Albion ABH200C Guide

OPERATING MANUAL AND USER GUIDE
!ABH200C!&!ABH300H
www.albionamps.com
ABH300H.indd 1 2011-5-5 18:34:05

ABH300H.indd 2 2011-5-5 18:34:05

Contents
Important Safety Instructions ...................................................................................... 1
Important Warnings ....................................................................................................... 2
Designer's Introduction................................................................................................. 3
2XWOLQH6SHFL¿FDWLRQ ..................................................................................................... 3
ABH200C & ABH300H Features and Controls ............................................................ 4
Rear Panel....................................................................................................................... 5
6SHFL¿FDWLRQ................................................................................................................... 6
ABH300H.indd 3 2011-5-5 18:34:05

OPERATING MANUAL AND USER GUIDE
&
Important Safety Instructions
1. Read these instructions – All the safety and operating
instructions should be read before this product is
operated.
2. Keep these instructions – The safety and operating
instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance
and in the operating instructions should be adhered
to.
4. Follow all instructions – All operating and use
instructions should be followed.
5. Do not use this apparatus near water – The appliance
should not be used near water or moisture – for
example, in a wet basement or near a swimming pool
etc.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
LQFOXGLQJDPSOL¿HUVWKDWSURGXFHKHDW
9. Do not defeat the safety purpose of the polarized or
grounding plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the
SURYLGHGSOXJGRHVQRW¿WLQWR\RXURXWOHWFRQVXOWDQ
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket or
WDEOHVSHFL¿HG E\ WKHPDQXIDFWXUHURUVROGZLWK WKH
apparatus. When a cart or rack is used, use caution
when moving the cart/ apparatus combination to
avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when
unused for long periods of time.
5HIHUDOOVHUYLFLQJWRTXDOL¿HGSHUVRQQHO6HUYLFLQJLV
required when the apparatus has been damaged in
any way including: power supply cord or plug damage,
liquid spillages, objects falling into the unit, exposure
to rain/moisture or impact damage.
15. Please keep the unit in a well ventilated environment.
16. CAUTION: These servicing instructions are for use
by qualified service personnel only. To reduce the
risk of electric shock, do not perform any servicing
other than that contained in the operating instructions
XQOHVV\RXDUHTXDOL¿HGWRGRVR
:$51,1*7RUHGXFHWKHULVNRI¿UHRUHOHFWULFVKRFN
do not expose this apparatus to rain, moisture and
dripping or splashing of liquids. Containers filled
with liquids such as vases or drinks should never be
placed on top of or near the unit.
18. WARNING: The mains plug/appliance coupler is used
as disconnect device, the disconnect device shall
remain readily operable.
7KHOLJKWQLQJÀDVK ZLWKDUURZKHDGV\PEROLVWRDOHUW
the user to the presence of non-insulated "dangerous
voltage" within the product's enclosure that may be
RIVXI¿FLHQWPDJQLWXGHWRFRQVWLWXWHDULVNRIHOHFWULF
shock.
-Warning: To reduce the risk of electric shock, do
QRWUHPRYHFRYHURUEDFNDVWKHUHDUHQRXVHU
VHUYLFHDEOH SDUWV LQVLGH5HIHUVHUYLFLQJWR TXDOL¿HG
personnel.
1
ABH300H.indd 4 2011-5-5 18:34:05

series
&
- The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance instructions in
the literature accompanying the appliance.
20. Protective earthing terminal. The apparatus
should be connected to a mains socket outlet with a
protective earthing connection.
21. Correct Disposal of this product. This marking
indicates that this product should not be disposed
with other household wastes throughout the EU. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was purchased.
They can take this product for environmentally safe
recycling.
22. WARNING: The terminals marked with the symbol of
“ ” may be of sufficient magnitude to constitute a
risk of electric shock. The external wiring connected
to the terminals requires installation by an instructed
person or the use of ready-made leads or cords
according to manufacturer’s instruction.
³&ODVV :LULQJ³IRUDOO RWKHU 7(50,1$/6 SURYLGHG
the audio output power exceeds 10W per channel
under normal operating conditions or the apparatus is
LQWHQGHG WREHLQVWDOOHGRULQWHUFRQQHFWHGLQWKH¿HOG
E\D6.,//('3(5621
Important Warnings
$/:$<6 UHDG WKH PDQXDO RI \RXU QHZ DPSOLILHU ±
HYHQLI\RXDUHH[SHULHQFHGZLWKJXLWDUDPSOL¿HUVDQG
their technology! There could be something important
that you need to know.
$/:$<6FKHFNWKDW\RXUQHZDPSOL¿HULVVXLWHGWRWKH
mains power supply in your country.
1(9(5 GLVFRQQHFW WKH HDUWK JURXQG FRQQHFWLRQ
from your amplifier. It is there to prevent you from
receiving a fatal electric shock!
NEVER use your amplifier equipment in a high
PRLVWXUHHQYLURQPHQWVXFKDVUDLQRUDOORZLWWRJHW
wet.
$/:$<6 XVH FRUUHFWDQG ZHOO PDLQWDLQHGFDEOHV IRU
all inter-connections whether for power, speaker or
signal connections. If in any doubt, get them checked
or renew immediately.
1(9(5 XVH\RXUDPSOL¿HUSURGXFWVZLWK DQ\ FRROLQJ
vents covered, even partially. Your amp loves being
fed nice cool air!
3$57,&8/$5/< ZLWK YDOYH WXEH DPSV DOORZ \RXU
amp to warm up before playing, 5 minutes is a
good length of time. Also allow your amp to have a
good cool down after playing and before moving it,
especially into the back of a car on a cold winter’s
night! Your valves will last longer if you give them a
little respect and TLC. Valves are pretty tough when
you think of what they are made from – but can be
very fragile if treated with physical abuse.
$/:$<6XVHDFDEOHUDWHGIRUORXGVSHDNHUFRQQHFWLRQ
XVHIRUFRQQHFWLQJ\RXUDPSOL¿HUWR\RXUORXGVSHDNHU
system. DO NOT use a screened guitar cable for
speaker use.
NEVER use your amplifier without it connected to a
suitable matched loudspeaker system.
:$51,1* 6RPHWLPHV SDUWV RI WKH RXWVLGH RI \RXU
DPSOL¿HUPD\JHWKRWWRWKHWRXFK7KLVLVTXLWHQRUPDO
and will be within safe operational limits. These
limits are set by various countries safety approvals
committees, and we at Albion Musical Instruments
design, build, test, and have approved our products to
WKHVH LQWHUQDWLRQDOVWDQGDUGV,H&(8/&6$&%
ETL etc.
EMC INTERFERENCE. Even though all Albion
Musical Instruments products are designed and
tested to international electro-magnetic interference
standards, please note that cellular phones in close
proximity may cause some interference with your
DPSOL¿HU
$/:$<6KDYH\RXUDPSOL¿HUVHUYLFHGE\DWHFKQLFLDQ
qualified in servicing musical instrument amplifier
products. If in doubt please contact your dealer.
2
ABH300H.indd 5 2011-5-5 18:34:06

OPERATING MANUAL AND USER GUIDE
&
Designer's Introduction
'HVLJQLQJWKH$%+UDQJHRIEDVVDPSVDQGFDELQHWVKDV
been a great pleasure for me. When I finally started to
play the prototypes I immediately knew my team had done
a great job, to any designer of any product THAT moment
is pretty awesome, believe me. My aim of creating new
bass products with, what I think is, great style, massive
punch, warmth yet with clear tonality, and without having
to mortgage your home, had become reality. The bass
PDUNHWLVYHU\FRPSHWLWLYH¿OOHGZLWKPDQ\GLIIHUHQWLGHDV
and products, and for Albion Musical Instruments to make
its impact on that market meant that our products had to
be pretty special; after the initial launch at Music Messe
2010 and the comments that people had about the range,
including those from some pretty impressive bass players,
I knew we had made something special. I hope that you
agree with that!
Thank you
2XWOLQH6SHFLÀFDWLRQ
7KH $%+& DQG $%++ DPSOLILHU FLUFXLW XWLOL]HV
a combination of technologies to provide optimum
performance required for high class consistent playing
QLJKWDIWHUQLJKW%RWKDPSOLILHUVXVH WKHVDPHFLUFXLWU\
only differing in the power supply transformer values to
provide the required power output.
The main preamplifier and tone forming circuit section
uses 2 double triode low noise 7025/12AX7/ECC83 valves
WXEHVLQFOXGLQJWKH%DVVDQG7UHEOH(4FLUFXLWVUXQQLQJ
from a 380 volt HT power supply and DC heaters. The
output from the valve preamp circuit then passes through
the Mid circuit, which is separate from the preamp. This
mid circuit uses a very special high voltage operational
amplifier circuit in order to pass the valve tone from the
preamp to the power amp without adding extra unwanted
colouration. All it does is change the mid frequency
spectrum.
The power amplifier stage is an extremely rugged but
very musical bipolar transistor design that delivers the
wide range response required for the punch and wide
bandwidth required by today’s bass players. The power
stage is pretty much OVER-engineered to maintain
night after night of high level bass guitar playing without
compromise. As mentioned above, the power stage is
very musical, it has a very sweet tone and handles being
pushed into distortion (which is a very big test on any
EDVV SURGXFW ZLWK HDVH DQG ZLWKRXW DQ\ XOWUD KDUVK
unpleasantness – it really delivers the goods with what
ZHWKLQNLVDSUHWW\VXSHUEVRXQGOHYHO63/IRUDQG
300 watt bass rigs. To keep things cool, the power amp
is thermostatically fan cooled on a very large heatsink
– another example of our over-engineering. As with the
other power items the power transformer is also larger
than what other manufacturers put in their comparative
EDVV DPSV :K\" %HFDXVH LW KHOSV GHOLYHU WKH ORZHVW
notes without batting an eyelid! It doesn’t run out of
steam!! And also helps keep things very cool (except for
the preamp valves of course!
7KH $%+& DQG $%++ DPSOLILHUV KDYH D SUHWW\
impressive array of switchable options that make for a
very versatile bass system, covering gain variations for
both active and passive guitars, external Tuner connection
with panel and footswitchable muting for silent tuning, plus
some very neat preset tone contouring options.
2XU (4 V\VWHP RI%DVV0LGGOH DQG7UHEOH PD\ VHHP
pretty simple, but each control has a 3-position rotary
switch selecting different frequency bands that give a very
ZLGHUDQJHRI(4RSWLRQV
7KHVLJQDOKDQGOLQJ FDSDELOLWLHVRI$%+EDVVDPSV SXWV
you in control of the dynamics that you want - be it from
clean, warm Jazz, through to overloaded Rock bass
styles. Our bass amps and speaker systems are designed
to deliver and handle them all.
7KH $%+&FRPERFRPHVFRPSOHWH ZLWKWZRRI RXU
own custom designed and built Albion 10” bass guitar
loudspeakers wired in parallel for 8ohm operation. These
speakers are specially designed for this combo, enabling
it to deliver great low end from a small cabinet.
$GGHG WR WKLV LV RXU DJDLQ GHVLJQHG DQG EXLOW E\ XV
High Frequency Angular Titanium Horn and Hifi grade
crossover network. This very special HF unit has a unique
angular dispersion pattern that projects upwards towards
the player’s hearing, as well as directly ahead towards
WKH DXGLHQFH 2Q LWV RZQ WKH $%+& FRPER KDV D
very fine full range bass guitar response beyond that
of its relatively small size, perfect for small club stages
and ease of transportation. On the back of the cabinet
LV DSDVVLYH 6XE:RRIHURXWSXWMDFNVRFNHW ZLWKEXLOWLQ
+] FURVVRYHU QHWZRUN 7KLV DOORZV WKH$%+&WR
3
ABH300H.indd 6 2011-5-5 18:34:07

series
&
EH VWDFNHG RQWRS RI WKH$OELRQ%/6FDELQHWVSOLWWLQJ
the system into a 3-way bass system for increased bass
response and wider spread when required, but still making
a compact transportable system.
ABH300H.indd 7 2011-5-5 18:34:07

ABH200C & ABH300H Features and Controls
INPUT – Mono ¼”Jack socket for instrument input. Use a
properly screened “guitar” cable for interconnection. There
are many different makes of guitar cable available, ranging
from fairly inexpensive to very expensive. Each have
different characteristics, and depending on your particular
guitar will give different results, so experimentation and
help from your dealer is the best advice we can give.
-10dB INPUT PAD – normally the input jack connects
GLUHFWO\WRWKHLQSXWJULGRIWKH¿UVWYDOYHDPSOLI\LQJVWDJH
DW KLJK LPSHGDQFH 0HJRKP 7KLV LV WKH VZLWFK RXW
position, and is suitable for most purposes. However,
in the case of high output active guitars and preamps,
the signal level may be too high for the input stage to
KDQGOH ZLWKRXW GLVWRU WLQJ %\ SUHVVLQJ WKH G% 3$'
VZLWFK,1 WKHLQSXW FLUFXLWLVUHFRQ¿JXUHGWRDDWWHQXDWH
WKH LQFRPLQJ VLJQDO E\ G% DQG E DGMXVW WKH LQSXW
impedance to a more suitable value for active guitars
DSSUR[.RKP
INPUT GAIN BOOST – on the other hand, the input
stage may not be “hot” enough for your liking and you
want to use the valve preamp’s natural overdrive tone –
VLPSO\SUHVV,1WKH,QSXW*DLQ%RRVWVZLWFK3OHDVHQRWH
WKDW ERWK WKH G% DQG *DLQ %RRVW VZLWFKHV ZRUN LQ
conjunction with the rotary GAIN control.
TUNER MUTE – by pressing this switch the output of
WKHDPSOL¿HULVPXWHGH[FHSWIRUWKHWXQHURXWMDFNVRFNHW
on the back panel, thus allowing for silent tuning. The
mute switch function is also available via a footswitch
jack mounted on the back panel (optional footswitch is
DYDLODEOH
GAIN – this control determines the amount of signal that
WKH¿UVWDPSOL¿HUJDLQVWDJHOHWVWKURXJKWRWKHUHVWRIWKH
DPSOL¿HU,WLVSUHWW\VWUDLJKWIRUZDUGLQXVH±ORZHUVHWWLQJV
are clean – high mid settings are in the start of distortion
range – and high settings are in the overdrive range.
EQUALISATION STAGE
EQ CONTOUR EXPANSION SWITCHES – WKH(4
V\VWHP RI WKH $%+ EDVV V\VWHP LV YHU \ ZLGH UDQJLQJ
and very versatile in its own right, but the use of the four
expansion pushswitches opens up even more possibilities.
LOW CUT – when pushed in, this switch activates a high
SDVV¿OWHUV\VWHPWKDWUROOVRIWKHYHU\ORZIUHTXHQFLHVLQ
the preamp circuit which is used to tighten up the sound
when the preamp is required to be pushed into “overdrive”
for heavy rock playing styles. This helps the sound to
retain punch and drive without being swamped by the very
low frequencies which can become “muddy”.
LOW BOOST – FRQYHUVHO\ WKH /RZ %RRVW VZLWFK
UHFRQ¿JXUHVWKH LQSXWVWDJHFLUFXLWWRERRVW WKHYHU\ ORZ
frequencies in a very warm and musical way.
HIGH BOOST – as its name implies this switch boosts
the high frequencies adding great “presence” and “cut”
required for modern bass playing styles. It adds “snap”
without adding harshness.
EQ DEPTH – working in conjunction with the Treble
DQG%DVV(4FLUFXLWWKLVVZLWFK LQWURGXFHVDQH[WUDG%
FXWWRWKHPLGIUHTXHQFLHVWKXVH[SDQGLQJWKH(4WRQDO
capabilities.
BASS & TREBLE EQ ROTARY CONTROLS &
RANGE SWITCHES – although the Treble and bass
(4FLUFXLWLVYDOYHGULYHQLWLVRIWKHFXWDQGERRVWYDULHW\
DQG WKHUHIRUH LV IODW LQ WKH PLG SRVLWLRQ %RWK FRQWUROV
are fitted with a 3-position rotary RANGE switch which
selects differing component values for different frequency
VORSHV $%& WKXV H[SDQGLQJ WKHHIIHFWLYHQHVV RI WKH
(4WRWDLORU\RXUVRXQGWRVXLW\RXUSOD\LQJVW\OHDQGEDVV
guitar. Experimenting with these controls is advised.
MIDDLE EQ ROTARY & RANGE SWITCH – as
stated earlier the Middle circuit is after the valve preamp,
and again is of the cut and boost variety. The Range
switch varies the Mid centre frequency between 400Hz,
+] DQG N+] %HFDXVH LW LV LQGHSHQGHQW RI WKH
SERIES EFFECTS LOOP
LEVELRETURN SEND
BYPASSLOOP
ROUTE
LOW HIGH
LOUDSPEAKER OUTPUT SOCKETS
PARALLEL CONNECTED SOCKETS - INTERNAL LOUDSPEAKER = 16ohms
WARNING! DO NOT USE WITHOUT CONNECTING
LOUDSPEAKER LOAD TO AMPLIFIER AND MATCHING
OUTPUT IMPEDANCE TO SPEAKER IMPEDANCE.
16ohm OUT = 1 x 16ohm LS, 8ohm OUT = 1 x 8ohm OR 2 x 16ohm LS
OUTPUT = 35 Watts RMS into 8 or 16 ohms
DO NOT CONNECT ANY UNBALANCED GROUND CONNECTED EQUIPMENT
TO THE OUTPUT OF THIS AMPLIFIER. USE UN-GROUNDED DIFFERENTIAL
MODE ONLY. IF IN DOUBT REFER TO USER MANUAL
35 WATT TWIN CHANNEL VALVE GUITAR AMPLIFIER
FOOTSWITCH
CONNECTOR
8ohm
16ohm
HT FUSE
MAINS INPUT
T315mAL 250VT1.6AL 250V
WARNING! USE CORRECT FUSE ONLY
POWER MUTE 100% PHASE +
ACTIVE 33% PHASE -
MAINS
ON POWER OUTPUT
MASTER REVERB
OUTPUT MIX F'BK
POWER AMP RESPONSE
DEEP EDGE
MIX LOWER
1
2
3
46
7
8
9
MIX HIGHER 0
1
2
3
46
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10
0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10
VOLUME TREBLE MIDDLE BASS DRIVE GAIN
TIGHT
SMOOTH
SHIFT
TIGHT
LOOSE
INPUT
CHANNEL A - PRE EQ
CHANNEL B - POST EQ
A-B MIX
PRESS BOTH
FOR REMOTE
OPERATION
0
1
2
3
456
7
8
9
10
55
A-B/MIX
BALANCE
SERIES EFFECTS LOOP
LEVELRETURNSEND
BYPASS LOOP
ROUTE
LOW HIGH
LOUDSPEAKER OUTPUT SOCKETS
PARALLEL CONNECTED SOCKETS
WARNING! DO NOT USE WITHOUT CONNECTING
LOUDSPEAKER LOAD TO AMPLIFIER AND MATCHING
OUTPUT IMPEDANCE TO SPEAKER IMPEDANCE.
16ohm OUT = 1 x 16ohm LS, 8ohm OUT = 1 x 8ohm OR 2 x 16ohm LS
OUTPUT = 100 Watts RMS into 8 or 16 ohms
DO NOT CONNECT ANY UNBALANCED GROUND CONNECTED EQUIPMENT
TO THE OUTPUT OF THIS AMPLIFIER. USE UN-GROUNDED DIFFERENTIAL
MODE ONLY. IF IN DOUBT REFER TOUSER MANUAL
100 WATT TWIN CHANNEL VALVE GUITAR AMPLIFIER
FOOTSWITCH
CONNECTOR
OUTPUT BIAS ADJUST SYSTEM
WARNING! DO NOT REMOVE COVER
8ohm
16ohm
HT FUSE MAINS INPUT
T1AL 250V T2.5AL 250V
WARNING! USE CORRECT FUSE ONLY
CAUTION! NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED TECHNICIAN
SERIES EFFECTS LOOP
LEVELRETURN SEND
BYPASSLOOP
ROUTE
LOW HIGH
LOUDSPEAKER OUTPUT SOCKETS
PARALLEL CONNECTED SOCKETS
WARNING! DO NOT USE WITHOUT CONNECTING
LOUDSPEAKER LOAD TO AMPLIFIER
OUTPUT = 200 Watts RMS into 8ohms - 300 Watts RMS into 4ohms
DO NOT CONNECT ANY UNBALANCED GROUND CONNECTED EQUIPMENT
TO THE OUTPUT OF THIS AMPLIFIER. USE UN-GROUNDED DIFFERENTIAL
MODE ONLY. IF IN DOUBT REFER TO USER MANUAL
MAINS INPUT T3.15AL 250V
WARNING! USE CORRECT FUSE ONLY
TUNER
FOOTSWITCH
MUTE OUT
LINE OUT
GROUND
CONNECT
ISOLATE
300Watt TUBE PRE/BIPOLAR POWER BASS AMPLFIER
WARNING! DO NOT USE LOAD OF LESS THAN 4ohm IMPEDANCE
series
4
&
ABH300H.indd 8 2011-5-5 18:34:19

7UHEOHDQG%DVVFLUFXLWVHYHQELJJHUYDULDWLRQVLQKRZWKH
middle frequencies react are possible.
OUTPUT VOLUME – this quite simply controls the
output of the preamp, giving you the required sound level
and balance that you require.
ACTIVE SWITCH – WKLV LV SULPDULO\D 6WDQGE\VZLWFK
and turns the HT supply on or off to the valve preamp
circuit.
MAINS POWER SWITCH – this is self explanatory
in that it turns the mains power supply coming into the
DPSOL¿HURIIRURQ
Rear Panel
TUNER OUT & MUTE FOOTSWITCH – as stated
earlier regarding the Tuner Mute front panel switch, your
tuning device can be connected here and, if required,
D$OELRQVLQJOHIRRWVZLWFK RSWLRQDOO\DYDLODEOHFDQEH
plugged in to facilitate remote operation.
SERIES EFFECTS LOOP – WKLVFRQVLVWVRIWKH6HQG
and Return jack sockets, Level switch and Route switch.
7KH6HQGVRFNHWVXSSOLHVWKHSUHDPSRXWSXWVLJQDOWR
feed the input of your remote effects system, whilst the
Return socket connects the output of your effects back
into the amplifier circuit. Please remember that the loop
is of the “series” type, so that the entire signal is sent and
returned back to the amplifier. The Level switch has Low
and High settings, the setting of this will be determined
by the performance quality of your effects system. Low
LVQRPLQDOO\DORRSOHYHORIG%9DQG+LJKLVQRPLQDOO\
0dbV. Experiment with the Level switch to see what suits
your system best.
Effects Loops in general are designed to work with rack
W\SHSURFHVVRUVUDWKHUWKDQÀRRUVWRPSER[HV7KHUHDVRQ
for this is that most floor pedals do not have enough
headroom to let the signal pass through without causing
the signal to distort unduly. Also loops are designed for
unity-gain systems (i.e. what goes in, comes back out at
WKHVDPHDPRXQWRIJDLQDQGVLJQDOOHYHODQGDUHEHVW
suited for time based processors like chorusing and delays,
JUDSKLF(4DQGVWXGLRW\SHFRPSUHVVRUV'H¿QLWHO\GRQRW
SXWJDLQW\SHSHGDOVGLVWRUWLRQRYHUGULYHHWFLQWKHORRS
– it really will not sound good, and be very, very noisy! If
you have a good floor type processor, then by all means
experiment for your time delay type effects – use the low
level – it may work, it may not!
7KH5287(VZLWFKZKHQVHWWR%\SDVVGLVDEOHVWKH/RRS
circuit if not being used, which is best practise if not using
the effects loop.
LINE OUT – the Line Out jack is fed post preamp and
post FX Loop. It is an unbalanced signal for connection into
RWKHUSRZHUDPSOL¿HUVDQGDOVRIRUFRQQHFWLRQWRD',ER[
for feeding into a PA system/recording system, etc. The
ground switch will either connect the output jack’s ground
GLUHFWO\WRWKH$%+EDVVDPS¶VVLJQDOJURXQGRULIUHTXLUHG
to defeat ground loops, will lift the ground via a ground lift
network.
LOUDSPEAKER OUTPUTS – $%++LV¿WWHGZLWK
FRPELQHG6SHDNRQ-DFNFRQQHFWRUVZLUHG LQSDUDOOHO
7KHPD[LPXPORDGLQJRQWKHDPSOL¿HULVRKPVKHQFHGR
not connect to any speaker system whose total impedance
is less than 4 ohms!
7KHPDWFKLQJ$OELRQEDVVORXGVSHDNHUFDELQHWV%/6
%/6%/6DUHDOORKPFDELQHWVWKHUHE\DOORZLQJ
the use of up to 2 cabinets at any time.
7KH$%+&[´FRPERLVILWWHGZLWKWZRRKP
ORXGVSHDNHUVLQSDUDOOHOIRURKPRSHUDWLRQ,WLVDOVR¿WWHG
ZLWKD+)KRUQV\VWHPDVPHQWLRQHGHDUOLHU,WGRHVQRW
KDYHDQ\¿WWHGH[WHUQDOORXGVSHDNHUFRQQHFWRUVEHFDXVHLW
is designed to deliver the maximum power into its internal
VSHDNHUV\VWHP7KHRQO\H[FHSWLRQLVWKH6XE:RRIHU
output connector mounted on the rear of the cabinet.
This is an 8 ohm only output and is fed via a passive
SERIES EFFECTS LOOP
LEVELRETURN SEND
BYPASSLOOP
ROUTE
LOW HIGH
LOUDSPEAKER OUTPUT SOCKETS
PARALLEL CONNECTED SOCKETS - INTERNAL LOUDSPEAKER = 16ohms
WARNING! DO NOT USE WITHOUT CONNECTING
LOUDSPEAKER LOAD TO AMPLIFIER AND MATCHING
OUTPUT IMPEDANCE TO SPEAKER IMPEDANCE.
16ohm OUT = 1 x 16ohm LS, 8ohm OUT = 1 x 8ohm OR 2 x 16ohm LS
OUTPUT = 35 Watts RMS into 8 or 16 ohms
DO NOT CONNECT ANY UNBALANCED GROUND CONNECTED EQUIPMENT
TO THE OUTPUT OF THIS AMPLIFIER. USE UN-GROUNDED DIFFERENTIAL
MODE ONLY. IF IN DOUBT REFER TO USER MANUAL
35 WATT TWIN CHANNEL VALVE GUITAR AMPLIFIER
FOOTSWITCH
CONNECTOR
8ohm
16ohm
HT FUSE
MAINS INPUT
T315mAL 250VT1.6AL 250V
WARNING! USE CORRECT FUSE ONLY
POWER MUTE 100% PHASE +
ACTIVE 33% PHASE -
MAINS
ON POWER OUTPUT
MASTER REVERB
OUTPUT MIX F'BK
POWER AMP RESPONSE
DEEP EDGE
MIX LOWER
1
2
3
46
7
8
9
MIX HIGHER 0
1
2
3
46
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10
0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10 0
1
2
3
456
7
8
9
10
VOLUME TREBLE MIDDLE BASS DRIVE GAIN
TIGHT
SMOOTH
SHIFT
TIGHT
LOOSE
INPUT
CHANNEL A - PRE EQ
CHANNEL B - POST EQ
A-B MIX
PRESS BOTH
FOR REMOTE
OPERATION
0
1
2
3
456
7
8
9
10
55
A-B/MIX
BALANCE
SERIES EFFECTS LOOP
LEVELRETURNSEND
BYPASS LOOP
ROUTE
LOW HIGH
LOUDSPEAKER OUTPUT SOCKETS
PARALLEL CONNECTED SOCKETS
WARNING! DO NOT USE WITHOUT CONNECTING
LOUDSPEAKER LOAD TO AMPLIFIER AND MATCHING
OUTPUT IMPEDANCE TO SPEAKER IMPEDANCE.
16ohm OUT = 1 x 16ohm LS, 8ohm OUT = 1 x 8ohm OR 2 x 16ohm LS
OUTPUT = 100 Watts RMS into 8 or 16 ohms
DO NOT CONNECT ANY UNBALANCED GROUND CONNECTED EQUIPMENT
TO THE OUTPUT OF THIS AMPLIFIER. USE UN-GROUNDED DIFFERENTIAL
MODE ONLY. IF IN DOUBT REFER TO USER MANUAL
100 WATT TWIN CHANNEL VALVE GUITAR AMPLIFIER
FOOTSWITCH
CONNECTOR
OUTPUT BIAS ADJUST SYSTEM
WARNING! DO NOT REMOVE COVER
8ohm
16ohm
HT FUSE MAINS INPUT
T1AL 250V T2.5AL 250V
WARNING! USE CORRECT FUSE ONLY
CAUTION! NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED TECHNICIAN
SERIES EFFECTS LOOP
LEVELRETURN SEND
BYPASSLOOP
ROUTE
LOW HIGH
LOUDSPEAKER OUTPUT SOCKETS
PARALLEL CONNECTED SOCKETS
WARNING! DO NOT USE WITHOUT CONNECTING
LOUDSPEAKER LOAD TO AMPLIFIER
OUTPUT = 200 Watts RMS into 8ohms - 300 Watts RMS into 4ohms
DO NOT CONNECT ANY UNBALANCED GROUND CONNECTED EQUIPMENT
TO THE OUTPUT OF THIS AMPLIFIER. USE UN-GROUNDED DIFFERENTIAL
MODE ONLY. IF IN DOUBT REFER TO USER MANUAL
MAINS INPUT T3.15AL 250V
WARNING! USE CORRECT FUSE ONLY
TUNER
FOOTSWITCH
MUTE OUT
LINE OUT
GROUND
CONNECT
ISOLATE
300Watt TUBE PRE/BIPOLAR POWER BASS AMPLFIER
WARNING! DO NOT USE LOAD OF LESS THAN 4ohm IMPEDANCE
OPERATING MANUAL AND USER GUIDE
5&
ABH300H.indd 9 2011-5-5 18:34:32

OPERATING MANUAL AND USER GUIDE
&
+]FURVVRYHUV\VWHPIRUFRQQHFWLRQRID%/6´
bass cabinet for extended low frequency operation when
required.
MAINS INPUT – the mains input receptacle allows for
the connection of the mains power cord, and also houses
WKHPDLQVSRZHUIXVH7RFRPSO\ZLWK,QWHUQDWLRQDO6DIHW\
5HJXODWLRQVIRU\RXUVDIHW\DQGSURWHFWLRQ\RXUDPSOL¿HU
is supplied to work with the mains supply in your country.
3OHDVHFKHFNWKHZKLWHUDWLQJODEHO¿WWHGWRWKHEDFNSDQHO
If in any doubt, please check with your supplier. It is of
utmost importance to use the correct earthed and rated
SRZHUFRUGDVLVVXSSOLHGZLWK\RXUDPSOL¿HU
W A R N I N G ! D O N O T U S E W I T H O U T
CONNECTING THE EARTH (GROUND) WIRE.
In the case of the mains fuse blowing, this can be changed
by removing the power cord connector from the amplifier
receptacle and with the aid of a small screwdriver the small
drawer in the receptacle can be withdrawn allowing access
to the mains power Fuse.
WARNING! USE THE CORRECT REPLACEMENT
VALUE ONLY!
A WORD OF ADVICE about fuses – if a fuse blows
it is usually for a very good reason, it could be anything
from a voltage spike on the mains power, to a serious
malfunction of your amplifier. Fuses are there for your
protection – treat them with respect, and never replace with
the wrong value!
W A R N I N G ! D O N O T U S E W I T H O U T
CONNECTING THE EARTH (GROUND) WIRE.
W A R N I N G ! U S E T H E C O R R E C T
REPLACEMENT VALUE ONLY!
6SHFL¿FDWLRQ
$%++±ZDWW+HDG%DVV$PSOL¿HU
ZDWWV506RXWSXWLQWRRKPLPSHGDQFHORXGVSHDNHU
load.
ZDWWV506RXWSXWLQWRRKPLPSHGDQFHORXGVSHDNHU
load.
2 off 7025/12AX7/ECC83 double triode small signal valves
WXEHV
7KHUPRVWDWLFDOO\)DQDQGSDVVLYHFRROHG%-7SRZHURXWSXW
stage
0DLQV )XVH 9+]VXSSO\ 7$/WLPHODJ
250V rated 20mm glass fuse
0DLQV)XVH 9+]VXSSO\ 7$/WLPHODJ9
rated 20mm glass fuse
0DLQV)XVH 9+]VXSSO\ 7$/WLPHODJ9
rated 20mm glass fuse
0DLQV)XVH 9+]VXSSO\ 7$/WLPHODJ
250V rated 20mm glass fuse
:DUQLQJ:KHUHIXVHVVSHFL¿HGDUHUDWHGDW9SOHDVH
be aware that this is the rating of fuse value and NOT the
UDWLQJRI\RXUSDUWLFXODUDPSOL¿HU
'LPHQVLRQVPP :[+['
Weight = 13.2Kg
$%+&±ZDWW&RPER%DVV$PSOL¿HU
ZDWWV506RXWSXWLQWRRKPLPSHGDQFHORXGVSHDNHU
load.
2 off 7025/12AX7/ECC83 double triode small signal valves
WXEHV
7KHUPRVWDWLFDOO\)DQDQGSDVVLYHFRROHG%-7SRZHURXWSXW
stage
0DLQV)XVH 9+]VXSSO\ 7$/WLPHODJ
250V rated 20mm glass fuse
0DLQV)XVH 9+]VXSSO\ 7$/WLPHODJ9
rated 20mm glass fuse
0DLQV)XVH 9+]VXSSO\ 7$/WLPHODJ9
rated 20mm glass fuse
0DLQV)XVH 9+]VXSSO\ 7$/WLPHODJ
250V rated 20mm glass fuse
:DUQLQJ:KHUHIXVHVVSHFL¿HGDUHUDWHGDW9SOHDVH
be aware that this is the rating of fuse value and NOT the
UDWLQJRI\RXUSDUWLFXODUDPSOL¿HU
'LPHQVLRQVPP :[+['
Weight = 29.5Kg
CAUTION! There are no user serviceable parts mounted
inside your amplifier! Refer servicing to suitably qualified
personnel.
CAUTION!
There are no user serviceable parts mounted
LQVLGH\RXUDPSOL¿HU5HIHUVHUYLFLQJWRVXLWDEO\
TXDOL¿HGSHUVRQQHO
This means that for your own safety and the
correct performance of your amplifier, do not
open the chassis unless you really do know what
you are doing!
6
Warning! Where fuses specified are rated at
250V please be aware that this is the rating of
fuse value and NOT the rating of your particular
DPSOL¿HU
Warning! Where fuses specified are rated at
250V please be aware that this is the rating of
fuse value and NOT the rating of your particular
DPSOL¿HU
ABH300H.indd 10 2011-5-5 18:34:34

OPERATING MANUAL AND USER GUIDE
7&
ABH300H.indd 11 2011-5-5 18:34:34

OPERATING MANUAL AND USER GUIDE
&
,$*+RXVH6RYHUHLJQ&RXUW(UPLQH%XVLQHVV3DUN+XQWLQJGRQ&DPEV3(;8(QJODQG
www.albionamps.com
The information in this brochure is subject to change without notice.
All rights reserved © 2010 Albion. Albion is a member of the IAG Group.
ABH300H.indd 12 2011-5-5 18:34:35
This manual suits for next models
1
Table of contents
Other Albion Amplifier manuals
Popular Amplifier manuals by other brands

Soundchoice PROAudio
Soundchoice PROAudio CA2120 manual

WorkPro
WorkPro PA 120/2 PRO user manual

digital world
digital world ARC-016B user manual

MB QUART
MB QUART Crunch GP-1000.2 Quick start installation guide

Audio Control
Audio Control Maestro M2e Owner's enjoyment manual

d & b audiotechnik
d & b audiotechnik E-PAC Hardware manual