ALC AWSC36 User manual

Model AWSC36
Wireless Made Simple.
Wireless Outdoor
Surveillance Camera
Remote Monitoring Anytime from Anywhere
QUICK START GUIDE
ACCESSORY
Compatible with ALC AWS3266 Connected
Video Surveillance System

CAMERA MOUNTING
AC power cable
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is
recommended to install camera under shelter to protect from direct exposure to
sunlight and other environmental elements. Avoid pointing a camera directly at
any bushes or tree branches or objects that may naturally move due to winds.
CAMERA INSTALLATION + SETUP
1 2 43
Tip: Plan the location of your camera for optimal viewing and proximity to AC Power outlets, (1) power extension
cable is included.
NOTE: Avoid installing in a location which requires the Wireless signal to pass through cement, concrete and metal
structures. This will reduce the transmission range.
Secure the multi-position
camera stand to a stable
surface, ceiling or wall.
Loosen the T-Bolt on the camera
stand and adjust viewing angle using
the Thumb Screw to rotate position.
Align hole on bottom of camera
with T-Bolt to install camera.
Screw antenna into rear of camera.
Attach power cable to power
extension cord AC Adapter.
Plug into electric outlet.
Indoor/Outdoor Camera
Antenna
Multi-position
Camera Stand
Thumb screw
Camera Stand T-Bolt
Outdoor camera with
multi-position stand
AC power adapter
Power extension cable
Camera Installation
Screw Pack
Quick Start Guide
IN THE BOX
AC Power cord
In-line Pairing
Button
Let’s Get Started
Model AWSC36
REQUIRES ALC AWS3266 WIRELESS SURVEILLANCE SYSTEM TO WORK.
1
2
3
PAIRING ADDITIONAL
CAMERAS TO CONTROL PANEL
The AWS3266 Wireless Surveillance System supports up to four
(4) wireless surveillance cameras. Use the following steps to pair
each additional camera.
From the Main Menu on the Control Panel,
select the CAMERA SET UP icon
Select camera
station to
be paired
Tap the CAMERA STATION you want to pair;
a 60-second timer will start.
Within 60 seconds, press the PAIRING KEY once on the camera’s
power cord. The timer will stop when the camera is paired.
Go to Home Screen to view live cameras on the Control
Panel Monitor.
AC power cable
Camera In-line
Pairing Button
For detailed installation and setup, please refer to the Model AWSC36
extended User’s Guide available on our website:
www.atomslabs.com/support
SCAN
TO VIEW COMPLETE USER’S GUIDE
Passive
Infrared Sensor
Infrared
LED sensors
Ceiling Mount
Surface Mount