Alcatel onetouch link 4G y858 User manual

Quick Start Guide

2
www.sar-tick.com
This product meets applicable national
SAR limits of 2.0W/kg.
The specic maximum SAR values can
be found in the Radio Waves section
of this user guide.
When carrying the product or using
it while worn on your body, either
use an approved accessory such as
a holster or otherwise maintain a
distance of 5 mm from the body to
ensure compliance with RF exposure
requirements. Note that the product
may be transmitting even if you are
not surng internet.
Safety and use
We recommend that you read this chapter carefully before
using this device.The manufacturer disclaims any liability for
damage, which may result as a consequence of improper
use of this device or of use contrary to the instructions
contained herein.
Do not switch on your device when its use is
prohibited or when using the device may cause
interference or danger.
Follow rules or regulations in hospitals and
health care facilities. Switch off your device near
medical apparatus.

3
Switch off your device in an aircraft.The device
may cause interference to aircraft control
signals.
Switch off your device near high-precision
electronic devices. The device may affect the
performance of these devices.
Do not attempt to disassemble your device or
its accessories. Only qualied personnel are
allowed to service or repair the device.
Do not place your device or its accessories in
containers with a strong electromagnetic eld.
Do not place magnetic storage media near your
device. Radiation from the device may erase the
information stored on them.
Do not subject your device to high temperatures
or use it in a place with ammable gas such as
a petrol station.
Keep your device and its accessories away from
children. Do not allow children to use your
device without guidance.
Only use approved batteries and chargers to
avoid the risk of explosion.
Observe the laws or regulations on device use.
Respect others’ privacy and legal rights when
using your device.
It is recommended that the equipment only be used in an
environment where the temperature is between -10°C and
50°C and humidity is between 10% to 90%.

4
CHARGERS
Mains powered chargers will operate within the
temperature range of: 0°C to 40°C.
The chargers designed for your device meet with the
standard for safety of information technology equipment
and ofce equipment use.
They are also compliant to the ecodesign directive
2009/125/EC. Due to different applicable electrical
specications, a charger you purchased in one jurisdiction
may not work in another jurisdiction.They should be used
for this purpose only.
1. Overview
Y858 is a portable wireless router, providing a simple way to
share 4G with any Wi-Fi embedded device.
1.1 Package contents
Y858 USB cable
Quick start guide Charger

5
1.2 Application
PC
PAD Smart phone
1.3 Device overview
①②
③
④
① ②
Number Description
①Power on/off Key
②WPS Key

6
Number Description
③LED light
④Micro USB Interface
Use the device’s 2 buttons as follows:
Button Description
① Power
On/Off
Long press to turn on/off the device
Short press to put the LED in either active
or sleep mode.
② WPS
Long press to turn on WPS
Short press to put the LED in either active
or sleep mode
1.4 Turning on the device
Step 1: Open back cover from Bottom of right corner,
then take out battery and put SIM card as remark.
Step 2: Long Press the Power On/Off button.

7
1.5 LED Display
The LED display is interpreted as follows:
Network Indicator(Red or Blue LED)
Wi-Fi indicator (Blue LED)
SMS indicator (Blue LED)
Battery indicator (Red or Blue LED)
LED description:
Category Icon Display
Network
Indicator
Light Blue LED when connect to internet
or ash when no internet service;
Light Red LED when no Network/no
service/no SIM card
Wi-Fi
indicator Light Blue LED when Wi-Fi active
SMS
indicator
Light Blue LED when new message coming
or ash when SMS full
Battery
indicator
Light Red LED for low power alarm; Light
Blue LED during charging
1.6 Driver Installation
1. Power on router and connect router to client end (PC/
Tablet etc.), autorun driver will pop out automatically,
click “Install”. If no antorun, please go to Computer >

8
removable storage device to nd Web Connection
driver as blew.
2. Double click “Web Connceiton”, go to “autorun” exe.
le and click it to install.
3. Installation process as below.
4. Desktop Icon will be generated after Installation nish.
1.7 Connecting in Wi-Fi mode
SSID: locate the SSID information on the sticker on Back
Cover.
Step 1: Use the Wi-Fi manager on the Wi-Fi embedded
device to select network name (SSID).
• From a Windows PC: Right-click Wireless network
connection on the task bar, and select: View Available
Networks.
Choose SSID from the list of available networks.
• From a Mac computer: Select System Preferences ->
Network -> Airport. Click “Advanced” to choose SSID
from the list of available networks.

9
• From an iOS device: Settings ->Wi-Fi. Choose SSID from
the available networks.
• From an android device: Settings -> Wireless controls ->
Wi-Fi settings.Choose SSID from the available networks.
Step 2: Enter the Wi-Fi key when prompted for a security
key.
2. Quick Setup
Open your browser,and input the address http://192.168.1.1
to access the login page.
Default login password: admin
Login and click “Setting” to congure the basic settings.
Admin Password:
• Login Password: Set the password for login.
Wi-Fi Settings:
• SSID: Set the network name of this device.
• Security: Congure the security mode for Wi-Fi
connection.
3. Charging the device
You have two ways to charge your device.
Wall Charger charging:
Connect USB cable with Charger head and device, then
charging begin.
When the device is powered off, charging will take a
maximum of 3 hours.

10
USB Charger charging
You can also charge the device by connecting it to a PC
with the USB cable.
When the device is powered off, charging will take a
maximum of 4 hours.
Note: In order to protect the battery, when low power
LED indicator ash, please charge the device.
4. Certication
WEEE Approval
This device is in compliance with the essential requirements
and other relevant provisions of the Waste Electrical and
Electronic Equipment Directive 2012/19/EU (WEEE
Directive).
This symbol on device means that these
products must be taken to collection points at
the end of their life:
- Municipal waste disposal centres with specic
bins for these items of equipment.
- Collection bins at points of sale.
They will then be recycled, preventing substances being
disposed of in the environment, so that their components
can be reused.
In European Union countries:
These collection points are accessible free of charge.
All products with this sign must be brought to these
collection points.

11
In non European Union jurisdictions:
Items of equipment with this symbol are not to be thrown
into ordinary bins if your jurisdiction or your region has
suitable recycling and collection facilities; instead they are
to be taken to collection points for them to be recycled.
RoHs Approval
This device is in compliance with the restriction of the use
of certain hazardous substances in electrical and electronic
equipment Directive 2011/65/EC (RoHs Directive).
Radio Waves
Proof of compliance with international standards (ICNIRP)
or with European Directive 1999/5/EC (R&TTE) is required
of all modem models before they can be put on the market.
The protection of the health and safety for the user and any
other person is an essential requirement of these standards
or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES
FOR EXPOSURE TO RADIO WAVES.
This device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves
(radio frequency electromagnetic elds) recommended by
international guidelines. The guidelines were developed by
an independent scientic organization (ICNIRP) and include
a substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of
measurement known as the Specic Absorption Rate, or
SAR.The SAR limit for mobile devices is 2 W/kg.

12
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest certied
power level in all tested frequency bands.The highest SAR
values under the ICNIRP guidelines for this device model
are:
Maximum SAR for this model and conditions under
which it was recorded.
Body-worn SAR 1.15 W/kg LTE Band 7
During use, the actual SAR values for this device are usually
well below the values stated above. This is because, for
purposes of system efciency and to minimize interference
on the network, the operating power of your mobile device
is automatically decreased when full power is not needed
for the call.The lower the power output of the device, the
lower its SAR value.
Body-worn SAR testing has been carried out at a separation
distance of 5mm. To meet RF exposure guidelines during
body-worn operation, the device should be positioned at
least this distance away from the body. If you are not using
an approved accessory ensure that whatever product is
used is free of any metal and that it positions the phone the
indicated distance away from the body.
The World Health Organization has stated that present
scientic information does not indicate the need for any
special precautions for the use of mobile devices. They
recommend that if you are interested in further reducing
your exposure then you can easily do so by limiting your
usage or keep the device away from the head and body.

13
For more information you can go to www.alcatelonetouch.com;
Additional information about electromagnetic elds
and public health are available on the following site:
http://www.who.int/peh-emf
This device is equipped with a built-in antenna. For optimal
operation, you should avoid touching it or degrading it.
Warranty
The device is warranted against any deviation from technical
specications for a period of twelve (12) (1) months from the
date specied on your original invoice.
Under the terms of this warranty, you must immediately
inform your vendor in case of a conformity defect on this
device, and present a proof of purchase.
The vendor or repair center will decide whether to replace
or repair this device, as appropriate.
Repaired or replaced this device is warranted ONE (1)
month unless there are statutory provisions to the contrary.
This warranty shall not apply to damage or defects to this
device due to:
1) Not following the instructions for use or installation,
2) Not being compliant with technical and safety standards
applicable in the geographical area where this device
is used,
3) Improper maintenance of sources of energy, and of the
overall electric installation,
(1) The warranty period may vary depending on your country.

14
4) Accidents or consequences of theft of the vehicle in which
this device is transported, acts of vandalism, lightning, re,
humidity, inltration of liquids, inclement weather,
5) Connecting to or integrating into this device any
equipment not supplied or not recommended by the
manufacturer,
6) Any servicing, modication or repair performed by
individuals not authorised by the manufacturer, the
vendor or the approved maintenance centre,
7) Use of this device for a purpose other than that for
which it was designed,
8) Malfunctions caused by external causes (e.g., radio
interference from other equipment, power voltage
uctuations),
9) Faulty connections resulting from unsatisfactory radio
transmission or caused by the absence of radio relay
coverage.
Warranty is also excluded for this device on which markings
or serial numbers have been removed or altered.
This device is also warranted against hidden defects (defects
inherent in the design, manufacture, etc.).
There are no other express warranties than this printed
limited warranty, expressed or implied, of any nature
whatsoever.
In no event shall the manufacturer be liable for incidental or
consequential damages of any nature whatsoever, including
but not limited to trading loss, commercial loss, to the
full extent those damages can be disclaimed by law. Some
countries/states do not allow the exclusion or limitation
of incidental or consequential damages, or limitation of the

15
duration of implied warranties, so the preceding limitations
or exclusions may not apply to you.
Alcatel is a trademark of Alcatel-Lucent used under license
by TCL Communication LTD.
All rights reserved © 2014-2016 TCL Communication LTD.
Address: Room 1910-12A, Tower 3, China HK City, 33
Canton Road,Tsimshatsui, Kowloon, Hong Kong

Freely download the App that helps you remotely control LINK mobile WiFi
iOS versionAndroid version
LINK APP
Note: LINK APP and Web UI share same password. Default password is: admin
LINK APP
CJE000022AAB
Freely download the App that helps you remotely control LINK mobile WiFi
1 Make sure your device is connected to the Net
2 Scan the QR Code
3 Download the LINK APP from App StoreSM or Google Play™ store
4 Click on LINK APP icon to log on to the management page
Alcatel name is a trademark of Alcatel-Lucent used under license by TCL Communication Ltd.
Onetouch is a trademark or registered trademark of TCL Communication Ltd.
App Store is a trademarks of Apple Inc.
Google Play is a trademark of Google Inc.