D-Link DCS-930L Manual

-1-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
Technical Support Setup Procedure
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via
Setup Wizard Software
Release date : 29/08/2011
Model Support : DCS-930L/DCS-932L
H/W:A1
S/W:1.00

-2-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
Technical Support Setup Procedure
Wizard) –DCS-930L & DCS-932L
Setup Wizard
1: Setup CD DCS-930L/932L 
SetupWizard.exe 
Start>Programs>D-Link>D-Link Setup Wizard, 
Note : 
(wired)/
 (wireless)

-3-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
2 : 
MAC Address Wizard

-4-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
3: (Admin ID) (password) 
 
(Admin ID) (password)blank) (Admin
ID) (password)Changed 
(Admin ID) (password)Next

-5-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
4 : DHCP 
Static IP 
IP address , subnet mask , default gateway DNS 



-6-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
5: 
Wireless: Enable
Connection Mode: Infrastructure
Network Name (SSID), Wireless Channel, Security Mode, Authentication Encryption 
 Next.
disable “Wireless” Next

-7-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
6: Back Restart 


-8-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
 7:  Link 
Internet Explorer,
Mozilla Firefox Safariaddress 
http://192.168.2.100 Enter 

 username)(password) 


-9-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00

-10-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
Technical Support Setup Procedure
Setup Wizard - Setting Up DCS-930L & DCS-932L WITH Setup Wizard Software
Step 1: Run the CD Set-Up that came with the DCS-930L/DCS-932L. Please install the Setup
Wizard.exe on your computer. After successful installation, go to Start>Programs>D-Link>D-Link
Setup Wizard, click to run the software.
Note: Please ensure you have connected your ip camera to the LAN port of your router.
Your PC is connected to the router via wired/wireless.
Step 2: Run the software. Your camera’s IP Address will be displayed here along with its
corresponding MAC address. Click Wizard.

-11-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
Step 3: You must change the Admin ID and password immediately to protect your camera against
unauthorized access. By default, the Admin ID and Password column are blank. To change the
Admin ID and password, check both Change Boxes and enter a new ID and password. Click Next.
Step 4: The default ip setting is DHCP, which means it will obtain the ip address assigned by your
router automatically. If you want to use Static IP, please enter the IP address, subnet mask,
default gateway and DNS settings for your camera. These settings must correspond with your
network settings for you to access the camera. Please check with your network administrator if you
are not sure of what these settings should be.

-12-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
Step 5: For wireless connection setup, please configure the following:
Wireless: Enable
Connection Mode: Infrastructure
The Network Name (SSID), Wireless Channel, Security Mode, Authentication and Encryption
must correspond with the wireless network settings on your router. Click Next.
If you want to connect your camera via a network cable, please disable “Wireless”. Click Next.

-13-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
Step 6: Click Back to modify your settings. Otherwise, click Restart to save your settings. Your setup
is now completed!

-14-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
Step 7: Click Link button to launch the web browser and access to the WEB Interface of your camera.
You may access the WEB Interface directly by opening a web browser such as Internet Explorer,
Mozilla Firefox or Safari. On the address bar, type in the IP Address of the camera that you have
configured just now, in this example http://192.168.2.100, press Enter key on your keyboard.
Please enter the username and password that you have configured just now to login your camera.

-15-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00

-16-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
 
Call Center  02-6617997
: 9.00 –18.00 
Thai: Mon –Fri : Time 9.00 –18.00.
: 18.00 
English : Sat –Sun , Public Holiday and after 18.00 weekday.
Website : www.dlink.co.th
email: [email protected].sg
Facebook : http://www.facebook.com/DLinkThailandFans

-17-
FAQ : Setup Wizard - Setting Up DCS-930L & DCS-932L via Setup Wizard Software version 1.00
Nationwide D-Link Service Centres