*35
Four-way corner connector
Four-way connectors
Door Fence
6PCS
1PC
11PCS
4PCS
4PCS
K4
K5
L1
Fencing
L2
108PCSMonaural Clips
M1
Tee corner connector
K3
M2
18PCS
40PCS
168PCS
234PCS
12PCS
M3
N
O
P
Qty
M6 402PCS
Open-end wrench 3PCS
Q
R
3PCSUniversal wrench
S

1. Please ensure that all accessories are complete before starting the
installation.
2. Due to the variety of accessories, many accessories may be glued
together, please check carefully
3. If any accessories are missing or damaged, please contact the
seller immediately.
E-Mail:
[email protected]
07
PART LIST
PARTS LIST
Part Description Description
Ground nails
Hole Cover
12PCS
8PCS
U
V
1PCCoverT
Qty

EXTRA
08
EXTRA
Part Description Description
Corner clips
Binaural Clips
Pull Cord
Bolt M6*15
Bolt M6*35
5PCSMonaural Clips
M1
M2
2PCS
3PCS
10PCS
10PCS
2PCS
M3
N
O
P
Qty
M6 20PCS
Q
WARNING:Failure to locate parts in accordance with these diagrams,
or failure to use special parts provided with this equipment, may result
in property damage or personal injury.
Hole Cover 2PCS
V

Installation steps
09
B
K3 PQ
K2 M6*35 M6
B
B
B
B
B
K3 K2
BB
B
B
B
B
AAAA
A
A
A
A
A
A
G
E
B
K2
K2
K2
K2
K3
K2
K3
K2
K2
K3
Step 1:Connect the bottom frame rod(B) with a tee connector(K2) and
a corner tee connector(K3).
NOTE:Do not tighten the screws all the way.
Step 2:Insert the support rod(A, E and G) against the connector and
connect with screws(P).
NOTE:Please tighten all screws.
x12
x8 x4 x24 x24
AE
PQ
GM6*35 M6
x10
x1 x12 x12
x1
Note: The screw holes of the K3
connector are facing the direction
of the door.

Installation steps
10
K5
B
B
B
B
C
B
B
B
B
B
CB
K2
K2
K2
K5
K4
K4
K5
K2 K2 K2 K5
K4
K4
Step 3:Connect the upper top frame connecting rod(B and C) with a
multi-interface connector(K2, K4 and K5) and screws(P).
NOTE:Do not tighten the screws all the way.
Step 4:Insert the top bezel connector(J2) into the long bar(A) and
connect with screws(P).
NOTE:Please tighten all screws.
x6
x40
BC
K5 PQ
K4 M6*35 M6
x10
x4
K2
x4 x40
x2
AJ2
PQ
M6*35 M6
x4
x4 x4
x2
A
A
J2

Installation steps
11
QJ1 M6
Step 5:Insert the corner connectors(J1) into the long bar(A) and
connect with screws(P).
NOTE:Please tighten all screws.
Step 6:Insert the top middle connector(J3) into the long bar(A) and
connect with screws(P).
NOTE:Please tighten all screws.
x4 x4
AJ3
Q
PM6*35 M6
x4
x4
PM6*35 x4
x4
x2
A
A
A
J3
J1

Installation steps
12
QJ1 M6
Step 7:Insert the corner connectors(J1) into the long bar(A) and
connect with screws(P).
NOTE:Please tighten all screws.
Step 8:Connect the roof edge frame and the support bar(I) with a
four-way corner connector(K5).
NOTE:Do not tighten the screws all the way.
x4 x4
IK5
Q
PM6*35 M6
x2
x6
PM6*35 x4
x6
x2
A
A
A
I
J1

13
Installation steps
QH M6
Step 9:Connect the assembled side canopy parts and the middle
canopy parts with connecting rods(H).
NOTE:Please tighten all screws.
Step 10:Insert the assembled canopy parts into the connecting rod(H)
and connect them with screws(P).
NOTE:Please tighten all screws.
x2 x6PM6*35 x6
QH M6
x1 x4PM6*35 x4
A
A
A
A
A
A
A
A
A
A
A
A
H
H
H
H

14
Installation steps
QM6
Step 11:Insert the assembled canopy into the top connector of the
frame and attach it with screws(P).
NOTE:Please tighten all screws.
Step 12:Connect the horizontal rod of the door frame(D) and the right
door frame bar(F) with door corner connector(K1).
NOTE:Do not tighten the screws all the way.
x10PM6*35 x10
K1
DF
PQ
K1 M6*35 M6
x2
x2 x4
x1
x4
D
D
F

15
Installation steps
Step 13:Connect door frames with door corner connector(K1).
NOTE:Lift the right door frame rod to the highest, then lock the left s
crew and adjust until the door frame can be completely closed.
Please tighten all screws.
Step 14:Place the ground nails(U) in the middle of the bottom frame
bar and insert it into the ground.
NOTE:Do not insert the nails completely into the ground, and no nails
are needed under the door frame.
Ux12
PQ
K1 M6*35 M6
x2 x4 x4

16
Installation steps
Step 15:Attach the monaural clips(M1) to the frame bar with long
screws(P).
NOTE:Do not tighten the screws all the way.
Step 16:Clamp the fencing with the monaural clips and lock it with
short screws(O).
NOTE:Do not tighten the screws all the way.
QL2 M6
x11 x44OM6*15 x44
PQ
M1 M6*35 M6
x48 x48 x48